{"schemaVersion":1,"site":"https://configmyrig.com","catalogVersion":"c0f941ad1c69212b","source":"Config My Rig public evidence catalog","notice":"Dated source snapshots, not live inventory. Unknowns remain null or explicitly unverified. Product prices are per stated configuration/unit; fitment and video scope require confirmation.","categories":[{"id":"wheels","slug":"wheels-and-tires","name":"Wheels & tires","intro":"Compare wheel diameter, width and offset alongside tire dimensions, weight, construction and clearance requirements."},{"id":"suspension","slug":"suspension","name":"Suspension","intro":"Compare complete systems and shock packages. Match front and rear springs to permanent equipment loads before choosing lift height."},{"id":"brakes","slug":"brakes","name":"Brakes","intro":"Pads, rotors, calipers and matched axle systems, with contents, wheel-clearance checks and installation scope kept separate."},{"id":"bumpers","slug":"bumpers-and-recovery","name":"Bumpers & recovery","intro":"Plan bumpers, winches, recovery mounting, electrical supply, sensor integration and front equipment weight together."},{"id":"roof","slug":"roof-and-camping","name":"Roof & camping","intro":"Racks, tents, awnings and rooftop storage. Count mounting hardware, loaded cargo and finished vehicle height."},{"id":"steps","slug":"steps-and-rock-sliders","name":"Steps & rock sliders","intro":"Compare entry steps and frame-mounted protection by intended use, mounting, product mass and factory equipment removed."},{"id":"body","slug":"exterior-and-protection","name":"Exterior & protection","intro":"Mud flaps, skid plates and exterior equipment. Check clearance, service access and compatibility with adjacent parts."},{"id":"lighting","slug":"lighting","name":"Lighting","intro":"Compare lights and mounting hardware, then plan fused supply, switching, beam pattern and permitted use."},{"id":"cargo","slug":"interior-and-cargo","name":"Interior & cargo","intro":"Plan drawers, refrigerators, slides, MOLLE panels and cargo foundations as one anchored, accessible interior layout."},{"id":"power","slug":"power-and-electrical","name":"Power & electrical","intro":"Separate energy storage, charging, distribution and switching. Verify LC250 hybrid compatibility and complete circuit requirements."},{"id":"air","slug":"onboard-air","name":"Onboard air","intro":"Compare portable and onboard compressors, manifolds, mounts and hoses, including power supply, ventilation and installation scope."},{"id":"fuel","slug":"fuel-and-range","name":"Fuel & range","intro":"Compare auxiliary and replacement tanks, containers and mounts. Plan full-fuel weight, spare location, compatibility and installation requirements."}],"brands":[{"name":"ARB","slug":"arb","path":"/brands/arb"},{"name":"BACKWOODS ADVENTURE MODS","slug":"backwoods-adventure-mods","path":"/brands/backwoods-adventure-mods"},{"name":"BFGoodrich","slug":"bfgoodrich","path":"/brands/bfgoodrich"},{"name":"BLAZE OFF-ROAD","slug":"blaze-off-road","path":"/brands/blaze-off-road"},{"name":"BUDBUILT","slug":"budbuilt","path":"/brands/budbuilt"},{"name":"C4 FABRICATION","slug":"c4-fabrication","path":"/brands/c4-fabrication"},{"name":"CASCADIA 4X4","slug":"cascadia-4x4","path":"/brands/cascadia-4x4"},{"name":"DISSENT OFF-ROAD","slug":"dissent-off-road","path":"/brands/dissent-off-road"},{"name":"DOBINSONS","slug":"dobinsons","path":"/brands/dobinsons"},{"name":"DOMETIC","slug":"dometic","path":"/brands/dometic"},{"name":"DV8 OFFROAD","slug":"dv8-offroad","path":"/brands/dv8-offroad"},{"name":"ECOFLOW","slug":"ecoflow","path":"/brands/ecoflow"},{"name":"EIBACH","slug":"eibach","path":"/brands/eibach"},{"name":"FALKEN","slug":"falken","path":"/brands/falken"},{"name":"FK Industries","slug":"fk-industries","path":"/brands/fk-industries"},{"name":"FOX","slug":"fox","path":"/brands/fox"},{"name":"FRONT RUNNER","slug":"front-runner","path":"/brands/front-runner"},{"name":"GOOSE GEAR","slug":"goose-gear","path":"/brands/goose-gear"},{"name":"HELIVUE DESIGN","slug":"helivue-design","path":"/brands/helivue-design"},{"name":"ICECO","slug":"iceco","path":"/brands/iceco"},{"name":"ICON Vehicle Dynamics","slug":"icon-vehicle-dynamics","path":"/brands/icon-vehicle-dynamics"},{"name":"iKamper","slug":"ikamper","path":"/brands/ikamper"},{"name":"IRONMAN 4X4","slug":"ironman-4x4","path":"/brands/ironman-4x4"},{"name":"JACKERY","slug":"jackery","path":"/brands/jackery"},{"name":"KC HiLiTES","slug":"kc-hilites","path":"/brands/kc-hilites"},{"name":"KING SHOCKS","slug":"king-shocks","path":"/brands/king-shocks"},{"name":"LONG RANGE AMERICA","slug":"long-range-america","path":"/brands/long-range-america"},{"name":"METHOD","slug":"method","path":"/brands/method"},{"name":"MICKEY THOMPSON","slug":"mickey-thompson","path":"/brands/mickey-thompson"},{"name":"MORRFlate","slug":"morrflate","path":"/brands/morrflate"},{"name":"NITTO","slug":"nitto","path":"/brands/nitto"},{"name":"NOMAD","slug":"nomad","path":"/brands/nomad"},{"name":"Old Man Emu","slug":"old-man-emu","path":"/brands/old-man-emu"},{"name":"POWERBRAKE","slug":"powerbrake","path":"/brands/powerbrake"},{"name":"POWERSTOP","slug":"powerstop","path":"/brands/powerstop"},{"name":"PRINSU","slug":"prinsu","path":"/brands/prinsu"},{"name":"RCI OFFROAD","slug":"rci-offroad","path":"/brands/rci-offroad"},{"name":"REDARC","slug":"redarc","path":"/brands/redarc"},{"name":"RIGd Supply","slug":"rigd-supply","path":"/brands/rigd-supply"},{"name":"ROAM","slug":"roam","path":"/brands/roam"},{"name":"ROKBLOKZ","slug":"rokblokz","path":"/brands/rokblokz"},{"name":"ROTOPAX","slug":"rotopax","path":"/brands/rotopax"},{"name":"RRW","slug":"rrw","path":"/brands/rrw"},{"name":"SCS","slug":"scs","path":"/brands/scs"},{"name":"SDHQ","slug":"sdhq","path":"/brands/sdhq"},{"name":"SHERPA","slug":"sherpa","path":"/brands/sherpa"},{"name":"SLEE","slug":"slee","path":"/brands/slee"},{"name":"SOLID WOOD WORX","slug":"solid-wood-worx","path":"/brands/solid-wood-worx"},{"name":"TORTUGA OFFROAD","slug":"tortuga-offroad","path":"/brands/tortuga-offroad"},{"name":"TOYO","slug":"toyo","path":"/brands/toyo"},{"name":"Toyota Genuine","slug":"toyota-genuine","path":"/brands/toyota-genuine"},{"name":"VIAIR","slug":"viair","path":"/brands/viair"},{"name":"VICTORY 4X4","slug":"victory-4x4","path":"/brands/victory-4x4"},{"name":"WARN","slug":"warn","path":"/brands/warn"}],"products":[{"id":"acc-backwoods-hidden","slug":"backwoods-hidden-winch-bumper","path":"/products/backwoods-hidden-winch-bumper","name":"Backwoods hidden winch bumper","brand":"BACKWOODS ADVENTURE MODS","brandPath":"/brands/backwoods-adventure-mods","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-backwoods-hidden","cat":"bumpers","subcat":"Bumpers","name":"Backwoods hidden winch bumper","slot":"bumper","modelId":"hidden","brand":"BACKWOODS ADVENTURE MODS","sku":"BWTC5F-9925","variant":"Default Title","source":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-front-bumper?variant=41914032619543","price":799,"image":"acc-backwoods-hidden","gross":37,"weight":null,"weightVerified":false,"hmin":4,"hmax":6,"desc":"Hybrid aluminum shell and steel winch cradle for the LC250.","specs":"37 lb gross; 10 lb shell + 27 lb cradle; minor cutting.","explain":"Factory parts removed and winch weight are separate. Confirm sensors, recovery points and winch dimensions.","realAccessory":true,"icon":"▰","visual":"hidden","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Aluminum shell, steel cradle and listed mounting hardware. Winch not included.","deps":[],"checks":[{"label":"Cutting, sensors and winch envelope","status":"check","detail":"Minor bumper cutting is required. Confirm trim/sensor integration and exact winch size.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"}],"available":true,"offers":[{"seller":"Backwoods Adventure Mods","price":799,"url":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-front-bumper?variant=41914032619543"}],"imageSource":"https://cdn.shopify.com/s/files/1/2236/0699/files/backwoods-land-cruiser-250-lc250-front-bumper-installed.webp?v=1770641729","label":"Default Title","choice":null,"url":"/products/backwoods-hidden-winch-bumper","priceAmount":799,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[4,6],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Aluminum shell, steel cradle and listed mounting hardware. Winch not included."},{"label":"Cutting, sensors and winch envelope","status":"check","detail":"Minor bumper cutting is required. Confirm trim/sensor integration and exact winch size.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Factory parts removed and winch weight are separate. Confirm sensors, recovery points and winch dimensions."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"bw-hidden","productIds":["acc-backwoods-hidden"],"type":"video","title":"LC250 hidden winch bumper installation","url":"https://www.youtube.com/watch?v=1O21_UBXWmw","publisher":"Backwoods Adventure Mods","scope":"Official · LC250 hidden bumper","note":"Linked as Land Cruiser 250 Front in the manufacturer installation library. Winch installation and wiring are separate.","match":"exact","official":true,"source":"https://backwoodsadventuremods.com/pages/installation-instructions","purpose":"installation","checked":"2026-10-25","creator":"Backwoods Adventure Mods"}],"reviews":[{"id":"backwoods-hidden-install","productIds":["acc-backwoods-hidden"],"author":"ToyotaTex","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 hidden bumper; exact revision not independently established","context":"LC250 with Backwoods bumper/rack/sliders bundle","summary":"Describes straightforward installation and likes the separate aluminum shell and steel cradle.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-dv8-spec","slug":"dv8-spec-series-front-bumper","path":"/products/dv8-spec-series-front-bumper","name":"DV8 Spec Series front bumper","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-spec","cat":"bumpers","subcat":"Bumpers","name":"DV8 Spec Series front bumper","slot":"bumper","modelId":"bumper","brand":"DV8 OFFROAD","sku":"FBTL4-02","variant":"Default Title","source":"https://dv8offroad.com/products/land-cruiser-250-front-bumper?variant=42156704628807","price":1049.99,"image":"acc-dv8-spec","gross":null,"weight":null,"weightVerified":false,"hmin":6.5,"hmax":6.5,"desc":"LC250 front bumper with winch and auxiliary-light provisions.","specs":"FBTL4-02; 20-inch center light-bar mount; pod-light mounting points.","explain":"Lighting and winch sold separately. Confirm dimensions, sensors and bodywork.","realAccessory":true,"icon":"▰","visual":"bumper","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Winch / lighting choices","status":"check","detail":"Verify chosen winch dimensions and the separate lighting mounts. Do not assume lights or a winch are in the bumper price.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":1049.99,"url":"https://dv8offroad.com/products/land-cruiser-250-front-bumper?variant=42156704628807"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/Land-Cruiser-250-Spec-Series-Front-Bumper-1.jpg?v=1762363640","manufacturerHours":true,"laborSource":"https://dv8offroad.com/products/land-cruiser-250-front-bumper?variant=42156704628807","label":"Default Title","choice":null,"url":"/products/dv8-spec-series-front-bumper","priceAmount":1049.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[6.5,6.5],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Winch / lighting choices","status":"check","detail":"Verify chosen winch dimensions and the separate lighting mounts. Do not assume lights or a winch are in the bumper price.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Lighting and winch sold separately. Confirm dimensions, sensors and bodywork."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-FBTL4-02","productIds":["acc-dv8-spec"],"type":"manual","title":"FBTL4-02 installation manual","url":"https://dv8offroad.com/cdn/shop/files/FBTL4-02_Installation_Guide_Final.pdf?v=11969047724342924501","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / FBTL4-02","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/FBTL4-02_Installation_Guide_Final.pdf?v=11969047724342924501","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-dv8-centric","slug":"dv8-centric-winch-bumper","path":"/products/dv8-centric-winch-bumper","name":"DV8 Centric winch bumper","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-centric","cat":"bumpers","subcat":"Bumpers","name":"DV8 Centric winch bumper","slot":"bumper","modelId":"hidden","brand":"DV8 OFFROAD","sku":"FBTL4-01","variant":"Default Title","source":"https://dv8offroad.com/products/250-series-land-cruiser-winch-bumper?variant=41323333582919","price":699.99,"image":"acc-dv8-centric","gross":null,"weight":null,"weightVerified":false,"hmin":4.5,"hmax":4.5,"desc":"Center-section LC250 bumper with an integrated winch mounting position.","specs":"FBTL4-01; 20-inch single-row light-bar mounting provision; cutting required.","explain":"Choose against the exact winch envelope and retain required factory systems.","realAccessory":true,"icon":"▰","visual":"hidden","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Body cutting and sensor review","status":"check","detail":"Minor cutting is required. Verify grade, sensors, winch access and fairlead.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":699.99,"url":"https://dv8offroad.com/products/250-series-land-cruiser-winch-bumper?variant=41323333582919"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/Toyota-Land-Cruiser-250-series-Centric-Front-Bumper-1.jpg?v=1751295240","manufacturerHours":true,"laborSource":"https://dv8offroad.com/products/250-series-land-cruiser-winch-bumper?variant=41323333582919","label":"Default Title","choice":null,"url":"/products/dv8-centric-winch-bumper","priceAmount":699.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[4.5,4.5],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Body cutting and sensor review","status":"check","detail":"Minor cutting is required. Verify grade, sensors, winch access and fairlead.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Choose against the exact winch envelope and retain required factory systems."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-FBTL4-01","productIds":["acc-dv8-centric"],"type":"manual","title":"FBTL4-01 installation manual","url":"https://dv8offroad.com/cdn/shop/files/FBTL4-01_Installation_Guide_Final.pdf?v=8832108060391096626","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / FBTL4-01","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/FBTL4-01_Installation_Guide_Final.pdf?v=8832108060391096626","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"0b6faaa5-548e-4acb-87c0-1d9ce12a4d28","productIds":["acc-dv8-centric"],"author":"CP","date":"2025-01-05","source":"https://dv8offroad.com/products/250-series-land-cruiser-winch-bumper?variant=41323333582919","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"LC250 product page","summary":"Praises construction; says access to the winch clutch is tight for larger hands.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"7701d96e-54ff-471e-afa0-bfac28b7f666","productIds":["acc-dv8-centric"],"author":"Insanoflexathf","date":"2025-02-10","source":"https://dv8offroad.com/products/250-series-land-cruiser-winch-bumper?variant=41323333582919","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"LC250 bumper model; installation/crash protection not certified","context":"LC250 product page","summary":"Likes retaining the factory appearance and winch mounting; raises concern about removing factory crash bars.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-warn-vr10","slug":"warn-vr-evo-10-s","path":"/products/warn-vr-evo-10-s","name":"WARN VR EVO 10-S","brand":"WARN","brandPath":"/brands/warn","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-warn-vr10","cat":"bumpers","subcat":"Winches","name":"WARN VR EVO 10-S","slot":"winch","modelId":"winch","brand":"WARN","sku":"W36103253","variant":"Default Title","source":"https://www.warn.com/products/vr-evo-10-s-winch-103253?variant=62541236765043","price":949.99,"image":"acc-warn-vr10","gross":null,"weight":null,"weightVerified":false,"hmin":2,"hmax":3,"desc":"10,000-lb winch with synthetic rope; universal equipment.","specs":"103253; 90 ft of 3/8-inch synthetic rope; black hawse fairlead.","explain":"Vehicle and bumper suitability must be established. Add a compatible mount and dedicated high-current wiring.","realAccessory":true,"icon":"▰","visual":"winch","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Winch, synthetic rope, hawse fairlead and listed control equipment.","deps":[{"label":"Compatible winch mount","slots":["bumper"],"note":"Verify the exact winch envelope, bolt pattern, control-box location and fairlead arrangement.","page":"bumpers","ids":[]}],"checks":[{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"}],"available":true,"offers":[{"seller":"Warn","price":949.99,"url":"https://www.warn.com/products/vr-evo-10-s-winch-103253?variant=62541236765043"}],"imageSource":"https://cdn.shopify.com/s/files/1/0893/1658/9939/files/103253_warn_vr-evo-10-s_main.webp?v=1776364537","label":"Default Title","choice":null,"url":"/products/warn-vr-evo-10-s","priceAmount":949.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[2,3],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Winch, synthetic rope, hawse fairlead and listed control equipment."},{"label":"Compatible winch mount","status":"check","detail":"Verify the exact winch envelope, bolt pattern, control-box location and fairlead arrangement.","page":"bumpers"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Vehicle and bumper suitability must be established. Add a compatible mount and dedicated high-current wiring."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"warn-guide","productIds":["acc-warn-vr10"],"type":"manual","title":"VR EVO installation guide · 103484.A7","url":"https://literature.warn.com/view/153618375/","publisher":"WARN Industries","scope":"VR EVO winch series · includes 10-S","note":"Winch-series installation guide, linked from WARN product literature. Vehicle bumper and control-pack relocation requirements are separate.","match":"family","official":true,"source":"https://www.warn.com/pages/product-literature?downloadId=1905","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-dv8-rack","slug":"dv8-spec-series-roof-rack","path":"/products/dv8-spec-series-roof-rack","name":"DV8 Spec Series roof rack","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"roof","categorySlug":"roof-and-camping","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-rack","cat":"roof","subcat":"Racks","name":"DV8 Spec Series roof rack","slot":"rack","modelId":"rack","brand":"DV8 OFFROAD","sku":"RRTL4-01","variant":"Default Title","source":"https://dv8offroad.com/products/land-cruiser-250-series-lexus-gx-550-roof-rack?variant=41920410320967","price":1199.99,"image":"acc-dv8-rack","gross":null,"weight":null,"weightVerified":false,"hmin":6,"hmax":6,"desc":"LC250 platform rack with T-slot crossbars and outward-facing mounting bolts.","specs":"RRTL4-01; aluminum platform; retains factory sunroof/antenna.","explain":"Rack and vehicle load limits both apply. Tent, awning, brackets and cargo require a combined roof-load review.","realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Roof capacity and mounted equipment","status":"check","detail":"Confirm vehicle dynamic roof limit and rack instructions. Sum rack, tent, brackets, awning and gear; manufacturer rack capacity does not increase the vehicle limit.","page":"roof"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":1199.99,"url":"https://dv8offroad.com/products/land-cruiser-250-series-lexus-gx-550-roof-rack?variant=41920410320967"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/land-cruiser-250-series-lexus-gx-550-roof-rack-studio-1.jpg?v=1755101956","manufacturerHours":true,"laborSource":"https://dv8offroad.com/products/land-cruiser-250-series-lexus-gx-550-roof-rack?variant=41920410320967","laborNote":"Current product page lists 6 hours; an earlier linked manual quotes 4–5. The catalog uses the current product-page expectation.","label":"Default Title","choice":null,"url":"/products/dv8-spec-series-roof-rack","priceAmount":1199.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[6,6],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Roof capacity and mounted equipment","status":"check","detail":"Confirm vehicle dynamic roof limit and rack instructions. Sum rack, tent, brackets, awning and gear; manufacturer rack capacity does not increase the vehicle limit.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Rack and vehicle load limits both apply. Tent, awning, brackets and cargo require a combined roof-load review."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-RRTL4-01","productIds":["acc-dv8-rack"],"type":"manual","title":"RRTL4-01 installation manual","url":"https://dv8offroad.com/cdn/shop/files/RRTL4-01_installation_guide_final.pdf?v=5311597753915378382","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / RRTL4-01","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/RRTL4-01_installation_guide_final.pdf?v=5311597753915378382","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"b93e4b8f-17ab-4c0f-b840-4e105e1cea9c","productIds":["acc-dv8-rack"],"author":"Gerald Guidroz","date":"2025-11-10","source":"https://dv8offroad.com/products/land-cruiser-250-series-lexus-gx-550-roof-rack?variant=41920410320967","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"LC250/GX550 listing; reviewer vehicle not stated","summary":"Likes the design, but reports warped side pieces, difficult hole alignment and coated threads during installation.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"dv8-rack-owner","productIds":["acc-dv8-rack"],"author":"cozen_cruiser250","date":"2025-11-20","source":"https://www.landcruiserforum.com/threads/anyone-else-have-the-dv8-roof-rack-better-alternatives.7630/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 DV8 rack model; accessory load varies","context":"LC250 with camping gear; economy not controlled for other factors","summary":"Likes construction and low wind noise, but reports T-slot hardware difficulty and lower fuel economy.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-backwoods-rack","slug":"backwoods-driftr-roof-rack","path":"/products/backwoods-driftr-roof-rack","name":"Backwoods DRIFTR roof rack","brand":"BACKWOODS ADVENTURE MODS","brandPath":"/brands/backwoods-adventure-mods","category":"roof","categorySlug":"roof-and-camping","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-backwoods-rack","cat":"roof","subcat":"Racks","name":"Backwoods DRIFTR roof rack","slot":"rack","modelId":"rack","brand":"BACKWOODS ADVENTURE MODS","sku":"BWTC5L-9890","variant":"Default Title","source":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-roof-rack?variant=41914054311959","price":999,"image":"acc-backwoods-rack","gross":68,"weight":null,"weightVerified":false,"hmin":2,"hmax":4,"desc":"LC250 aluminum rack with a published 68-lb gross weight.","specs":"46.5 × 95 in platform; manufacturer rack rating 300 lb dynamic / 700 lb static.","explain":"Vehicle roof limits can be lower than rack ratings; use the lower applicable limit and include all roof equipment.","realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Vehicle roof limit and tent mounts","status":"check","detail":"Do not use rack ratings as Toyota roof ratings. Verify mounting geometry and total driving load.","page":"roof"}],"available":true,"offers":[{"seller":"Backwoods Adventure Mods","price":999,"url":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-roof-rack?variant=41914054311959"}],"imageSource":"https://cdn.shopify.com/s/files/1/2236/0699/files/toyota-land-cruiser-250-roof-rack-backwoods-driftr-side.webp?v=1769724296","installVideos":[{"url":"https://www.youtube.com/watch?v=382TL0cZT4A","title":"DRIFTR LC250 roof rack installation","creator":"Backwoods Adventure Mods","scope":"Manufacturer · LC250 rack","note":"Manufacturer product page labels this as its installation video. Vehicle grade, chosen hardware and torque values must follow current instructions.","source":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-roof-rack?variant=41914054311959"}],"label":"Default Title","choice":null,"url":"/products/backwoods-driftr-roof-rack","priceAmount":999,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[2,4],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Vehicle roof limit and tent mounts","status":"check","detail":"Do not use rack ratings as Toyota roof ratings. Verify mounting geometry and total driving load.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Vehicle roof limits can be lower than rack ratings; use the lower applicable limit and include all roof equipment."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"bw-rack","productIds":["acc-backwoods-rack"],"type":"video","title":"LC250 / GX550 DRIFTR roof rack installation","url":"https://www.youtube.com/watch?v=382TL0cZT4A","publisher":"Backwoods Adventure Mods","scope":"Official · LC250 / GX550 DRIFTR rack","note":"Manufacturer installation library links this exact rack family. Verify current hardware and roof configuration.","match":"exact","official":true,"source":"https://backwoodsadventuremods.com/pages/installation-instructions","purpose":"installation","checked":"2026-10-25","creator":"Backwoods Adventure Mods"}],"reviews":[],"clearance":null}]},{"id":"acc-ikamper-duo","slug":"ikamper-skycamp-4-0-duo","path":"/products/ikamper-skycamp-4-0-duo","name":"iKamper Skycamp 4.0 Duo","brand":"iKamper","brandPath":"/brands/ikamper","category":"roof","categorySlug":"roof-and-camping","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-ikamper-duo","cat":"roof","subcat":"Tents","name":"iKamper Skycamp 4.0 Duo","slot":"tent","modelId":"tent","brand":"IKAMPER","sku":"MRS4-200R","variant":"Default Title","source":"https://ikamper.com/products/skycamp-4-0-duo?variant=45015984242772","price":4250,"image":"acc-ikamper-duo","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":3,"desc":"Roof tent requiring a verified rack, vehicle roof capacity and mounting arrangement.","specs":"Universal roof tent; two-person configuration.","explain":"Confirm roof driving load, mounting hardware, usable sleeping dimensions, overhang, ladder and garage clearance.","realAccessory":true,"icon":"▰","visual":"tent","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Documented compatible rack","slots":["rack"],"note":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof","ids":[]}],"checks":[{"label":"Roof load, footprint and garage clearance","status":"check","detail":"Tent body, mounting brackets, mattress, ladder and all other roof equipment must be accounted for. Confirm conflicting spacing statements in current manufacturer instructions.","page":"roof"}],"available":true,"offers":[{"seller":"iKamper","price":4250,"url":"https://ikamper.com/products/skycamp-4-0-duo?variant=45015984242772"}],"imageSource":"https://cdn.shopify.com/s/files/1/2254/0887/files/skycamp-40-duo-6701019.jpg?v=1778277668","label":"Default Title","choice":null,"url":"/products/ikamper-skycamp-4-0-duo","priceAmount":4250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[1.5,3],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Documented compatible rack","status":"check","detail":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof"},{"label":"Roof load, footprint and garage clearance","status":"check","detail":"Tent body, mounting brackets, mattress, ladder and all other roof equipment must be accounted for. Confirm conflicting spacing statements in current manufacturer instructions.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm roof driving load, mounting hardware, usable sleeping dimensions, overhang, ladder and garage clearance."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"skycamp4-manual","productIds":["acc-ikamper-duo","acc-ikamper-trio"],"type":"manual","title":"Skycamp 4.0 user and mounting manual","url":"https://cdn.shopify.com/s/files/1/2254/0887/files/Skycamp_4.0_Manual.pdf?v=1775495554","publisher":"iKamper","scope":"Skycamp 4.0 series · Duo / Trio","note":"Covers model specifications, rack spacing, mounting brackets, ladder and use. Choose the pages for your tent; rack and vehicle limits still require confirmation.","match":"family","official":true,"source":"https://cdn.shopify.com/s/files/1/2254/0887/files/Skycamp_4.0_Manual.pdf?v=1775495554","purpose":"installation and setup","checked":"2026-10-25"}],"videos":[{"id":"ikamper-install","productIds":["acc-ikamper-duo","acc-ikamper-trio"],"type":"video","title":"Unboxing & installing your iKamper RTT","url":"https://www.youtube.com/watch?v=GG2PGpBiB0I","publisher":"iKamper Tech","scope":"Official · tent family / mounting reference","note":"Linked under Unboxing & Installation on the manufacturer help page. Not a Skycamp 4.0 Duo/Trio or LC250-specific walkthrough; use the 4.0 manual for model details.","match":"family","official":true,"source":"https://ikamper.com/pages/help-center","purpose":"installation","checked":"2026-10-25","creator":"iKamper Tech"}],"reviews":[{"id":"5c583f66-5c23-4c33-8be4-1c2451221566","productIds":["acc-ikamper-duo"],"author":"Jeff F.","date":"2026-10-22","source":"https://ikamper.com/products/skycamp-4-0-duo?variant=45015984242772","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Vehicle not stated","summary":"Finds setup easy and solo sleeping space generous; wishes the lighting included its own battery.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"28d207bf-d84c-4377-8e13-4c81dc7342f4","productIds":["acc-ikamper-duo"],"author":"Eric S.","date":"2026-09-29","source":"https://ikamper.com/products/skycamp-4-0-duo?variant=45015984242772","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Vehicle not stated; upgraded air/foam mattress mentioned","summary":"Reports gaps near the hinges and dissatisfaction with weather/bug sealing; otherwise describes decent materials.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"ec2c274a-ac5c-5847-bc75-dc7afb36ca51","productIds":["acc-ikamper-duo"],"author":"Mason","date":"2026-08-28","source":"https://ikamper.com/products/skycamp-4-0-duo?variant=45015984242772","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Vehicle not stated","summary":"Reports easy installation and comfortable camping sleep.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"duo-seller","productIds":["acc-ikamper-duo"],"author":"Ryan / Modula Racks","date":"2026-05-26","source":"https://modularacks.ca/blogs/news/ikamper-skycamp-4-0-duo-review","sourceName":"Modula Racks seller-authored hands-on review","kind":"seller","scope":"Exact tent model; different vehicle; short-term seller experience","context":"Jeep Gladiator; seller’s first overnight test","summary":"First-night report praises quietness and interior lighting but dislikes mattress comfort and zipper noise.","sourceVerified":false,"verification":"Commercial relationship: retailer sells this tent","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-ikamper-trio","slug":"ikamper-skycamp-4-0-trio","path":"/products/ikamper-skycamp-4-0-trio","name":"iKamper Skycamp 4.0 Trio","brand":"iKamper","brandPath":"/brands/ikamper","category":"roof","categorySlug":"roof-and-camping","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-ikamper-trio","cat":"roof","subcat":"Tents","name":"iKamper Skycamp 4.0 Trio","slot":"tent","modelId":"tent","brand":"IKAMPER","sku":"MRS4-300R","variant":"Default Title","source":"https://ikamper.com/products/skycamp-4-0-trio?variant=45015993352276","price":4500,"image":"acc-ikamper-trio","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":3,"desc":"Roof tent requiring a verified rack, vehicle roof capacity and mounting arrangement.","specs":"Three-person configuration; 68 1/8 × 52 3/8 in closed footprint; 13 3/4 in closed height. Published component masses: tent/brackets 132 lb; ladder 13 lb; foam mattress 9.3 lb. Confirm final installed total.","explain":"Confirm roof driving load, mounting hardware, usable sleeping dimensions, overhang, ladder and garage clearance.","realAccessory":true,"icon":"▰","visual":"tent","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Documented compatible rack","slots":["rack"],"note":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof","ids":[]}],"checks":[{"label":"Roof load, footprint and garage clearance","status":"check","detail":"Tent body, mounting brackets, mattress, ladder and all other roof equipment must be accounted for. Confirm conflicting spacing statements in current manufacturer instructions.","page":"roof"}],"available":true,"offers":[{"seller":"iKamper","price":4500,"url":"https://ikamper.com/products/skycamp-4-0-trio?variant=45015993352276"}],"imageSource":"https://cdn.shopify.com/s/files/1/2254/0887/files/skycamp-40-trio-2923859.jpg?v=1778277668","label":"Default Title","choice":null,"url":"/products/ikamper-skycamp-4-0-trio","priceAmount":4500,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[1.5,3],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Documented compatible rack","status":"check","detail":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof"},{"label":"Roof load, footprint and garage clearance","status":"check","detail":"Tent body, mounting brackets, mattress, ladder and all other roof equipment must be accounted for. Confirm conflicting spacing statements in current manufacturer instructions.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm roof driving load, mounting hardware, usable sleeping dimensions, overhang, ladder and garage clearance."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"skycamp4-manual","productIds":["acc-ikamper-duo","acc-ikamper-trio"],"type":"manual","title":"Skycamp 4.0 user and mounting manual","url":"https://cdn.shopify.com/s/files/1/2254/0887/files/Skycamp_4.0_Manual.pdf?v=1775495554","publisher":"iKamper","scope":"Skycamp 4.0 series · Duo / Trio","note":"Covers model specifications, rack spacing, mounting brackets, ladder and use. Choose the pages for your tent; rack and vehicle limits still require confirmation.","match":"family","official":true,"source":"https://cdn.shopify.com/s/files/1/2254/0887/files/Skycamp_4.0_Manual.pdf?v=1775495554","purpose":"installation and setup","checked":"2026-10-25"}],"videos":[{"id":"ikamper-install","productIds":["acc-ikamper-duo","acc-ikamper-trio"],"type":"video","title":"Unboxing & installing your iKamper RTT","url":"https://www.youtube.com/watch?v=GG2PGpBiB0I","publisher":"iKamper Tech","scope":"Official · tent family / mounting reference","note":"Linked under Unboxing & Installation on the manufacturer help page. Not a Skycamp 4.0 Duo/Trio or LC250-specific walkthrough; use the 4.0 manual for model details.","match":"family","official":true,"source":"https://ikamper.com/pages/help-center","purpose":"installation","checked":"2026-10-25","creator":"iKamper Tech"}],"reviews":[{"id":"5807ff59-5ca6-54fe-bb25-95d03decb334","productIds":["acc-ikamper-trio"],"author":"Laura S.","date":"2026-09-07","source":"https://ikamper.com/products/skycamp-4-0-trio?variant=45015993352276","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Vehicle and mattress variant not stated","summary":"Reports quick setup and good performance during a windy Wyoming trip. Wind speed was not independently measured.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"30e21dec-c38e-431b-a85f-fa1a4520f8d0","productIds":["acc-ikamper-trio"],"author":"I.","date":"2026-07-13","source":"https://ikamper.com/products/skycamp-4-0-trio?variant=45015993352276","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Trio model; optional mattress differs from base configuration","context":"Vehicle not stated; air mattress variant","summary":"Reports mattress-packing difficulty and slow support, then updates that the service lead apologized and offered help and a new attachment.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"56156fb5-7b8d-4460-bdff-1196aa060134","productIds":["acc-ikamper-trio"],"author":"Michael W.","date":null,"source":"https://ikamper.com/products/skycamp-4-0-trio?variant=45015993352276","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Trio model; optional LT Air mattress, different vehicle","context":"Tundra with 5 ft 6 in bed; low rack","summary":"Likes the larger openings and mattress comfort; reports packing bedding inside when the mattress is deflated.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"},{"id":"trio-field","productIds":["acc-ikamper-trio"],"author":"Meghan LaHatte","date":"2026-07-29","source":"https://gearjunkie.com/motors/ikamper-skycamp-4-0-trio-review","sourceName":"GearJunkie hands-on editorial review","kind":"editorial","scope":"Exact tent model; different vehicle and mounting system","context":"2015 Tacoma on Yakima crossbars","summary":"After two months, praises quick setup and sleeping comfort; flags price, closure reach for shorter users and a ladder that must remain deployed.","sourceVerified":false,"verification":"Hands-on author; outlet discloses affiliate links, purchase not verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-ikamper-awning","slug":"ikamper-exoshell-270-driver-side","path":"/products/ikamper-exoshell-270-driver-side","name":"iKamper ExoShell 270 · driver side","brand":"iKamper","brandPath":"/brands/ikamper","category":"roof","categorySlug":"roof-and-camping","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-ikamper-awning","cat":"roof","subcat":"Awnings","name":"iKamper ExoShell 270 · driver side","slot":"awning","modelId":"awning","brand":"IKAMPER","sku":"MB011-005","variant":"Driver Side","source":"https://ikamper.com/products/exoshell-270-awning?variant=39668827652180","price":1950,"image":"acc-ikamper-awning","gross":null,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Driver-side 270-degree awning; separate from the tent.","specs":"MB011-005; driver-side variant.","explain":"Confirm compatible brackets, rack sidewall strength, hatch clearance and manufacturer deployment/wind instructions.","realAccessory":true,"icon":"▰","visual":"awning","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Documented compatible rack","slots":["rack"],"note":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof","ids":[]}],"checks":[{"label":"Awning brackets and deployment","status":"check","detail":"Verify specific brackets and load limits. Do not assume a rack includes compatible awning mounts.","page":"roof"}],"available":true,"offers":[{"seller":"iKamper","price":1950,"url":"https://ikamper.com/products/exoshell-270-awning?variant=39668827652180"}],"imageSource":"https://cdn.shopify.com/s/files/1/2254/0887/files/exoshell-270-awning-2320664.jpg?v=1777338560","label":"Driver Side","choice":null,"url":"/products/ikamper-exoshell-270-driver-side","priceAmount":1950,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[1,2],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Documented compatible rack","status":"check","detail":"Verify crossbar/rail geometry, mounting brackets and total roof load. A selected rack is not an automatic fit confirmation.","page":"roof"},{"label":"Awning brackets and deployment","status":"check","detail":"Verify specific brackets and load limits. Do not assume a rack includes compatible awning mounts.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm compatible brackets, rack sidewall strength, hatch clearance and manufacturer deployment/wind instructions."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"exoshell-manual","productIds":["acc-ikamper-awning"],"type":"manual","title":"ExoShell 270 user and mounting manual","url":"https://cdn.shopify.com/s/files/1/2254/0887/files/EXOSHELL_270_Manual_e98f0b96-fb84-4c78-910f-95b3bc9cb001.pdf?v=1749051012","publisher":"iKamper","scope":"ExoShell 270 · left / right versions","note":"Select the left-version procedure for the catalog driver-side unit; rack attachment hardware and clearances depend on your setup.","match":"exact","official":true,"source":"https://cdn.shopify.com/s/files/1/2254/0887/files/EXOSHELL_270_Manual_e98f0b96-fb84-4c78-910f-95b3bc9cb001.pdf?v=1749051012","purpose":"installation and setup","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"cce21735-a1a2-4b7f-8a5c-f575f9d9ab48","productIds":["acc-ikamper-awning"],"author":"Chris H.","date":null,"source":"https://ikamper.com/products/exoshell-270-awning?variant=39668827652180","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"ExoShell 270 family; driver/passenger side unconfirmed","context":"Vehicle and mounting side not stated","summary":"Likes the overall construction but reports one canopy section sagging.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"df9842f5-16e3-4836-83e9-dbe72edbd721","productIds":["acc-ikamper-awning"],"author":"JULIA","date":null,"source":"https://ikamper.com/products/exoshell-270-awning?variant=39668827652180","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"ExoShell 270 family; driver/passenger side unconfirmed","context":"Vehicle and mounting side not stated","summary":"Praises installation, material quality and everyday functionality.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-dv8-steps","slug":"dv8-oe-plus-side-steps","path":"/products/dv8-oe-plus-side-steps","name":"DV8 OE Plus side steps","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"steps","categorySlug":"steps-and-rock-sliders","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-steps","cat":"steps","subcat":"Steps","name":"DV8 OE Plus side steps","slot":"side","modelId":"steps","brand":"DV8 OFFROAD","sku":"SRTL4-01","variant":"Default Title","source":"https://dv8offroad.com/products/250-land-cruiser-side-steps?variant=41387157618759","price":749.99,"image":"acc-dv8-steps","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":1.5,"desc":"LC250 entry steps with a bolt-on installation.","specs":"SRTL4-01; steel construction; pair.","explain":"Entry steps should not be treated as frame-mounted rock sliders or approved vehicle lifting points.","realAccessory":true,"icon":"▰","visual":"steps","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Mounting and intended use","status":"check","detail":"Confirm factory attachment and other underbody protection clearance. No rock-jacking capability is assumed.","page":"steps"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":749.99,"url":"https://dv8offroad.com/products/250-land-cruiser-side-steps?variant=41387157618759"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/2024-Toyota-Land-Cruiser-OE-Plus-Side-Steps-1.jpg?v=1751295210","manufacturerHours":true,"laborSource":"https://dv8offroad.com/cdn/shop/files/SRTL4-01_Installation_Guide_Final.pdf?v=16306767392107711959","manualUrl":"https://dv8offroad.com/cdn/shop/files/SRTL4-01_Installation_Guide_Final.pdf?v=16306767392107711959","label":"Default Title","choice":null,"url":"/products/dv8-oe-plus-side-steps","priceAmount":749.99,"priceBasis":"selected pair / package","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1.5,1.5],"installBasis":"factory-step removal as needed, mounting brackets, fastening and clearance checks.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Mounting and intended use","status":"check","detail":"Confirm factory attachment and other underbody protection clearance. No rock-jacking capability is assumed.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Entry steps should not be treated as frame-mounted rock sliders or approved vehicle lifting points."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-SRTL4-01","productIds":["acc-dv8-steps"],"type":"manual","title":"SRTL4-01 installation manual","url":"https://dv8offroad.com/cdn/shop/files/SRTL4-01_Installation_Guide_Final.pdf?v=16306767392107711959","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / SRTL4-01","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/SRTL4-01_Installation_Guide_Final.pdf?v=16306767392107711959","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"9a428e4c-b9f1-4db7-bf9b-19bed6d8fd72","productIds":["acc-dv8-steps"],"author":"Gerald Urban","date":"2026-05-18","source":"https://dv8offroad.com/products/250-land-cruiser-side-steps?variant=41387157618759","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"2025 Land Cruiser","summary":"Reports straightforward replacement of the factory steps; winter durability was not yet tested.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"4283e36b-3ca4-42fb-9c37-c967c310876a","productIds":["acc-dv8-steps"],"author":"Jim Lessman","date":"2026-03-21","source":"https://dv8offroad.com/products/250-land-cruiser-side-steps?variant=41387157618759","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Land Cruiser 1958","summary":"Reports good fit and easier entry and roof-rack access.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-backwoods-sliders","slug":"backwoods-lc250-rock-sliders","path":"/products/backwoods-lc250-rock-sliders","name":"Backwoods LC250 rock sliders","brand":"BACKWOODS ADVENTURE MODS","brandPath":"/brands/backwoods-adventure-mods","category":"steps","categorySlug":"steps-and-rock-sliders","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-backwoods-sliders","cat":"steps","subcat":"Rock sliders","name":"Backwoods LC250 rock sliders","slot":"side","modelId":"sliders","brand":"BACKWOODS ADVENTURE MODS","sku":"BWTC5S-9930","variant":"Default Title","source":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-rock-sliders?variant=41914054213655","price":1150,"image":"acc-backwoods-sliders","gross":null,"weight":null,"weightVerified":false,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with bolt-on mounting.","specs":"BWTC5S-9930; 1.75-inch DOM steel tubing; grade-8 mounting hardware.","explain":"Confirm vehicle variant, slider mounting torque, underbody clearance and manufacturer-approved jacking use.","realAccessory":true,"icon":"▰","visual":"sliders","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Frame and skid clearance","status":"check","detail":"Verify exact mounts, fuel/brake-line clearance and the combination with underbody protection.","page":"steps"}],"available":true,"offers":[{"seller":"Backwoods Adventure Mods","price":1150,"url":"https://backwoodsadventuremods.com/products/toyota-land-cruiser-250-series-2024-rock-sliders?variant=41914054213655"}],"imageSource":"https://cdn.shopify.com/s/files/1/2236/0699/files/land-cruiser-250-lc250-rock-sliders.webp?v=1769724315","label":"Default Title","choice":null,"url":"/products/backwoods-lc250-rock-sliders","priceAmount":1150,"priceBasis":"selected pair / package","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[2,4],"installBasis":"factory-step removal as needed, mounting brackets, fastening and clearance checks.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Frame and skid clearance","status":"check","detail":"Verify exact mounts, fuel/brake-line clearance and the combination with underbody protection.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm vehicle variant, slider mounting torque, underbody clearance and manufacturer-approved jacking use."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"bw-sliders","productIds":["acc-backwoods-sliders"],"type":"video","title":"LC250 rock slider installation","url":"https://www.youtube.com/watch?v=G4kIlwuGDWU","publisher":"Backwoods Adventure Mods","scope":"Official · LC250 sliders","note":"Manufacturer installation library identifies the LC250 sliders. Confirm vehicle trim and supplied fasteners.","match":"exact","official":true,"source":"https://backwoodsadventuremods.com/pages/installation-instructions","purpose":"installation","checked":"2026-10-25","creator":"Backwoods Adventure Mods"}],"reviews":[],"clearance":null}]},{"id":"acc-dv8-frontskid","slug":"dv8-front-skid-plate","path":"/products/dv8-front-skid-plate","name":"DV8 front skid plate","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"body","categorySlug":"exterior-and-protection","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-frontskid","cat":"body","subcat":"Skid plates","name":"DV8 front skid plate","slot":"front-skid","modelId":"skid","brand":"DV8 OFFROAD","sku":"SPTL4-02","variant":"Default Title","source":"https://dv8offroad.com/products/land-cruiser-250-series-front-skid-plate?variant=41573806538823","price":199.99,"image":"acc-dv8-frontskid","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":1.5,"desc":"Front underbody protection for the listed LC250 application.","specs":"SPTL4-02; four mounting points.","explain":"Confirm factory parts removed, oil-filter access and the intended bumper/skid combination.","realAccessory":true,"icon":"▰","visual":"skid","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Exact installation and load limits","status":"check","detail":"Confirm factory parts removed, oil-filter access and the intended bumper/skid combination.","page":"body"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":199.99,"url":"https://dv8offroad.com/products/land-cruiser-250-series-front-skid-plate?variant=41573806538823"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/2024_Toyota-Land-Cruiser-Front-Skid-Plate-1.jpg?v=1751295143","manufacturerHours":true,"laborSource":"https://dv8offroad.com/cdn/shop/files/SPTL4-02_Installation_Guide_Final.pdf?v=5482801384705422672","manualUrl":"https://dv8offroad.com/cdn/shop/files/SPTL4-02_Installation_Guide_Final.pdf?v=5482801384705422672","label":"Default Title","choice":null,"url":"/products/dv8-front-skid-plate","priceAmount":199.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1.5,1.5],"installBasis":"access, mounting or minor drilling where specified, underbody or body clearance checks and final tightening.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Exact installation and load limits","status":"check","detail":"Confirm factory parts removed, oil-filter access and the intended bumper/skid combination.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm factory parts removed, oil-filter access and the intended bumper/skid combination."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-SPTL4-02","productIds":["acc-dv8-frontskid"],"type":"manual","title":"SPTL4-02 installation manual","url":"https://dv8offroad.com/cdn/shop/files/SPTL4-02_Installation_Guide_Final.pdf?v=5482801384705422672","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / SPTL4-02","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/SPTL4-02_Installation_Guide_Final.pdf?v=5482801384705422672","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"3bf52513-0ffd-4316-8d73-772c6395f789","productIds":["acc-dv8-frontskid"],"author":"Jim Lessman","date":"2026-09-20","source":"https://dv8offroad.com/products/land-cruiser-250-series-front-skid-plate?variant=41573806538823","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Land Cruiser 1958 with DV8 brush bar and belly plate","summary":"Reports that the front and belly plates overlap and fit together well.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"10297e83-7a9d-4340-8873-27a8a96ac19e","productIds":["acc-dv8-frontskid"],"author":"Eric K.","date":"2025-04-20","source":"https://dv8offroad.com/products/land-cruiser-250-series-front-skid-plate?variant=41573806538823","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Centric bumper plus front/rear skid combination","summary":"Likes the fit with the rear plate, but notes a radiator-support gap with the Centric bumper.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-dv8-rearskid","slug":"dv8-rear-belly-skid-plate","path":"/products/dv8-rear-belly-skid-plate","name":"DV8 rear belly skid plate","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"body","categorySlug":"exterior-and-protection","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-rearskid","cat":"body","subcat":"Skid plates","name":"DV8 rear belly skid plate","slot":"rear-skid","modelId":"skid","brand":"DV8 OFFROAD","sku":"SPTT1-09","variant":"Default Title","source":"https://dv8offroad.com/products/tacoma-land-cruiser-rear-skid-plate?variant=41368391483463","price":209.99,"image":"acc-dv8-rearskid","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":1.5,"desc":"Rear belly protection compatible with listed DV8 and factory front skids.","specs":"SPTT1-09; bolt-on factory mounting locations.","explain":"Verify exact vehicle application, protected systems, service access and other skid interfaces.","realAccessory":true,"icon":"▰","visual":"skid","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Exact installation and load limits","status":"check","detail":"Verify exact vehicle application, protected systems, service access and other skid interfaces.","page":"body"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":209.99,"url":"https://dv8offroad.com/products/tacoma-land-cruiser-rear-skid-plate?variant=41368391483463"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/2024-Toyota-Tacoma-_-Land-Cruiser-Rear-Belly-Skid-Plate-2.jpg?v=1751295220","manufacturerHours":true,"laborSource":"https://dv8offroad.com/cdn/shop/files/SPTT1-09_Installation_Guide_Final.pdf?v=16063564953764990901","manualUrl":"https://dv8offroad.com/cdn/shop/files/SPTT1-09_Installation_Guide_Final.pdf?v=16063564953764990901","label":"Default Title","choice":null,"url":"/products/dv8-rear-belly-skid-plate","priceAmount":209.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1.5,1.5],"installBasis":"access, mounting or minor drilling where specified, underbody or body clearance checks and final tightening.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Exact installation and load limits","status":"check","detail":"Verify exact vehicle application, protected systems, service access and other skid interfaces.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"Verify exact vehicle application, protected systems, service access and other skid interfaces."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-SPTT1-09","productIds":["acc-dv8-rearskid"],"type":"manual","title":"SPTT1-09 installation manual","url":"https://dv8offroad.com/cdn/shop/files/SPTT1-09_Installation_Guide_Final.pdf?v=16063564953764990901","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / SPTT1-09","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/SPTT1-09_Installation_Guide_Final.pdf?v=16063564953764990901","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"cd405297-c4a8-4045-8d1c-bc34ddc7e25f","productIds":["acc-dv8-rearskid"],"author":"Michael M","date":"2026-07-17","source":"https://dv8offroad.com/products/tacoma-land-cruiser-rear-skid-plate?variant=41368391483463","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Shared skid model; LC250 application not established","context":"Vehicle not stated on shared application page","summary":"Reports good mounting-hole alignment but soft Allen-head mounting hardware.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"5c07dc8c-19e0-4176-9ae5-fdcb6f481802","productIds":["acc-dv8-rearskid"],"author":"Larry C","date":"2025-01-23","source":"https://dv8offroad.com/products/tacoma-land-cruiser-rear-skid-plate?variant=41368391483463","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Same shared skid listing; different vehicle","context":"2024 Tacoma TRD Off Road","summary":"Reports accurate instructions and good fit; recommends assistance when positioning the plate.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-dv8-molle","slug":"dv8-interior-rear-window-molle-panels","path":"/products/dv8-interior-rear-window-molle-panels","name":"DV8 interior rear-window MOLLE panels","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"cargo","categorySlug":"interior-and-cargo","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-molle","cat":"cargo","subcat":"Interior storage","name":"DV8 interior rear-window MOLLE panels","slot":"molle","modelId":"gear","brand":"DV8 OFFROAD","sku":"MPT4-01","variant":"Default Title","source":"https://dv8offroad.com/products/250-series-land-cruiser-rear-window-molle-panels?variant=41323185176647","price":279.99,"image":"acc-dv8-molle","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":1.5,"desc":"LC250 rear cargo-window pocket panels for interior gear organization.","specs":"MPT4-01; M6 mounting slots; drilling required.","explain":"LC250 only, not GX550. Follow the drilling/mounting instructions and confirm trim, visibility and attached-gear load limits.","realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Interior mounting and attached equipment","status":"check","detail":"LC250 only, not GX550. Follow the drilling/mounting instructions and confirm trim, visibility and attached-gear load limits.","page":"cargo"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":279.99,"url":"https://dv8offroad.com/products/250-series-land-cruiser-rear-window-molle-panels?variant=41323185176647"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/Land-Cruiser-250-Series-Window-Pocket-Molle-Panels-1.jpg?v=1751295252","manufacturerHours":true,"laborSource":"https://dv8offroad.com/cdn/shop/files/Installation_Guide_MPTL4-01_Final.pdf?v=11073146922799341139","manualUrl":"https://dv8offroad.com/cdn/shop/files/Installation_Guide_MPTL4-01_Final.pdf?v=11073146922799341139","label":"Default Title","choice":null,"url":"/products/dv8-interior-rear-window-molle-panels","priceAmount":279.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1.5,1.5],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Interior mounting and attached equipment","status":"check","detail":"LC250 only, not GX550. Follow the drilling/mounting instructions and confirm trim, visibility and attached-gear load limits.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"LC250 only, not GX550. Follow the drilling/mounting instructions and confirm trim, visibility and attached-gear load limits."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-MPT4-01","productIds":["acc-dv8-molle"],"type":"manual","title":"MPT4-01 installation manual","url":"https://dv8offroad.com/cdn/shop/files/Installation_Guide_MPTL4-01_Final.pdf?v=11073146922799341139","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / MPT4-01","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/Installation_Guide_MPTL4-01_Final.pdf?v=11073146922799341139","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"763e1013-b9c1-4dfa-946f-42a49be7f14f","productIds":["acc-dv8-molle"],"author":"Terry Rascoe","date":"2025-02-21","source":"https://dv8offroad.com/products/250-series-land-cruiser-rear-window-molle-panels?variant=41323185176647","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Land Cruiser 250","summary":"Reports simple installation using factory attachment points and better cargo organization.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"30cb94b0-2263-4453-bfd2-50e748ed5882","productIds":["acc-dv8-molle"],"author":"Joshua Valentine","date":"2025-03-10","source":"https://dv8offroad.com/products/250-series-land-cruiser-rear-window-molle-panels?variant=41323185176647","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"Vehicle not stated","summary":"Praises finish and packaging, while noting tension at the lower brace/standoff joint.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"rok-lc250","slug":"rokblokz-lc250-mud-flaps","path":"/products/rokblokz-lc250-mud-flaps","name":"RokBlokz LC250 mud flaps","brand":"ROKBLOKZ","brandPath":"/brands/rokblokz","category":"body","categorySlug":"exterior-and-protection","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-rok-flaps","cat":"body","subcat":"Mud flaps","name":"RokBlokz LC250 mud flaps · Original","brand":"ROKBLOKZ","sku":"T481 24 LandCruiser BLK/BLK OG","price":169.99,"source":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210869317675","variant":"Original / Black / Black","slot":"flaps","modelId":"flaps","desc":"Flexible mud-flap protection in original or wider/longer XL sizing.","specs":"Four flaps · black / black · Original or XL selected below.","includes":"Four flaps, brackets and mounting hardware.","explain":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","hmin":1,"hmax":2,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"flaps","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","page":"body"}],"offers":[{"seller":"ROKBLOKZ","price":169.99,"url":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210869317675"}],"recommendation":"Choose Original for near-stock coverage or XL for additional coverage; review tire clearance and grade-specific mounting first.","image":"acc-rok-flaps","imageSource":"https://cdn.shopify.com/s/files/1/2568/1730/files/2024_Toyota_Land_Cruiser_J250_Featuring_Rokblokz_Rally_Mud_Flaps_7.jpg?v=1734721842","label":"Original · set of four","choice":null,"url":"/products/rokblokz-lc250-mud-flaps?variant=acc-rok-flaps","priceAmount":169.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[1,2],"installBasis":"access, mounting or minor drilling where specified, underbody or body clearance checks and final tightening.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Four flaps, brackets and mounting hardware."},{"label":"Exact fitment and supporting work","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"rok-install","productIds":["acc-rok-flaps"],"type":"video","title":"2024+ LC250 RokBlokz mud flap installation","url":"https://www.youtube.com/watch?v=vz5spIlW6pE","publisher":"Rokblokz","scope":"Official · LC250 mud flaps","note":"Linked from the LC250 product page; confirm Original versus XL hardware and your tire clearance.","match":"family","official":true,"source":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps","purpose":"installation","checked":"2026-10-25","creator":"Rokblokz"}],"reviews":[{"id":"72a9e5d6-e170-44c8-b731-a466fc1b70a5","productIds":["acc-rok-flaps"],"author":"Marc H.","date":"2026-08-13","source":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210869317675","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"LC250 flap model; Original/XL and color unconfirmed","context":"Oversized tires; exact size not stated","summary":"Likes the fit and support, but needed modifications for larger tires and missing vehicle brackets.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"68e6cb62-2d08-4941-9a0c-3db3d4612182","productIds":["acc-rok-flaps"],"author":"JASON L.","date":"2025-02-07","source":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210869317675","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"LC250 flap family; wide variant may differ from catalog Original","context":"Land Cruiser; wide flap variant mentioned","summary":"Reports easy installation but wishes the outer/top coverage were wider.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"acc-rok-xl","cat":"body","subcat":"Mud flaps","name":"RokBlokz LC250 mud flaps · XL","brand":"ROKBLOKZ","sku":"T481 24 LandCruiser BLK//BLK XL","price":179.99,"source":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210870202411","variant":"XL / Black / Black","slot":"flaps","modelId":"flaps","desc":"Flexible mud-flap protection in original or wider/longer XL sizing.","specs":"Four flaps · black / black · Original or XL selected below.","includes":"Four flaps, brackets and mounting hardware.","explain":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","hmin":1,"hmax":2,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"flaps","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","page":"body"}],"offers":[{"seller":"ROKBLOKZ","price":179.99,"url":"https://rokblokz.com/products/toyota-land-cruiser-2024-mud-flaps?variant=41210870202411"}],"recommendation":"Choose Original for near-stock coverage or XL for additional coverage; review tire clearance and grade-specific mounting first.","image":"acc-rok-flaps","label":"XL · set of four","choice":null,"url":"/products/rokblokz-lc250-mud-flaps?variant=acc-rok-xl","priceAmount":179.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[1,2],"installBasis":"access, mounting or minor drilling where specified, underbody or body clearance checks and final tightening.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Four flaps, brackets and mounting hardware."},{"label":"Exact fitment and supporting work","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"1958 trim needs modification at the upper rear mounting hole; manufacturer says this may extend to all 2025 models. Modified tires/bodywork can require further changes."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-ssw-drawers","slug":"solid-wood-worx-lc250-dual-drawers-basic","path":"/products/solid-wood-worx-lc250-dual-drawers-basic","name":"Solid Wood Worx LC250 dual drawers · Basic","brand":"SOLID WOOD WORX","brandPath":"/brands/solid-wood-worx","category":"cargo","categorySlug":"interior-and-cargo","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-ssw-drawers","cat":"cargo","subcat":"Drawers","name":"Solid Wood Worx LC250 dual drawers · Basic","slot":"drawers","modelId":"drawers","brand":"SOLID WOOD WORX","sku":"SYS-LC250-BAS-SHP","variant":"Basic / Standard Shipping (Free)","source":"https://solidwoodworx.com/products/land-cruiser-250-dual-drawer-storage-system-bed-platform-toyota-2024?variant=44134405603524","price":1695,"image":"acc-ssw-drawers","gross":null,"weight":null,"weightVerified":false,"hmin":3,"hmax":5,"desc":"Basic flat-pack drawer configuration with standard shipping; bed platform not included.","specs":"SYS-LC250-BAS-SHP; dual drawer box and four dividers.","explain":"Price is the Basic / Standard Shipping variant, not the shop-installed or pre-built options. Confirm anchors, rear access, seating and added load.","realAccessory":true,"icon":"▰","visual":"drawers","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Cargo fit and anchoring","status":"check","detail":"Verify US hybrid cargo geometry, factory anchor use, battery/service access and fridge/slide stacking.","page":"cargo"}],"available":true,"offers":[{"seller":"Solid Wood Worx","price":1695,"url":"https://solidwoodworx.com/products/land-cruiser-250-dual-drawer-storage-system-bed-platform-toyota-2024?variant=44134405603524"}],"imageSource":"https://cdn.shopify.com/s/files/1/0244/6347/4743/files/15.png?v=1778702260","label":"Basic / Standard Shipping (Free)","choice":null,"url":"/products/solid-wood-worx-lc250-dual-drawers-basic","priceAmount":1695,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[3,5],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Cargo fit and anchoring","status":"check","detail":"Verify US hybrid cargo geometry, factory anchor use, battery/service access and fridge/slide stacking.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Price is the Basic / Standard Shipping variant, not the shop-installed or pre-built options. Confirm anchors, rear access, seating and added load."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"ssw-build","productIds":["acc-ssw-drawers"],"type":"video","title":"How to build your LC250 drawer system","url":"https://www.youtube.com/watch?v=R9tvJx-w4Oo","publisher":"Solid Wood Worx","scope":"Official · LC250 drawer assembly","note":"Manufacturer product page labels this a Build Video. Assembly of the system; Basic/bed extension configuration and vehicle restraint installation need separate confirmation.","match":"family","official":true,"source":"https://solidwoodworx.com/products/land-cruiser-250-dual-drawer-storage-system-bed-platform-toyota-2024","purpose":"assembly","checked":"2026-10-25","creator":"Solid Wood Worx"}],"reviews":[{"id":"ssw-mike","productIds":["acc-ssw-drawers"],"author":"Mike","date":"2025-08-18","source":"https://www.landcruiserforum.com/threads/solid-wood-worx.6751/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 drawer family; bed extension is outside Basic kit","context":"LC250 drawer/bed system installed since January","summary":"Reports months of useful camping storage; would prefer a split rather than full bed extension.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"ssw-joe","productIds":["acc-ssw-drawers"],"author":"JoeDirt","date":"2025-08-18","source":"https://www.landcruiserforum.com/threads/solid-wood-worx.6751/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 drawer family; flat-pack/installed and extension variant unconfirmed","context":"2024 LC First Edition","summary":"Reports a year of daily use with materials and slides holding up well.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-iceco-apl35","slug":"iceco-apl35-silver","path":"/products/iceco-apl35-silver","name":"ICECO APL35 · silver","brand":"ICECO","brandPath":"/brands/iceco","category":"cargo","categorySlug":"interior-and-cargo","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-iceco-apl35","mountArea":"rear","cat":"cargo","subcat":"Fridges","name":"ICECO APL35 · silver","slot":"fridge","modelId":"fridge","brand":"WWW.ICECOFREEZER.COM","sku":"APL35","variant":"APL35","source":"https://icecofreezer.com/products/apl35-aluminum-freezer?variant=46559595004071","price":759,"image":"acc-iceco-apl35","gross":32,"weight":32,"weightVerified":true,"hmin":0.5,"hmax":1,"desc":"35-liter dual-zone aluminum fridge/freezer.","specs":"32 lb empty; two independent temperature zones; SECOP compressor.","explain":"Weight excludes food, liquids, slide and vehicle tie-down hardware. Verify energy needs from actual conditions, not storage capacity alone.","realAccessory":true,"icon":"▰","visual":"fridge","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Secure cargo mounting","slots":["drawers","slide"],"note":"Provide rated tie-downs or a verified compatible slide and safe cable routing.","page":"cargo","ids":[]}],"checks":[{"label":"Power and ventilation","status":"check","detail":"Use an appropriately protected DC outlet and secure connector. Confirm startup draw, cable routing and ventilation.","page":"power"}],"available":true,"offers":[{"seller":"www.icecofreezer.com","price":759,"url":"https://icecofreezer.com/products/apl35-aluminum-freezer?variant=46559595004071"}],"imageSource":"https://cdn.shopify.com/s/files/1/0053/1536/2906/files/a690c13c-b018-4994-8f97-92b5615296f3_backup_e1be8589_613d4fe4_b4d214f2_1e9708b6_8b7335e9_4ca93a65.jpg?v=1791788520","label":"APL35","choice":null,"url":"/products/iceco-apl35-silver","priceAmount":759,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[0.5,1],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Secure cargo mounting","status":"check","detail":"Provide rated tie-downs or a verified compatible slide and safe cable routing.","page":"cargo"},{"label":"Power and ventilation","status":"check","detail":"Use an appropriately protected DC outlet and secure connector. Confirm startup draw, cable routing and ventilation.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Weight excludes food, liquids, slide and vehicle tie-down hardware. Verify energy needs from actual conditions, not storage capacity alone."}],"documents":[{"id":"apl35-manual","productIds":["acc-iceco-apl35"],"type":"manual","title":"APL35 V4.0 user manual","url":"https://cdn.shopify.com/s/files/1/0053/1536/2906/files/ICECO_APL35_Manual4.0.pdf?v=1736746954","publisher":"ICECO","scope":"APL35 model · operation and power","note":"Covers power supply and operation. It is not a vehicle mounting, restraint or drawer installation guide.","match":"exact","official":true,"source":"https://cdn.shopify.com/s/files/1/0053/1536/2906/files/ICECO_APL35_Manual4.0.pdf?v=1736746954","purpose":"setup","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"c562ce35-12f5-4e77-8b9e-151ab2c671f9","productIds":["acc-iceco-apl35"],"author":"Lauren","date":"2026-06-10","source":"https://icecofreezer.com/products/apl35-aluminum-freezer?variant=46559595004071","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"APL35 model; silver product page","context":"Tacoma; ICECO magnetic battery","summary":"Reports successful truck-bed use while driving and camping with a separate battery.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"65f8822b-a903-4e97-b244-4e661efa12a6","productIds":["acc-iceco-apl35"],"author":"Franklin Holder","date":"2026-06-09","source":"https://icecofreezer.com/products/apl35-aluminum-freezer?variant=46559595004071","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"APL35 model; silver product page","context":"Vehicle not stated; cause not established","summary":"Reports immediate E3 errors and returning the unit; says return shipping and refund were provided.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"66303ed9-6ffe-478b-9bc8-d5c4c71be22b","productIds":["acc-iceco-apl35"],"author":"Leonard","date":"2026-04-21","source":"https://icecofreezer.com/products/apl35-aluminum-freezer?variant=46559595004071","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"APL35 model; silver product page","context":"Truck bed/back seat use","summary":"Likes quiet operation and app access; says support resolved a small plug issue.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-ssw-slide","slug":"tortuga-offroad-solid-wood-worx-tortuga-fridge-slide-small","path":"/products/tortuga-offroad-solid-wood-worx-tortuga-fridge-slide-small","name":"Solid Wood Worx Tortuga fridge slide · Small","brand":"TORTUGA OFFROAD","brandPath":"/brands/tortuga-offroad","category":"cargo","categorySlug":"interior-and-cargo","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-ssw-slide","cat":"cargo","subcat":"Fridge slides","name":"Solid Wood Worx Tortuga fridge slide · Small","slot":"slide","modelId":"slide","brand":"TORTUGA OFFROAD","sku":"Variant 41857543831748","variant":"Small 16\" x 28\"","source":"https://solidwoodworx.com/products/xl-aluminum-fridge-slide-with-cutting-board-20-x-32-5?variant=41857543831748","price":499,"image":"acc-ssw-slide","gross":null,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Small slide with cutting board; a fridge is not included.","specs":"Small 16 × 28 in variant; selected variant ID identifies the item.","explain":"Check the exact fridge base and loaded mass; fit to the ICECO APL35 is not verified. Secure into suitable load-bearing anchors.","realAccessory":true,"icon":"▰","visual":"slide","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Dimensionally compatible fridge","slots":["fridge"],"note":"Confirm slide tray dimensions, loaded fridge weight and latch/door clearance.","page":"cargo","ids":[]}],"checks":[],"available":true,"offers":[{"seller":"Tortuga OffRoad","price":499,"url":"https://solidwoodworx.com/products/xl-aluminum-fridge-slide-with-cutting-board-20-x-32-5?variant=41857543831748"}],"imageSource":"https://cdn.shopify.com/s/files/1/0244/6347/4743/products/FridgeSlideLg.jpg?v=1778700016","label":"Small 16\" x 28\"","choice":null,"url":"/products/tortuga-offroad-solid-wood-worx-tortuga-fridge-slide-small","priceAmount":499,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1,2],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Dimensionally compatible fridge","status":"check","detail":"Confirm slide tray dimensions, loaded fridge weight and latch/door clearance.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Check the exact fridge base and loaded mass; fit to the ICECO APL35 is not verified. Secure into suitable load-bearing anchors."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-dv8-console","slug":"dv8-center-console-molle-panels","path":"/products/dv8-center-console-molle-panels","name":"DV8 center-console MOLLE panels","brand":"DV8 OFFROAD","brandPath":"/brands/dv8-offroad","category":"cargo","categorySlug":"interior-and-cargo","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-dv8-console","cat":"cargo","subcat":"Interior storage","name":"DV8 center-console MOLLE panels","slot":"console","modelId":"gear","brand":"DV8 OFFROAD","sku":"CCT4-01","variant":"Default Title","source":"https://dv8offroad.com/products/250-series-land-cruiser-center-console-molle-panels?variant=41323161518151","price":179.99,"image":"acc-dv8-console","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":1.5,"desc":"LC250 console organization panels for compatible device and gear mounts.","specs":"CCT4-01; drill-and-nutsert mounting; pair of console panels.","explain":"Confirm airbag, seat, console and control clearances. Device holders and accessories are separate. Product page and installation manual differ on fastener thread labels; confirm the supplied hardware revision.","realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Device mounts and cabin clearance","status":"check","detail":"Select compatible holders and keep controls, occupant movement and safety systems unobstructed.","page":"cargo"}],"available":true,"offers":[{"seller":"DV8 Offroad","price":179.99,"url":"https://dv8offroad.com/products/250-series-land-cruiser-center-console-molle-panels?variant=41323161518151"}],"imageSource":"https://cdn.shopify.com/s/files/1/1118/3812/files/250-Series-Toyota-Land-Cruiser-Center-Console-Molle-Panels-1.jpg?v=1751295255","manufacturerHours":true,"laborSource":"https://dv8offroad.com/cdn/shop/files/CCT4-01_Installation_Guide_Final.pdf?v=18362206359591769054","manualUrl":"https://dv8offroad.com/cdn/shop/files/CCT4-01_Installation_Guide_Final.pdf?v=18362206359591769054","label":"Default Title","choice":null,"url":"/products/dv8-center-console-molle-panels","priceAmount":179.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[1.5,1.5],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Device mounts and cabin clearance","status":"check","detail":"Select compatible holders and keep controls, occupant movement and safety systems unobstructed.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm airbag, seat, console and control clearances. Device holders and accessories are separate. Product page and installation manual differ on fastener thread labels; confirm the supplied hardware revision."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-CCT4-01","productIds":["acc-dv8-console"],"type":"manual","title":"CCT4-01 installation manual","url":"https://dv8offroad.com/cdn/shop/files/CCT4-01_Installation_Guide_Final.pdf?v=18362206359591769054","publisher":"DV8 Offroad","scope":"Exact LC250 accessory / CCT4-01","note":"Manufacturer PDF identifies this accessory and LC250 application. Check the supplied revision before installation.","match":"exact","official":true,"source":"https://dv8offroad.com/cdn/shop/files/CCT4-01_Installation_Guide_Final.pdf?v=18362206359591769054","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"7337df3b-75d4-43a1-82d3-99d7f54476ac","productIds":["acc-dv8-console"],"author":"Marc Torrence","date":"2025-08-14","source":"https://dv8offroad.com/products/250-series-land-cruiser-center-console-molle-panels?variant=41323161518151","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"2025 Land Cruiser","summary":"Reports easy installation and satisfaction with the panels.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-jackery1500","slug":"jackery-explorer-1500-ultra","path":"/products/jackery-explorer-1500-ultra","name":"Jackery Explorer 1500 Ultra","brand":"JACKERY","brandPath":"/brands/jackery","category":"power","categorySlug":"power-and-electrical","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-jackery1500","cat":"power","subcat":"Power stations","name":"Jackery Explorer 1500 Ultra","slot":"station","modelId":"station","brand":"JACKERY","sku":"21-0001-000301","variant":"Explorer 1500 Ultra Portable Power Station","source":"https://www.jackery.com/products/jackery-explorer-1500-ultra-portable-power-station?variant=42447145435223","price":1079,"image":"acc-jackery1500","gross":38.6,"weight":38.6,"weightVerified":true,"hmin":0.5,"hmax":1,"desc":"Portable LiFePO4 storage; standalone power-station variant.","specs":"1536 Wh; 1800 W rated AC; about 38.6 lb; model JE-1500C.","explain":"Secure the unit and provide ventilation, appropriate DC connections and an energy budget. Charger and solar panels are separate.","realAccessory":true,"icon":"▰","visual":"station","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[],"checks":[{"label":"Mount, outlets and energy budget","status":"check","detail":"Confirm securement and the actual fridge/device consumption. Storage capacity does not establish output or runtime.","page":"power"}],"available":true,"offers":[{"seller":"Jackery","price":1079,"url":"https://www.jackery.com/products/jackery-explorer-1500-ultra-portable-power-station?variant=42447145435223"}],"imageSource":"https://cdn.shopify.com/s/files/1/0970/9262/files/jackery-portable-power-station-explorer-1500-ultra-2335969.webp?v=1787333288","label":"Explorer 1500 Ultra Portable Power Station","choice":null,"url":"/products/jackery-explorer-1500-ultra","priceAmount":1079,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[0.5,1],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Mount, outlets and energy budget","status":"check","detail":"Confirm securement and the actual fridge/device consumption. Storage capacity does not establish output or runtime.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Secure the unit and provide ventilation, appropriate DC connections and an energy budget. Charger and solar panels are separate."}],"documents":[{"id":"jackery1500-manual","productIds":["acc-jackery1500"],"type":"manual","title":"Explorer 1500 Ultra user manual · JE-1500C","url":"https://cdn.shopify.com/s/files/1/0970/9262/files/Jackery_Explorer_1500_Ultra_USER_MANUAL.pdf?v=1766979182","publisher":"Jackery","scope":"Explorer 1500 Ultra · JE-1500C","note":"Charging, outputs and operation; not an LC250 bracket, restraint or permanent wiring procedure.","match":"exact","official":true,"source":"https://cdn.shopify.com/s/files/1/0970/9262/files/Jackery_Explorer_1500_Ultra_USER_MANUAL.pdf?v=1766979182","purpose":"setup","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"bfa1d586-30f3-447c-a2e1-8c47c5dbf781","productIds":["acc-jackery1500"],"author":"KLoney","date":null,"source":"https://www.jackery.com/products/jackery-explorer-1500-ultra-portable-power-station?variant=42447145435223","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"First camping use; no vehicle stated","summary":"Reports using solar charging and heating water on an initial camping trip.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"1362fd34-9f62-4e41-88fa-ed1fd4317cb7","productIds":["acc-jackery1500"],"author":"Darius D.","date":null,"source":"https://www.jackery.com/products/jackery-explorer-1500-ultra-portable-power-station?variant=42447145435223","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"ICECO VL45 fridge and aftermarket splitter; not the catalog APL35","summary":"Reports unreliable contact at the 12V socket after using a splitter during a camping trip.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"},{"id":"f60b7554-9ae9-4daf-b6f7-594f5c2b30ea","productIds":["acc-jackery1500"],"author":"GW","date":"2026-04-16","source":"https://www.jackery.com/products/jackery-explorer-1500-ultra-portable-power-station?variant=42447145435223","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Product model; selected variant not established","context":"AC charging tested; solar not tested","summary":"Reports an initial shutdown, then updates that later use was trouble-free and support offered assistance.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-jackerycharger","slug":"jackery-dc-dc-alternator-charger","path":"/products/jackery-dc-dc-alternator-charger","name":"Jackery DC-DC Alternator Charger","brand":"JACKERY","brandPath":"/brands/jackery","category":"power","categorySlug":"power-and-electrical","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-jackerycharger","cat":"power","subcat":"DC-DC chargers","name":"Jackery DC-DC Alternator Charger","slot":"dcdc","modelId":"dcdc","brand":"JACKERY","sku":"21-0006-000144","variant":"Default Title","source":"https://www.jackery.com/products/jackery-dc-dc-alternator-charger?variant=42026211835991","price":239,"image":"acc-jackerycharger","gross":null,"weight":null,"weightVerified":false,"hmin":3,"hmax":5,"desc":"600 W alternator charger for manufacturer-compatible Jackery DC8020-input stations.","specs":"21-0006-000144; 12/24 V vehicle input; professional installation recommended.","explain":"Confirm hybrid vehicle supply capacity, DC8020 station compatibility, input protection, ACC control and cable routing.","realAccessory":true,"icon":"▰","visual":"dcdc","checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment · mounting and system compatibility required","includes":"Selected product variant and manufacturer-listed hardware only; confirm packing list.","deps":[{"label":"Manufacturer-compatible Jackery station","slots":["station"],"note":"Confirm the exact station and approved charger output cable.","page":"power","ids":["acc-jackery1500"]}],"checks":[{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"}],"available":true,"offers":[{"seller":"Jackery","price":239,"url":"https://www.jackery.com/products/jackery-dc-dc-alternator-charger?variant=42026211835991"}],"imageSource":"https://cdn.shopify.com/s/files/1/0970/9262/files/jackery-dc-dc-alternator-charger-9893119.png?v=1760417604","label":"Default Title","choice":null,"url":"/products/jackery-dc-dc-alternator-charger","priceAmount":239,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · mounting and system compatibility required","installHours":[3,5],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected product variant and manufacturer-listed hardware only; confirm packing list."},{"label":"Manufacturer-compatible Jackery station","status":"check","detail":"Confirm the exact station and approved charger output cable.","page":"power"},{"label":"Protected electrical supply","status":"check","detail":"Installer must specify wire gauge, fuse protection, connections and available vehicle current. Quote unlisted hardware and combined cable routing.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm hybrid vehicle supply capacity, DC8020 station compatibility, input protection, ACC control and cable routing."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"jackerycharger-manual","productIds":["acc-jackerycharger"],"type":"manual","title":"DC-DC charger installation and user manual · JA-AD600A","url":"https://cdn.shopify.com/s/files/1/0970/9262/files/Jackery_DC-DC_Charger_User_Manual.pdf?v=1760154687","publisher":"Jackery","scope":"DC-DC alternator charger · JA-AD600A","note":"Covers charger installation and electrical connections. This is not an LC250-specific routing or hybrid integration guide; confirm the vehicle power source and selected power station with the installer.","match":"exact","official":true,"source":"https://cdn.shopify.com/s/files/1/0970/9262/files/Jackery_DC-DC_Charger_User_Manual.pdf?v=1760154687","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"charger-test","productIds":["acc-jackerycharger"],"author":"Dense_Election_1117","date":null,"source":"https://www.reddit.com/r/Jackery/comments/1oop83v/dc_to_dc_charger/","sourceName":"Owner forum report","kind":"owner","scope":"Charger model; not LC250 or 1500 Ultra performance validation","context":"Jackery 1000 Plus; vehicle unconfirmed","summary":"Reports about 400 W charging a 1000 Plus; wiring concealment was the main installation task. Follow-up says this was an initial test.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"charger-transit","productIds":["acc-jackerycharger"],"author":"Customer, November 11 review","date":"2025-11-11","source":"https://shop.app/products/7491656450135/jackery-dc-dc-alternator-charger","sourceName":"Customer review on Shop / Jackery","kind":"customer","scope":"Charger model; different vehicle/power station","context":"2023 Ford Transit and Explorer 2000 Plus","summary":"Reports roughly 600 W to a 2000 Plus while driving and useful ACC-switch control.","sourceVerified":false,"verification":"Customer review; purchase not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"blaze-lc250","slug":"blaze-lc250-power-relocation-kit","path":"/products/blaze-lc250-power-relocation-kit","name":"Blaze LC250 power relocation kit","brand":"BLAZE OFF-ROAD","brandPath":"/brands/blaze-off-road","category":"power","categorySlug":"power-and-electrical","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-blaze-relocation","cat":"power","subcat":"Distribution & switching","name":"Blaze LC250 relocation · no PowerSwitch","slot":"distribution","modelId":"blaze","brand":"BLAZE OFF-ROAD","sku":"LC250-004","variant":"Power Relocation Install Kit - No Garmin PowerSwitch.","source":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=50715411218732","price":899.95,"image":"acc-blaze-relocation","gross":null,"weight":null,"weightVerified":false,"hmin":5,"hmax":8,"desc":"Exact LC250 power-relocation variant; switching contents differ by selection.","specs":"0 Garmin PowerSwitch units included · rear-battery-to-underhood power distribution · exact bundle LC250-004.","explain":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system.","realAccessory":true,"icon":"▰","visual":"blaze","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"0 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list. Switching controller is not included; existing compatible switching or a separately purchased controller is needed if switched outputs are required.","deps":[],"checks":[{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"}],"available":true,"offers":[{"seller":"Blaze Off-Road","price":899.95,"url":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=50715411218732"}],"imageSource":"https://cdn.shopify.com/s/files/1/0761/2989/4700/files/DSC05753.jpg?v=1749498440","imageNote":"Manufacturer family photo may show additional PowerSwitch units. The selected variant controls included switch quantity.","label":"0 · No PowerSwitch included","choice":null,"url":"/products/blaze-lc250-power-relocation-kit?variant=acc-blaze-relocation","priceAmount":899.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[5,8],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"0 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list. Switching controller is not included; existing compatible switching or a separately purchased controller is needed if switched outputs are required."},{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"blaze-overview","productIds":["acc-blaze-relocation","acc-blaze-one","acc-blaze-two"],"type":"reference","title":"LC250 hybrid power relocation installation overview","url":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","publisher":"Blaze Off-Road","scope":"LC250 hybrid family · partial overview","note":"Lists tools, 2–4 hour expectation and system layout. Downloadable instructions are marked COMING SOON; no complete installation video was verified. Obtain current kit instructions from Blaze.","match":"family","official":true,"source":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-blaze-one","cat":"power","subcat":"Distribution & switching","name":"Blaze LC250 relocation · one PowerSwitch","slot":"distribution","modelId":"blaze","brand":"BLAZE OFF-ROAD","sku":"LC250-003","variant":"Power Relocation Complete Kit - One Garmin PowerSwitch","source":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=51204472668460","price":1349.95,"image":"acc-blaze-one","gross":null,"weight":null,"weightVerified":false,"hmin":5,"hmax":8,"desc":"Exact LC250 power-relocation variant; switching contents differ by selection.","specs":"1 Garmin PowerSwitch units included · rear-battery-to-underhood power distribution · exact bundle LC250-003.","explain":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system.","realAccessory":true,"icon":"▰","visual":"blaze","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"1 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list.","deps":[],"checks":[{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"}],"available":true,"offers":[{"seller":"Blaze Off-Road","price":1349.95,"url":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=51204472668460"}],"imageSource":"https://cdn.shopify.com/s/files/1/0761/2989/4700/files/DSC05753.jpg?v=1749498440","imageNote":"Manufacturer family photo may show additional PowerSwitch units. The selected variant controls included switch quantity.","label":"1 · One PowerSwitch included","choice":null,"url":"/products/blaze-lc250-power-relocation-kit?variant=acc-blaze-one","priceAmount":1349.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[5,8],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"1 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list."},{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"blaze-overview","productIds":["acc-blaze-relocation","acc-blaze-one","acc-blaze-two"],"type":"reference","title":"LC250 hybrid power relocation installation overview","url":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","publisher":"Blaze Off-Road","scope":"LC250 hybrid family · partial overview","note":"Lists tools, 2–4 hour expectation and system layout. Downloadable instructions are marked COMING SOON; no complete installation video was verified. Obtain current kit instructions from Blaze.","match":"family","official":true,"source":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-blaze-two","cat":"power","subcat":"Distribution & switching","name":"Blaze LC250 relocation · two PowerSwitch units","slot":"distribution","modelId":"blaze","brand":"BLAZE OFF-ROAD","sku":"LC250-003","variant":"Power Relocation Complete Kit - Two Garmin PowerSwitch Units","source":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=50715411185964","price":1799.95,"image":"acc-blaze-two","gross":null,"weight":null,"weightVerified":false,"hmin":5,"hmax":8,"desc":"Exact LC250 power-relocation variant; switching contents differ by selection.","specs":"2 Garmin PowerSwitch units included · rear-battery-to-underhood power distribution · exact bundle LC250-003.","explain":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system.","realAccessory":true,"icon":"▰","visual":"blaze","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer LC250 listing · confirm year, grade and exact installation","includes":"2 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list.","deps":[],"checks":[{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"}],"available":true,"offers":[{"seller":"Blaze Off-Road","price":1799.95,"url":"https://blazeoffroad.com/products/2024-toyota-land-cruiser-complete-power-system?variant=50715411185964"}],"imageSource":"https://cdn.shopify.com/s/files/1/0761/2989/4700/files/DSC05753.jpg?v=1749498440","imageNote":"Manufacturer family photo may show additional PowerSwitch units. The selected variant controls included switch quantity.","label":"2 · Two PowerSwitches included","choice":null,"url":"/products/blaze-lc250-power-relocation-kit?variant=acc-blaze-two","priceAmount":1799.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer LC250 listing · confirm year, grade and exact installation","installHours":[5,8],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"2 Garmin PowerSwitch units; manufacturer-listed relocation cables, pass-throughs, fused power hardware, ground bar and mounting bracket. Confirm the current selected-variant packing list."},{"label":"Drilling, sealing and electrical plan","status":"check","detail":"Manufacturer requires two rear fender-well pass-through holes. Confirm circuits, grounding, current demands and underhood space before combining kits.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Two 1-5/16-inch rear metal fender-well holes are required. Confirm routing/sealing and coordinate all high-current accessories; relocation is not a dual battery system."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"blaze-overview","productIds":["acc-blaze-relocation","acc-blaze-one","acc-blaze-two"],"type":"reference","title":"LC250 hybrid power relocation installation overview","url":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","publisher":"Blaze Off-Road","scope":"LC250 hybrid family · partial overview","note":"Lists tools, 2–4 hour expectation and system layout. Downloadable instructions are marked COMING SOON; no complete installation video was verified. Obtain current kit instructions from Blaze.","match":"family","official":true,"source":"https://blazeoffroad.com/pages/lc250-power-relocation-system-install","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-kc-fe3","slug":"kc-flex-era-3-two-light-master-kit","path":"/products/kc-flex-era-3-two-light-master-kit","name":"KC FLEX ERA 3 · two-light Master Kit","brand":"KC HiLiTES","brandPath":"/brands/kc-hilites","category":"lighting","categorySlug":"lighting","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-kc-fe3","cat":"lighting","subcat":"Light pods","name":"KC FLEX ERA 3 · two-light Master Kit","brand":"KC HILITES","sku":"0288","price":499.99,"source":"https://www.kchilites.com/kc-flex-era-3-light-master-kit-pair-pack-288.html","slot":"lights","modelId":"lights","hmin":1.5,"hmax":3,"desc":"Universal two-pod light kit with wiring harness, switch, covers and interchangeable lenses.","specs":"0288; two 60 W pods; Combo lenses fitted; Spot lenses included.","explain":"LC250-specific brackets are separate. Confirm circuit protection, aim and road-use requirements.","gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"image":null,"imageSource":"https://www.kchilites.com/media/catalog/product/cache/47e8b20ee7c6c23ef89c6abb684e6cb7/0/2/0288_FE3_MASTER_KIT_COVERS_LENS_1_scaled_b444.jpeg","icon":"◉","visual":"lights","checked":"October 25, 2026 (Pacific)","variant":"Exact SKU listed","fitment":"Universal equipment · complete installation requires compatible vehicle mounting and connections","includes":"Universal two-pod light kit with wiring harness, switch, covers and interchangeable lenses.","deps":[{"label":"LC250 light brackets","slots":["ditch-brackets"],"note":"Select compatible LC250 mounts for this pod and position.","page":"lighting","ids":["acc-kc-brackets"]}],"checks":[{"label":"Power, aiming and permitted use","detail":"Use the supplied wiring as instructed, confirm safe vehicle supply and check local road-use/cover requirements.","page":"power","status":"check"}],"available":true,"offers":[{"seller":"KC HILITES","price":499.99,"url":"https://www.kchilites.com/kc-flex-era-3-light-master-kit-pair-pack-288.html"}],"laborGroup":"Auxiliary lights · brackets / wiring / aiming","label":"Exact SKU listed","choice":null,"url":"/products/kc-flex-era-3-two-light-master-kit","priceAmount":499.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · complete installation requires compatible vehicle mounting and connections","installHours":[1.5,3],"installBasis":"mounting, protected wiring, aiming and function checks. A separate bracket is not a complete light kit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Universal two-pod light kit with wiring harness, switch, covers and interchangeable lenses."},{"label":"LC250 light brackets","status":"check","detail":"Select compatible LC250 mounts for this pod and position.","page":"lighting"},{"label":"Power, aiming and permitted use","status":"check","detail":"Use the supplied wiring as instructed, confirm safe vehicle supply and check local road-use/cover requirements.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"LC250-specific brackets are separate. Confirm circuit protection, aim and road-use requirements."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"kc-harness","productIds":["acc-kc-fe3"],"type":"manual","title":"KC two-light three-position wiring harness instructions","url":"https://www.kchilites.com/mwdownloads/download/link/id/501","publisher":"KC HiLiTES","scope":"Component instructions · FLEX ERA 3 Master Kit 0288","note":"Manufacturer links this harness sheet from SKU 0288. Confirm the supplied harness part number. Vehicle power-source integration and LC250 bracket installation are separate.","match":"component","official":true,"source":"https://www.kchilites.com/kc-flex-era-3-light-master-kit-pair-pack-288.html","purpose":"installation","checked":"2026-10-25"},{"id":"kc-lens","productIds":["acc-kc-fe3"],"type":"manual","title":"KC FLEX ERA faceplate, bezel, lens and O-ring instructions","url":"https://www.kchilites.com/mwdownloads/download/link/id/410","publisher":"KC HiLiTES","scope":"Component instructions · FLEX ERA 3 Master Kit 0288","note":"Accessory servicing and lens/trim changes only. This is not a complete vehicle lighting or LC250 ditch-bracket installation guide.","match":"component","official":true,"source":"https://www.kchilites.com/kc-flex-era-3-light-master-kit-pair-pack-288.html","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-kc-brackets","slug":"kc-lc250-a-pillar-bracket-pair","path":"/products/kc-lc250-a-pillar-bracket-pair","name":"KC LC250 A-pillar bracket pair","brand":"KC HiLiTES","brandPath":"/brands/kc-hilites","category":"lighting","categorySlug":"lighting","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-kc-brackets","cat":"lighting","subcat":"Light mounts","name":"KC LC250 A-pillar bracket pair","brand":"KC HILITES","sku":"7385","price":79.99,"source":"https://www.kchilites.com/ditch-mount-7385.html","slot":"ditch-brackets","modelId":"gear","hmin":0.5,"hmax":1,"desc":"Driver/passenger bracket pair for the listed LC250 application. Lights are not included.","specs":"7385; factory hardware mounting; for suitable pod mounting studs.","explain":"Check hood/trim clearance and exact light stud/hardware compatibility.","gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"image":null,"imageSource":null,"icon":"◉","visual":"gear","checked":"October 25, 2026 (Pacific)","variant":"Exact SKU listed","fitment":"LC250-specific mount","includes":"Driver/passenger bracket pair for the listed LC250 application. Lights are not included.","deps":[{"label":"Compatible light pods","slots":["lights"],"note":"Choose pods approved for this bracket and verify installed clearances.","page":"lighting","ids":["acc-kc-fe3"]}],"checks":[],"available":true,"offers":[{"seller":"KC HILITES","price":79.99,"url":"https://www.kchilites.com/ditch-mount-7385.html"}],"laborGroup":"Auxiliary lights · brackets / wiring / aiming","label":"Exact SKU listed","choice":null,"url":"/products/kc-lc250-a-pillar-bracket-pair","priceAmount":79.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"LC250-specific mount","installHours":[0.5,1],"installBasis":"mounting, protected wiring, aiming and function checks. A separate bracket is not a complete light kit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Driver/passenger bracket pair for the listed LC250 application. Lights are not included."},{"label":"Compatible light pods","status":"check","detail":"Choose pods approved for this bracket and verify installed clearances.","page":"lighting"},{"label":"Installation / compatibility notes","status":"check","detail":"Check hood/trim clearance and exact light stud/hardware compatibility."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-arb-twin","slug":"arb-twin-onboard-compressor","path":"/products/arb-twin-onboard-compressor","name":"ARB Twin onboard compressor","brand":"ARB","brandPath":"/brands/arb","category":"air","categorySlug":"onboard-air","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-arb-twin","cat":"air","subcat":"Compressors","name":"ARB Twin onboard compressor","brand":"ARB","sku":"CKMTA12","price":659.95,"source":"https://store.arbusa.com/twin-motor-onboard-air-compressor-ckmta12/","slot":"air","modelId":"air","hmin":3,"hmax":5,"desc":"12 V twin-motor onboard compressor; vehicle mount and inflation plumbing are separate decisions.","specs":"17.4 lb compressor; 150 psi maximum; 68.6 A maximum; 6.16 CFM at 0 psi.","explain":"Verify protected high-current supply and an approved, ventilated location. A small distribution circuit is not a substitute.","gross":17.4,"weight":17.4,"weightVerified":true,"realAccessory":true,"image":"acc-arb-twin","imageSource":"https://cdn11.bigcommerce.com/s-wg9nennc1z/images/stencil/200x200/products/12220/13149314/arb-twin-motor-onboard-12v-air-compressor-ckmta12__44380.1781845030.jpg?c=1","icon":"◉","visual":"air","checked":"October 25, 2026 (Pacific)","variant":"Exact SKU listed","fitment":"Universal equipment · complete installation requires compatible vehicle mounting and connections","includes":"12 V twin-motor onboard compressor; vehicle mount and inflation plumbing are separate decisions.","deps":[{"label":"Compatible vehicle compressor mount","slots":["compressor-mount"],"note":"Select a documented LC250 mounting system and coordinate underhood space.","page":"air","ids":["acc-slee-mount"]},{"label":"Tire-inflation hose / fittings","slots":["airkit"],"note":"Confirm rated hose, outlet coupling and required plumbing.","page":"air","ids":["acc-arb-hose"]}],"checks":[{"label":"Electrical capacity and protection","detail":"Confirm manufacturer harness, fusing, current demand, cable route and service access against the complete vehicle build.","page":"power","status":"check"}],"available":true,"offers":[{"seller":"ARB","price":659.95,"url":"https://store.arbusa.com/twin-motor-onboard-air-compressor-ckmta12/"}],"laborGroup":"Onboard air · mounting / wiring / plumbing","label":"Exact SKU listed","choice":null,"url":"/products/arb-twin-onboard-compressor","priceAmount":659.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · complete installation requires compatible vehicle mounting and connections","installHours":[3,5],"installBasis":"mounting, protected electrical connections, outlet plumbing and leak / function checks. Compressor, mounting tray and hose work can overlap.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"12 V twin-motor onboard compressor; vehicle mount and inflation plumbing are separate decisions."},{"label":"Compatible vehicle compressor mount","status":"check","detail":"Select a documented LC250 mounting system and coordinate underhood space.","page":"air"},{"label":"Tire-inflation hose / fittings","status":"check","detail":"Confirm rated hose, outlet coupling and required plumbing.","page":"air"},{"label":"Electrical capacity and protection","status":"check","detail":"Confirm manufacturer harness, fusing, current demand, cable route and service access against the complete vehicle build.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Verify protected high-current supply and an approved, ventilated location. A small distribution circuit is not a substitute."}],"documents":[{"id":"arb-twin-manual","productIds":["acc-arb-twin"],"type":"manual","title":"CKMTA12 twin compressor installation guide","url":"https://store.arbusa.com/content/CKMTA12_Installation%20Guide.pdf","publisher":"ARB","scope":"CKMTA12 compressor · component manual","note":"Compressor mounting and electrical installation. Vehicle-specific tray, air fittings, heat protection and wiring integration need their own instructions.","match":"component","official":true,"source":"https://store.arbusa.com/content/CKMTA12_Installation%20Guide.pdf","purpose":"installation","checked":"2026-10-25"},{"id":"arb-twin-article","productIds":["acc-arb-twin"],"type":"guide","title":"ARB twin compressor installation walkthrough","url":"https://arbusa.com/news/arb-twin-compressor-installation-guide","publisher":"ARB","scope":"Twin compressor family · general installation","note":"Illustrated manufacturer walkthrough of mounting, remote coupling, loom and testing. Vehicle-specific brackets and LC250 hybrid power integration are separate.","match":"family","official":true,"source":"https://arbusa.com/news/arb-twin-compressor-installation-guide","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"arb-internal","productIds":["acc-arb-twin"],"author":"unsung","date":"2020-07-05","source":"https://forum.expeditionportal.com/threads/arb-twin-12-volt-air-compressor-ckmta12-troubleshooting.216721/","sourceName":"Owner forum report","kind":"owner","scope":"CKMTA12 model; old installation/revision and unresolved individual report","context":"Older Land Cruiser with SLEE second-battery tray; not LC250","summary":"Reports that a newly installed compressor stopped running before field use and sought ARB troubleshooting.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-slee-mount","slug":"slee-lc250-compressor-multi-mount","path":"/products/slee-lc250-compressor-multi-mount","name":"SLEE LC250 compressor / multi mount","brand":"SLEE","brandPath":"/brands/slee","category":"air","categorySlug":"onboard-air","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-slee-mount","cat":"air","subcat":"Mounts","name":"SLEE LC250 compressor / multi mount","brand":"SLEE","sku":"SOK2105","price":375,"source":"https://sleeoffroad.com/products/sok2105/","slot":"compressor-mount","modelId":"gear","hmin":1.5,"hmax":3,"desc":"Vehicle mount for ARB Single, Twin or Brushless Twin; compressor is not included.","specs":"SOK2105; reorients engine and transmission ECUs; mounting hardware included.","explain":"Confirm powertrain and ECU arrangement and compatibility with other underhood electrical kits. Coordinate labor with compressor installation.","gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"image":null,"imageSource":null,"icon":"◉","visual":"gear","checked":"October 25, 2026 (Pacific)","variant":"Exact SKU listed","fitment":"LC250-specific mount","includes":"Vehicle mount for ARB Single, Twin or Brushless Twin; compressor is not included.","deps":[{"label":"Compatible compressor or electrical equipment","slots":["air"],"note":"Confirm the exact accessory and mounting fasteners.","page":"air","ids":["acc-arb-twin","acc-arb-brushless"]}],"checks":[{"label":"ECU relocation and underhood conflicts","detail":"Verify current SLEE instructions and the combined fit with battery relocation/distribution products. Do not assume separate kits share the space.","page":"power","status":"check"}],"available":true,"offers":[{"seller":"SLEE Off Road","price":375,"url":"https://sleeoffroad.com/products/sok2105/"}],"laborGroup":"Onboard air · mounting / wiring / plumbing","label":"Exact SKU listed","choice":null,"url":"/products/slee-lc250-compressor-multi-mount","priceAmount":375,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"LC250-specific mount","installHours":[1.5,3],"installBasis":"mounting, protected electrical connections, outlet plumbing and leak / function checks. Compressor, mounting tray and hose work can overlap.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Vehicle mount for ARB Single, Twin or Brushless Twin; compressor is not included."},{"label":"Compatible compressor or electrical equipment","status":"check","detail":"Confirm the exact accessory and mounting fasteners.","page":"air"},{"label":"ECU relocation and underhood conflicts","status":"check","detail":"Verify current SLEE instructions and the combined fit with battery relocation/distribution products. Do not assume separate kits share the space.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm powertrain and ECU arrangement and compatibility with other underhood electrical kits. Coordinate labor with compressor installation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"slee-mount-guide","productIds":["acc-slee-mount"],"type":"reference","title":"SOK2105 installation instructions and media","url":"https://sleeoffroad.com/tech-zone/installation-instructions/sok2105-media/","publisher":"SLEE Off Road","scope":"SOK2105 · LC250 / Tacoma multi mount","note":"Manufacturer page is labeled SOK2105 installation instructions, but the complete instruction media could not be verified in this pass. Request the current guide from SLEE; this landing page is not counted as a written installation guide.","match":"reference","official":true,"source":"https://sleeoffroad.com/tech-zone/installation-instructions/sok2105-media/","purpose":"support","checked":"2026-10-25"}],"videos":[{"id":"slee-fittings","productIds":["acc-slee-mount"],"type":"video","title":"Re-indexing fittings on an ARB air line","url":"https://www.youtube.com/watch?v=W8JMu1IzFrM","publisher":"SLEE Off Road","scope":"Official mount supplier · fitting subtask only","note":"Linked by SLEE SOK2105 documentation. Does not show the complete tray or compressor installation.","match":"component","official":true,"source":"https://sleeoffroad.com/products/sok2105/","purpose":"installation","checked":"2026-10-25","creator":"SLEE Off Road"}],"reviews":[],"clearance":null}]},{"id":"acc-arb-hose","slug":"arb-pump-up-kit-v2","path":"/products/arb-pump-up-kit-v2","name":"ARB Pump Up Kit V2","brand":"ARB","brandPath":"/brands/arb","category":"air","categorySlug":"onboard-air","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-arb-hose","cat":"air","subcat":"Inflation tools","name":"ARB Pump Up Kit V2","brand":"ARB / SLEE","sku":"171302V2","price":99.95,"source":"https://sleeoffroad.com/products/171302v2/","slot":"airkit","modelId":"gear","hmin":0.25,"hmax":0.5,"desc":"Inflation hose, quick connections, air chuck and T-piece; compressor not included.","specs":"171302V2; seller lists 20-ft hose; verify supplied revision.","explain":"Verify outlet adapter/plumbing with the chosen compressor. Shipping weight is not used as equipment mass.","gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"image":null,"imageSource":null,"icon":"◉","visual":"gear","checked":"October 25, 2026 (Pacific)","variant":"Exact SKU listed","fitment":"Universal equipment · complete installation requires compatible vehicle mounting and connections","includes":"Inflation hose, quick connections, air chuck and T-piece; compressor not included.","deps":[{"label":"Compatible compressor and outlet","slots":["air"],"note":"Verify high-temperature hose, pressure and coupling compatibility.","page":"air","ids":["acc-arb-twin"]}],"checks":[],"available":true,"offers":[{"seller":"ARB / SLEE","price":99.95,"url":"https://sleeoffroad.com/products/171302v2/"}],"laborGroup":"Onboard air · mounting / wiring / plumbing","label":"Exact SKU listed","choice":null,"url":"/products/arb-pump-up-kit-v2","priceAmount":99.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment · complete installation requires compatible vehicle mounting and connections","installHours":[0.25,0.5],"installBasis":"mounting, protected electrical connections, outlet plumbing and leak / function checks. Compressor, mounting tray and hose work can overlap.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Inflation hose, quick connections, air chuck and T-piece; compressor not included."},{"label":"Compatible compressor and outlet","status":"check","detail":"Verify high-temperature hose, pressure and coupling compatibility.","page":"air"},{"label":"Installation / compatibility notes","status":"check","detail":"Verify outlet adapter/plumbing with the chosen compressor. Shipping weight is not used as equipment mass."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-fuel-lra","slug":"long-range-america-24-gallon-auxiliary-tank","path":"/products/long-range-america-24-gallon-auxiliary-tank","name":"Long Range America 24-gallon auxiliary tank","brand":"LONG RANGE AMERICA","brandPath":"/brands/long-range-america","category":"fuel","categorySlug":"fuel-and-range","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-fuel-lra","name":"Long Range America 24-gallon auxiliary tank","brand":"LONG RANGE AMERICA","sku":"TLCP250RA-P-US","variant":"24-gallon gasoline auxiliary system · standard pump","price":2995,"source":"https://longrangeamerica.com/product/toyota-land-cruiser-250-series-24-gallon-auxiliary-extended-long-range-fuel-tank-long-range-america","subcat":"Auxiliary tanks","slot":"aux-fuel-tank","fuelCapacity":24,"gross":85,"hmin":8,"hmax":8,"manufacturerHours":true,"laborPublisher":"supplier","laborSource":"https://exitoffroad.com/product/toyota-land-cruiser-250-auxiliary-fuel-gas-tank-24-gallon-capacity/","manualUrl":"https://exitoffroad.com/product/toyota-land-cruiser-250-auxiliary-fuel-gas-tank-24-gallon-capacity/","desc":"Additional gasoline capacity under the rear cargo area; factory tank retained.","specs":"24 US gal additional · switched transfer pump · OEM fuel door / dual filler · spare relocation required.","includes":"Auxiliary tank, dual filler arrangement, transfer pump and listed mounting components. Spare carrier and fuel are separate.","explain":"Supplier lists 85 lb empty and approximately 8 professional installation hours. Relocate the factory spare; verify rear skid, hitch and bumper clearances. California eligibility pending: Exit Offroad explicitly says not to order for California. Obtain documented eligibility for the exact vehicle before purchase.","eligibility":"California eligibility pending · seller restricts California orders","checks":[{"label":"California purchase restriction","status":"conflict","detail":"Exit Offroad instructs California residents not to order this product. California road-use eligibility has not been verified; this is a research option, not a California recommendation."},{"label":"Spare relocation and clearance","status":"quote","detail":"Spare must move out of the factory underbody location. Quote a suitable carrier and verify hitch capacity, rear clearance and skid compatibility.","page":"bumpers"},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."}],"cat":"fuel","realAccessory":true,"icon":"▥","weight":null,"weightVerified":false,"checked":"October 25, 2026 (Pacific)","fitment":"US gasoline LC250 2024+ listing; confirm exact year/grade/VIN","deps":[],"available":true,"offers":[{"seller":"LONG RANGE AMERICA","price":2995,"url":"https://longrangeamerica.com/product/toyota-land-cruiser-250-series-24-gallon-auxiliary-extended-long-range-fuel-tank-long-range-america"},{"seller":"Exit Offroad · California restriction","price":2995,"url":"https://exitoffroad.com/product/toyota-land-cruiser-250-auxiliary-fuel-gas-tank-24-gallon-capacity/"}],"mountArea":"rear","label":"24-gallon gasoline auxiliary system · standard pump","choice":null,"url":"/products/long-range-america-24-gallon-auxiliary-tank","priceAmount":2995,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"US gasoline LC250 2024+ listing; confirm exact year/grade/VIN","installHours":[8,8],"installBasis":"tank mounting, filler/transfer plumbing, protected pump wiring and leak/function checks, or pack mounting to an existing rated surface. Read the exact product scope; container-only setup excludes mount work.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Auxiliary tank, dual filler arrangement, transfer pump and listed mounting components. Spare carrier and fuel are separate."},{"label":"Loaded fuel and spring planning","status":"check","detail":"24 US gal adds approximately 144 lb of gasoline at full capacity, before dry tank/container and mounting weight. Review full and empty load cases; do not choose constant-load springs solely for occasionally carried fuel.","page":"suspension"},{"label":"California purchase restriction","status":"conflict","detail":"Exit Offroad instructs California residents not to order this product. California road-use eligibility has not been verified; this is a research option, not a California recommendation."},{"label":"Spare relocation and clearance","status":"quote","detail":"Spare must move out of the factory underbody location. Quote a suitable carrier and verify hitch capacity, rear clearance and skid compatibility.","page":"bumpers"},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."},{"label":"Installation / compatibility notes","status":"check","detail":"Supplier lists 85 lb empty and approximately 8 professional installation hours. Relocate the factory spare; verify rear skid, hitch and bumper clearances. California eligibility pending: Exit Offroad explicitly says not to order for California. Obtain documented eligibility for the exact vehicle before purchase."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"lra-scope","productIds":["acc-fuel-lra"],"type":"reference","title":"LC250 auxiliary tank supplier installation scope","url":"https://exitoffroad.com/product/toyota-land-cruiser-250-auxiliary-fuel-gas-tank-24-gallon-capacity/","publisher":"Exit Offroad","scope":"LC250 tank reference · full fitting instructions pending","note":"Retailer product and installation-scope reference. Not a manufacturer installation manual; obtain the current TLCP250RA-P-US instructions from the supplier.","match":"reference","official":false,"source":"https://exitoffroad.com/product/toyota-land-cruiser-250-auxiliary-fuel-gas-tank-24-gallon-capacity/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-fuel-helivue","slug":"helivue-18-gallon-auxiliary-tank","path":"/products/helivue-18-gallon-auxiliary-tank","name":"Helivue 18-gallon auxiliary tank","brand":"HELIVUE DESIGN","brandPath":"/brands/helivue-design","category":"fuel","categorySlug":"fuel-and-range","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-fuel-helivue","name":"Helivue 18-gallon auxiliary tank","brand":"HELIVUE DESIGN","sku":"TL2024","variant":"18-gallon LC250 gasoline system","price":2300,"source":"https://helivuedesign.com/products/2024-current-toyota-land-cruiser-250-auxiliary-fuel-tank-system-18-gallon?variant=46157911261442","subcat":"Auxiliary tanks","slot":"aux-fuel-tank","fuelCapacity":18,"gross":25,"hmin":5,"hmax":5,"manufacturerHours":true,"laborSource":"https://helivuedesign.com/products/2024-current-toyota-land-cruiser-250-auxiliary-fuel-tank-system-18-gallon","manualUrl":"https://helivuedesign.com/blogs/news/the-land-cruiser-250-auxiliary-fuel-tank-18-more-gallons-no-spare-tire-swap","image":"acc-fuel-helivue","desc":"Aluminum auxiliary fuel system with pump, sender and transfer control.","specs":"18 US gal additional · 25 lb listed empty · 5 hr published install · spare-fitment conflict.","includes":"Tank, transfer pump, level sender, programmable switch and listed installation hardware.","explain":"Manufacturer product table says relocate spare: Yes; its September 2026 article says the spare stays. Resolve this contradiction for the exact kit before buying. Dry installed net weight remains pending because removed/supporting parts are not fully accounted for. California eligibility pending; retaining factory EVAP is not itself certification.","eligibility":"California eligibility pending · exact application requires confirmation","checks":[{"label":"Conflicting spare fitment","status":"conflict","detail":"Manufacturer product table requires spare relocation, but its newer article says no relocation. Request written confirmation for TL2024 and your spare size before purchase."},{"label":"California eligibility","status":"check","detail":"No exact LC250 California approval was verified. Request supporting documentation before purchase."},{"label":"Installation modifications","status":"quote","detail":"Manufacturer article describes crossmember support trimming, plug relocation, hybrid speaker/shield relocation and filler-neck bonding. Confirm the current instructions and quote the complete scope."},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."}],"cat":"fuel","realAccessory":true,"icon":"▥","weight":null,"weightVerified":false,"checked":"October 25, 2026 (Pacific)","fitment":"US gasoline LC250 2024+ listing; confirm exact year/grade/VIN","deps":[],"available":true,"offers":[{"seller":"HELIVUE DESIGN","price":2300,"url":"https://helivuedesign.com/products/2024-current-toyota-land-cruiser-250-auxiliary-fuel-tank-system-18-gallon?variant=46157911261442"}],"mountArea":"rear","label":"18-gallon LC250 gasoline system","choice":null,"url":"/products/helivue-18-gallon-auxiliary-tank","priceAmount":2300,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"US gasoline LC250 2024+ listing; confirm exact year/grade/VIN","installHours":[5,5],"installBasis":"tank mounting, filler/transfer plumbing, protected pump wiring and leak/function checks, or pack mounting to an existing rated surface. Read the exact product scope; container-only setup excludes mount work.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Tank, transfer pump, level sender, programmable switch and listed installation hardware."},{"label":"Loaded fuel and spring planning","status":"check","detail":"18 US gal adds approximately 108 lb of gasoline at full capacity, before dry tank/container and mounting weight. Review full and empty load cases; do not choose constant-load springs solely for occasionally carried fuel.","page":"suspension"},{"label":"Conflicting spare fitment","status":"conflict","detail":"Manufacturer product table requires spare relocation, but its newer article says no relocation. Request written confirmation for TL2024 and your spare size before purchase."},{"label":"California eligibility","status":"check","detail":"No exact LC250 California approval was verified. Request supporting documentation before purchase."},{"label":"Installation modifications","status":"quote","detail":"Manufacturer article describes crossmember support trimming, plug relocation, hybrid speaker/shield relocation and filler-neck bonding. Confirm the current instructions and quote the complete scope."},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer product table says relocate spare: Yes; its September 2026 article says the spare stays. Resolve this contradiction for the exact kit before buying. Dry installed net weight remains pending because removed/supporting parts are not fully accounted for. California eligibility pending; retaining factory EVAP is not itself certification."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"helivue-scope","productIds":["acc-fuel-helivue"],"type":"reference","title":"LC250 auxiliary tank system overview","url":"https://helivuedesign.com/blogs/news/the-land-cruiser-250-auxiliary-fuel-tank-18-more-gallons-no-spare-tire-swap","publisher":"Helivue Design","scope":"LC250 tank reference · full fitting instructions pending","note":"Manufacturer design and installation-scope overview, not a complete fitting manual. Obtain current tank, plumbing and wiring instructions.","match":"reference","official":true,"source":"https://helivuedesign.com/blogs/news/the-land-cruiser-250-auxiliary-fuel-tank-18-more-gallons-no-spare-tire-swap","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-fuel-rotopax","slug":"rotopax-3-gallon-gasoline-container","path":"/products/rotopax-3-gallon-gasoline-container","name":"RotopaX 3-gallon gasoline container","brand":"ROTOPAX","brandPath":"/brands/rotopax","category":"fuel","categorySlug":"fuel-and-range","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-fuel-rotopax","name":"RotopaX 3-gallon gasoline container","brand":"ROTOPAX","sku":"RX-3G","variant":"Red 3 US gallon gasoline pack · container only","price":119.99,"source":"https://www.rotopax.com/products/3-gallon-gasoline-new?variant=43323077197978","subcat":"Portable fuel","slot":"portable-fuel","fuelCapacity":3,"gross":null,"hmin":0,"hmax":0,"image":"acc-fuel-rotopax","desc":"Portable gasoline container; fuel is poured manually into the vehicle.","specs":"3 US gal · 16 × 15 × 4½ in · cap/spout included · mount separate.","includes":"Gasoline pack, cap and spout. Pack mount and vehicle mounting plate are not included.","explain":"Manufacturer claims CARB/EPA 50-state compliance for this portable container. That claim does not approve an auxiliary tank or a particular vehicle mounting installation. Empty weight is unverified. Container handling has no installation labor; mounting work is quoted separately.","eligibility":"Manufacturer claims CARB/EPA 50-state container compliance","deps":[{"label":"Compatible pack mount","ids":["acc-fuel-mount"],"note":"Add a compatible pack mount and verify a rated exterior vehicle mounting surface.","page":"fuel"}],"checks":[{"label":"Exterior mounting and access","status":"check","detail":"Confirm carrier/plate strength for the full container, exhaust/heat clearance, hatch access and unobstructed lights/plate. Follow container transport and venting instructions."}],"cat":"fuel","realAccessory":true,"icon":"▥","weight":null,"weightVerified":false,"checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment; LC250 mounting is not certified","available":true,"offers":[{"seller":"ROTOPAX","price":119.99,"url":"https://www.rotopax.com/products/3-gallon-gasoline-new?variant=43323077197978"}],"label":"Red 3 US gallon gasoline pack · container only","choice":null,"url":"/products/rotopax-3-gallon-gasoline-container","priceAmount":119.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment; LC250 mounting is not certified","installHours":[0,0],"installBasis":"tank mounting, filler/transfer plumbing, protected pump wiring and leak/function checks, or pack mounting to an existing rated surface. Read the exact product scope; container-only setup excludes mount work.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Gasoline pack, cap and spout. Pack mount and vehicle mounting plate are not included."},{"label":"Loaded fuel and spring planning","status":"check","detail":"3 US gal adds approximately 18 lb of gasoline at full capacity, before dry tank/container and mounting weight. Review full and empty load cases; do not choose constant-load springs solely for occasionally carried fuel.","page":"suspension"},{"label":"Compatible pack mount","status":"check","detail":"Add a compatible pack mount and verify a rated exterior vehicle mounting surface.","page":"fuel"},{"label":"Exterior mounting and access","status":"check","detail":"Confirm carrier/plate strength for the full container, exhaust/heat clearance, hatch access and unobstructed lights/plate. Follow container transport and venting instructions."},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer claims CARB/EPA 50-state compliance for this portable container. That claim does not approve an auxiliary tank or a particular vehicle mounting installation. Empty weight is unverified. Container handling has no installation labor; mounting work is quoted separately."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-fuel-mount","slug":"rotopax-dlx-pack-mount","path":"/products/rotopax-dlx-pack-mount","name":"RotopaX DLX pack mount","brand":"ROTOPAX","brandPath":"/brands/rotopax","category":"fuel","categorySlug":"fuel-and-range","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-fuel-mount","name":"RotopaX DLX pack mount","brand":"ROTOPAX","sku":"RX-DLX-PM","variant":"DLX pack mount · single mount","price":59.99,"source":"https://www.rotopax.com/products/dlx-pack-mount?variant=43323099971738","subcat":"Mounts","slot":"fuel-pack-mount","gross":null,"hmin":0.5,"hmax":1,"image":"acc-fuel-mount","desc":"Clamping mount for a compatible fuel pack; vehicle plate is separate.","specs":"RotopaX / FuelpaX mount · 4 × 1 × 3⅜ in · non-locking.","includes":"DLX pack mount as listed. Fuel container and vehicle-specific supporting plate/carrier are separate.","explain":"Planning labor covers fastening to an existing verified mounting surface and checking access; fabrication or a new carrier is extra. Exact product weight is pending.","eligibility":"Mounting hardware · no fuel-system approval implied","checks":[{"label":"Rated mounting surface","status":"quote","detail":"Confirm a suitable carrier or plate, fastening and full-container load rating. Price excludes vehicle-specific brackets or fabrication."}],"cat":"fuel","realAccessory":true,"icon":"▥","weight":null,"weightVerified":false,"checked":"October 25, 2026 (Pacific)","fitment":"Universal equipment; LC250 mounting is not certified","deps":[],"available":true,"offers":[{"seller":"ROTOPAX","price":59.99,"url":"https://www.rotopax.com/products/dlx-pack-mount?variant=43323099971738"}],"label":"DLX pack mount · single mount","choice":null,"url":"/products/rotopax-dlx-pack-mount","priceAmount":59.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal equipment; LC250 mounting is not certified","installHours":[0.5,1],"installBasis":"tank mounting, filler/transfer plumbing, protected pump wiring and leak/function checks, or pack mounting to an existing rated surface. Read the exact product scope; container-only setup excludes mount work.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"DLX pack mount as listed. Fuel container and vehicle-specific supporting plate/carrier are separate."},{"label":"Rated mounting surface","status":"quote","detail":"Confirm a suitable carrier or plate, fastening and full-container load rating. Price excludes vehicle-specific brackets or fabrication."},{"label":"Installation / compatibility notes","status":"check","detail":"Planning labor covers fastening to an existing verified mounting surface and checking access; fabrication or a new carrier is extra. Exact product weight is pending."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-fuel-fk-main","slug":"fk-29-gallon-replacement-main-tank","path":"/products/fk-29-gallon-replacement-main-tank","name":"FK 29-gallon replacement main tank","brand":"FK Industries","brandPath":"/brands/fk-industries","category":"fuel","categorySlug":"fuel-and-range","addedOn":null,"defaultIndex":0,"variants":[{"id":"acc-fuel-fk-main","cat":"fuel","subcat":"Replacement tanks","name":"FK 29-gallon replacement main tank","brand":"FK INDUSTRIES / SLEE","sku":"FK-LC250-MAIN-TANK","variant":"SLEE listed 29-gallon LC250 replacement system","source":"https://sleeoffroad.com/products/fk-lc250-main-tank/","price":1995,"realAccessory":true,"icon":"▥","slot":"main-fuel-tank","weight":null,"weightVerified":false,"gross":null,"totalCapacity":29,"fuelCapacity":11.1,"hmin":4,"hmax":5,"manufacturerHours":true,"laborPublisher":"supplier","laborSource":"https://sleeoffroad.com/products/fk-lc250-main-tank/","manualUrl":"https://fkoffroad.com/products/fk-notvuch-110l-29-gallon-main-fuel-tank-fit-for-lc250","desc":"Replaces the factory main tank; uses the original pump and sender.","specs":"29 US gal total · ≈11.1 gal extra versus 17.9 gal baseline · spare retained per SLEE · integrated skid.","includes":"Replacement main tank, brackets and hardware per SLEE; reuses factory fuel pump, sender and fill tube.","explain":"SLEE lists this option out of stock at $1,995, 4–5 installation hours and 81 lb item weight. FK’s 110L page instead lists 24 kg and 2–3 hours; exact revision equivalence is unconfirmed, so dry weight stays pending and prices are not combined as identical offers. Added gasoline is calculated above a 17.9-gallon stock baseline, not all 29 gallons. Manufacturer fitment-year wording also needs exact VIN confirmation.","eligibility":"California eligibility pending · confirm exact US hybrid revision","checked":"October 25, 2026 (Pacific)","fitment":"SLEE LC250 2024–2027 application; confirm exact US hybrid/VIN and revision","deps":[],"checks":[{"label":"Product revision and weight conflict","status":"conflict","detail":"SLEE lists 81 lb and 4–5 hours; FK 110L page lists 24 kg and 2–3 hours. Confirm exact kit revision and installed net weight before purchase."},{"label":"California eligibility","status":"check","detail":"No exact California approval was verified. Obtain documentation for the exact US hybrid application."},{"label":"Availability and installation scope","status":"quote","detail":"SLEE currently lists out of stock. Quote tank draining/removal, pump/sender transfer, mounting and leak/gauge checks. Verify OEM tank capacity and any retained skid/aux-tank compatibility."},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."}],"available":false,"offers":[{"seller":"SLEE · listed out of stock","price":1995,"url":"https://sleeoffroad.com/products/fk-lc250-main-tank/"}],"installVideos":[{"url":"https://www.youtube.com/embed/RVROBsOSBr8","title":"FK LC250 main-tank installation reference","creator":"FK OFF-ROAD product library","scope":"Manufacturer-linked LC250 main tank · revision confirmation required","note":"Linked by the FK 110L main-tank product page. Confirm correspondence to the SLEE SKU and current instructions. Full playback not independently verified.","source":"https://fkoffroad.com/products/fk-notvuch-110l-29-gallon-main-fuel-tank-fit-for-lc250"}],"label":"SLEE listed 29-gallon LC250 replacement system","choice":null,"url":"/products/fk-29-gallon-replacement-main-tank","priceAmount":1995,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"SLEE LC250 2024–2027 application; confirm exact US hybrid/VIN and revision","installHours":[4,5],"installBasis":"tank mounting, filler/transfer plumbing, protected pump wiring and leak/function checks, or pack mounting to an existing rated surface. Read the exact product scope; container-only setup excludes mount work.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Replacement main tank, brackets and hardware per SLEE; reuses factory fuel pump, sender and fill tube."},{"label":"Loaded fuel and spring planning","status":"check","detail":"11.1 US gal adds approximately 66.6 lb of gasoline at full capacity, before dry tank/container and mounting weight. Review full and empty load cases; do not choose constant-load springs solely for occasionally carried fuel.","page":"suspension"},{"label":"Product revision and weight conflict","status":"conflict","detail":"SLEE lists 81 lb and 4–5 hours; FK 110L page lists 24 kg and 2–3 hours. Confirm exact kit revision and installed net weight before purchase."},{"label":"California eligibility","status":"check","detail":"No exact California approval was verified. Obtain documentation for the exact US hybrid application."},{"label":"Availability and installation scope","status":"quote","detail":"SLEE currently lists out of stock. Quote tank draining/removal, pump/sender transfer, mounting and leak/gauge checks. Verify OEM tank capacity and any retained skid/aux-tank compatibility."},{"label":"Combining main and auxiliary tanks","status":"check","detail":"Do not assume a replacement main tank works with a separate auxiliary system. Confirm filler, transfer, EVAP, skid and mounting compatibility as one complete system."},{"label":"Installation / compatibility notes","status":"check","detail":"SLEE lists this option out of stock at $1,995, 4–5 installation hours and 81 lb item weight. FK’s 110L page instead lists 24 kg and 2–3 hours; exact revision equivalence is unconfirmed, so dry weight stays pending and prices are not combined as identical offers. Added gasoline is calculated above a 17.9-gallon stock baseline, not all 29 gallons. Manufacturer fitment-year wording also needs exact VIN confirmation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"url":"https://www.youtube.com/embed/RVROBsOSBr8","title":"FK LC250 main-tank installation reference","creator":"FK OFF-ROAD product library","scope":"Manufacturer-linked LC250 main tank · revision confirmation required","note":"Linked by the FK 110L main-tank product page. Confirm correspondence to the SLEE SKU and current instructions. Full playback not independently verified.","source":"https://fkoffroad.com/products/fk-notvuch-110l-29-gallon-main-fuel-tank-fit-for-lc250","manufacturerLinked":true,"checked":"2026-10-25"}],"reviews":[{"id":"fk-main-install","productIds":["acc-fuel-fk-main"],"author":"doubleD","date":"2025-11-15","source":"https://www.landcruiserforum.com/threads/29gal-main-fuel-tank-install.7587/","sourceName":"Owner forum report","kind":"owner","scope":"FK 110 L family; equivalence to SLEE revision unconfirmed","context":"US LC250; directly purchased FK 110 L main tank","summary":"Reports a successful LC250 installation, good packaging and finish; notes tight working space and incomplete written instructions.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"acc-dissent-front","slug":"dissent-modular-front-winch-bumper","path":"/products/dissent-modular-front-winch-bumper","name":"Dissent modular front winch bumper","brand":"DISSENT OFF-ROAD","brandPath":"/brands/dissent-off-road","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-dissent-front","cat":"bumpers","subcat":"Bumpers","name":"Dissent modular front winch bumper","brand":"DISSENT OFF-ROAD","sku":"DS-LC250-MFB-251","price":1699,"source":"https://dissentoffroad.com/products/lc250-modular-front-winch-bumper","variant":"Listed base configuration","slot":"bumper","modelId":"bumper","desc":"Full-front steel alternative for a more demanding trail build.","specs":"120 lb product weight · 10-gauge shell · 30-inch single-row light pocket.","includes":"Bumper, mounting hardware and tie-in skid; winch, lights and wiring extra.","explain":"Front cross-traffic sensor relocation required. Verify winch/control-box dimensions and fused rear-battery wiring before ordering.","hmin":6,"hmax":10,"gross":120,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"bumper","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Front cross-traffic sensor relocation required. Verify winch/control-box dimensions and fused rear-battery wiring before ordering.","page":"bumpers"}],"offers":[{"seller":"DISSENT OFF-ROAD","price":1699,"url":"https://dissentoffroad.com/products/lc250-modular-front-winch-bumper"}],"mountArea":"front","image":"acc-dissent-front","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose for full-front protection; budget sensor relocation, wiring and front spring review.","label":"Listed base configuration","choice":null,"url":"/products/dissent-modular-front-winch-bumper","priceAmount":1699,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[6,10],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Bumper, mounting hardware and tie-in skid; winch, lights and wiring extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Front cross-traffic sensor relocation required. Verify winch/control-box dimensions and fused rear-battery wiring before ordering.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"Front cross-traffic sensor relocation required. Verify winch/control-box dimensions and fused rear-battery wiring before ordering."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-dissent-front-sensor","productIds":["acc-dissent-front"],"type":"guide","title":"Dissent LC250 front sensor-mount supplement","url":"https://cdn.shopify.com/s/files/1/0574/0534/1892/files/Dissent_Offroad_LLC_LC250-GX550_sensor_Installation_guide.pdf?v=1785948665","publisher":"Dissent Off-road","scope":"Sensor-mount subtask only","note":"One-page supplement, not a complete bumper installation guide.","match":"component","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0574/0534/1892/files/Dissent_Offroad_LLC_LC250-GX550_sensor_Installation_guide.pdf?v=1785948665"}],"videos":[{"id":"expand-dissent-front-video","productIds":["acc-dissent-front"],"type":"video","title":"LC250 Dissent front bumper installation","url":"https://www.youtube.com/watch?v=bJfXSeLlh2A","publisher":"Dissent Off-road","scope":"LC250 front bumper","note":"Manufacturer installation reference; exact sensor and winch configuration still needs review.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://dissentoffroad.com/pages/install","creator":"Dissent Off-road"}],"reviews":[],"clearance":null}]},{"id":"acc-dissent-rear","slug":"dissent-modular-rear-bumper","path":"/products/dissent-modular-rear-bumper","name":"Dissent modular rear bumper","brand":"DISSENT OFF-ROAD","brandPath":"/brands/dissent-off-road","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-dissent-rear","cat":"bumpers","subcat":"Rear bumpers","name":"Dissent modular rear bumper","brand":"DISSENT OFF-ROAD","sku":"DS-LC250-MRB-NOCM-257","price":1999,"source":"https://dissentoffroad.com/products/lc250-modular-rear-bumper","variant":"No camera relocation · no swing-outs","slot":"rear-bumper","modelId":"gear","desc":"Rear protection with separately purchased swing-out capability.","specs":"140 lb bumper · base configuration has no camera relocation.","includes":"Rear bumper and listed mounting hardware. Swing arms, carriers, lights and camera relocation extra.","explain":"Kick sensor must be removed. If adding a swing-out, confirm grade-specific analog/digital camera relocation and total rear load; carrier not included.","hmin":6,"hmax":10,"gross":140,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Kick sensor must be removed. If adding a swing-out, confirm grade-specific analog/digital camera relocation and total rear load; carrier not included.","page":"bumpers"}],"offers":[{"seller":"DISSENT OFF-ROAD","price":1999,"url":"https://dissentoffroad.com/products/lc250-modular-rear-bumper"}],"mountArea":"rear","image":"acc-dissent-rear","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose if you need a bumper-based carrier system; price the complete carrier and camera plan together.","label":"No camera relocation · no swing-outs","choice":null,"url":"/products/dissent-modular-rear-bumper","priceAmount":1999,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[6,10],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Rear bumper and listed mounting hardware. Swing arms, carriers, lights and camera relocation extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Kick sensor must be removed. If adding a swing-out, confirm grade-specific analog/digital camera relocation and total rear load; carrier not included.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"Kick sensor must be removed. If adding a swing-out, confirm grade-specific analog/digital camera relocation and total rear load; carrier not included."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"expand-dissent-rear-video","productIds":["acc-dissent-rear"],"type":"video","title":"Dissent GX550 / LC250 rear bumper install guide","url":"https://www.youtube.com/watch?v=tNwySABO0II","publisher":"Dissent Off-road","scope":"GX550 example linked for LC250 by manufacturer","note":"GX550 demonstration; LC250-specific sensor, camera and trim differences require the current guide. Linked by the manufacturer; uploader identity has not been independently confirmed.","match":"family","official":false,"purpose":"installation","checked":"2026-10-25","source":"https://dissentoffroad.com/pages/install","manufacturerLinked":true,"creator":"Dissent Off-road"}],"reviews":[],"clearance":null}]},{"id":"acc-dissent-sliders","slug":"dissent-lc250-step-sliders","path":"/products/dissent-lc250-step-sliders","name":"Dissent LC250 step sliders","brand":"DISSENT OFF-ROAD","brandPath":"/brands/dissent-off-road","category":"steps","categorySlug":"steps-and-rock-sliders","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-dissent-sliders","cat":"steps","subcat":"Rock sliders","name":"Dissent LC250 step sliders","brand":"DISSENT OFF-ROAD","sku":"DS-LC250-SLDR-252","price":1975,"source":"https://dissentoffroad.com/products/lc250-step-sliders","variant":"Listed base configuration","slot":"side","modelId":"sliders","desc":"Frame-mounted protection with a usable step surface.","specs":"140 lb pair · steel construction · four frame brackets per side.","includes":"Left and right sliders with listed mounting hardware.","explain":"Confirm factory-step removal and current bracket orientation. Verify frame clearances and torque with the exact LC250 guide.","hmin":3,"hmax":5,"gross":140,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"sliders","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm factory-step removal and current bracket orientation. Verify frame clearances and torque with the exact LC250 guide.","page":"steps"}],"offers":[{"seller":"DISSENT OFF-ROAD","price":1975,"url":"https://dissentoffroad.com/products/lc250-step-sliders"}],"image":"acc-dissent-sliders","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose for rock protection plus access; compare total pair weight against lighter step-only products.","label":"Listed base configuration","choice":null,"url":"/products/dissent-lc250-step-sliders","priceAmount":1975,"priceBasis":"selected pair / package","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[3,5],"installBasis":"factory-step removal as needed, mounting brackets, fastening and clearance checks.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Left and right sliders with listed mounting hardware."},{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm factory-step removal and current bracket orientation. Verify frame clearances and torque with the exact LC250 guide.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm factory-step removal and current bracket orientation. Verify frame clearances and torque with the exact LC250 guide."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-dissent-slider-guide","productIds":["acc-dissent-sliders"],"type":"manual","title":"Dissent LC250/GX550 step-slider guide","url":"https://cdn.shopify.com/s/files/1/0574/0534/1892/files/Dissent_Offroad_LLC_LC250_-_GX550_Rock_Slider_Steps_Installation_guide.pdf?v=1763661609","publisher":"Dissent Off-road","scope":"LC250 / GX550 step sliders","note":"Exact bracket orientation and vehicle-specific steps must follow the current guide.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0574/0534/1892/files/Dissent_Offroad_LLC_LC250_-_GX550_Rock_Slider_Steps_Installation_guide.pdf?v=1763661609"}],"videos":[{"id":"expand-dissent-slider-video","productIds":["acc-dissent-sliders"],"type":"video","title":"LC250 Dissent step-slider installation overview","url":"https://www.youtube.com/watch?v=GIOdxYGazNU","publisher":"Dissent Off-road","scope":"LC250 step sliders","note":"Manufacturer installation overview; use the written guide for current fasteners and torque. Linked by the manufacturer; uploader identity has not been independently confirmed.","match":"exact","official":false,"purpose":"installation","checked":"2026-10-25","source":"https://dissentoffroad.com/pages/install","manufacturerLinked":true,"creator":"Dissent Off-road"}],"reviews":[],"clearance":null}]},{"id":"acc-sdhq-power","slug":"sdhq-underhood-power-solution","path":"/products/sdhq-underhood-power-solution","name":"SDHQ underhood power solution","brand":"SDHQ","brandPath":"/brands/sdhq","category":"power","categorySlug":"power-and-electrical","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-sdhq-power","cat":"power","subcat":"Distribution & switching","name":"SDHQ underhood power solution","brand":"SDHQ","sku":"SDHQ-50-3041-U1","price":1254.65,"source":"https://sdhqoffroad.com/products/24-lc250-sdhq-built-power-solutions-kit","variant":"Listed base configuration","slot":"distribution","modelId":"gear","desc":"Remote 12V connection points without an included switching controller.","specs":"1/0 cable · fused supply · mounts support Garmin or Switch-Pros modules.","includes":"Remote terminals, boots, cable, pass-through and kit hardware; controller and accessory circuits extra.","explain":"Installer must verify the hybrid 12V supply, pass-through drilling, cable protection and load limits. Controller-ready does not mean a controller is included.","hmin":2,"hmax":3,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Installer must verify the hybrid 12V supply, pass-through drilling, cable protection and load limits. Controller-ready does not mean a controller is included.","page":"power"}],"offers":[{"seller":"SDHQ","price":1254.65,"url":"https://sdhqoffroad.com/products/24-lc250-sdhq-built-power-solutions-kit"}],"image":"acc-sdhq-power","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","manufacturerHours":true,"laborPublisher":"SDHQ","laborSource":"https://sdhqoffroad.com/products/24-lc250-sdhq-built-power-solutions-kit","laborNote":"Published 2–3 hours excludes accessory wiring.","recommendation":"Choose when you want to select a separate switching controller; accessory wiring is additional.","label":"Listed base configuration","choice":null,"url":"/products/sdhq-underhood-power-solution","priceAmount":1254.65,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[2,3],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Remote terminals, boots, cable, pass-through and kit hardware; controller and accessory circuits extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Installer must verify the hybrid 12V supply, pass-through drilling, cable protection and load limits. Controller-ready does not mean a controller is included.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Installer must verify the hybrid 12V supply, pass-through drilling, cable protection and load limits. Controller-ready does not mean a controller is included."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-sdhq-manual","productIds":["acc-sdhq-power"],"type":"manual","title":"SDHQ LC250 underhood power solution installation","url":"https://cdn.shopify.com/s/files/1/2493/2184/files/50-3041-U1_Install_Instructions_68ace802-802c-4b7e-87a1-c707dca18792.pdf?v=1762278921","publisher":"SDHQ","scope":"LC250 / SDHQ-50-3041-U1","note":"Exact kit manual; accessory wiring remains a separate job.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/2493/2184/files/50-3041-U1_Install_Instructions_68ace802-802c-4b7e-87a1-c707dca18792.pdf?v=1762278921"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-victory-power","slug":"victory-lc250-power-distribution","path":"/products/victory-lc250-power-distribution","name":"Victory LC250 power distribution","brand":"VICTORY 4X4","brandPath":"/brands/victory-4x4","category":"power","categorySlug":"power-and-electrical","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-victory-power","cat":"power","subcat":"Distribution & switching","name":"Victory LC250 power distribution","brand":"VICTORY 4X4","sku":"V250PDR","price":599,"source":"https://www.victory4x4.com/product/V250PDR.html","variant":"Listed base configuration","slot":"distribution","modelId":"gear","desc":"Lower-cost distribution alternative; electronic switching is separate.","specs":"6 lb product · 2 AWG copper supply · eight-stud bus bar · supplied MEGA fuse.","includes":"Bracket, power wiring, bus bar, fuse holder and listed hardware. No electronic switching controller.","explain":"Follow the current cable-routing/protection instructions. Have an installer validate circuit protection and hybrid 12V current budget for the actual accessories.","hmin":4,"hmax":7,"gross":6,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Follow the current cable-routing/protection instructions. Have an installer validate circuit protection and hybrid 12V current budget for the actual accessories.","page":"power"}],"offers":[{"seller":"VICTORY 4X4","price":599,"url":"https://www.victory4x4.com/product/V250PDR.html"}],"recommendation":"Choose for basic underhood power access; add switching only if your circuit plan needs it.","label":"Listed base configuration","choice":null,"url":"/products/victory-lc250-power-distribution","priceAmount":599,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[4,7],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Bracket, power wiring, bus bar, fuse holder and listed hardware. No electronic switching controller."},{"label":"Exact fitment and supporting work","status":"check","detail":"Follow the current cable-routing/protection instructions. Have an installer validate circuit protection and hybrid 12V current budget for the actual accessories.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Follow the current cable-routing/protection instructions. Have an installer validate circuit protection and hybrid 12V current budget for the actual accessories."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-victory-power","productIds":["acc-victory-power"],"type":"manual","title":"Victory LC250 power distribution guide","url":"https://gembadocs.com/stdop/pdf/dfe1169fd-54bb4c19b705-1761239535?view_type=pdf","publisher":"Victory 4x4","scope":"Manufacturer-linked power relocation instructions","note":"Confirm supplied bracket and hardware revisions.","match":"component","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://gembadocs.com/stdop/pdf/dfe1169fd-54bb4c19b705-1761239535?view_type=pdf"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-victory-molle","slug":"victory-rear-window-edc-molle-panel","path":"/products/victory-rear-window-edc-molle-panel","name":"Victory rear-window EDC MOLLE panel","brand":"VICTORY 4X4","brandPath":"/brands/victory-4x4","category":"cargo","categorySlug":"interior-and-cargo","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-victory-molle","cat":"cargo","subcat":"Interior storage","name":"Victory rear-window EDC MOLLE panel","brand":"VICTORY 4X4","sku":"VLC250-RMP","price":224,"source":"https://www.victory4x4.com/product/VLC250-RMP.html","variant":"One panel · satin black","slot":"molle","modelId":"gear","desc":"Single-panel alternative to paired cargo-window systems.","specs":"One panel · 1/8-inch steel · no-drill mounting.","includes":"One panel and mounting hardware; carried pouches and gear extra.","explain":"Sold individually, not a pair. Confirm side and attached-gear load. Preserve curtain-airbag deployment space; manufacturer cautions against use with third-row passengers where equipped.","hmin":1,"hmax":2,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Sold individually, not a pair. Confirm side and attached-gear load. Preserve curtain-airbag deployment space; manufacturer cautions against use with third-row passengers where equipped.","page":"cargo"}],"offers":[{"seller":"VICTORY 4X4","price":224,"url":"https://www.victory4x4.com/product/VLC250-RMP.html"}],"recommendation":"Choose for compact cargo organization without taking floor space; this price covers one panel.","label":"One panel · satin black","choice":null,"url":"/products/victory-rear-window-edc-molle-panel","priceAmount":224,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[1,2],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"One panel and mounting hardware; carried pouches and gear extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Sold individually, not a pair. Confirm side and attached-gear load. Preserve curtain-airbag deployment space; manufacturer cautions against use with third-row passengers where equipped.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Sold individually, not a pair. Confirm side and attached-gear load. Preserve curtain-airbag deployment space; manufacturer cautions against use with third-row passengers where equipped."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-victory-molle","productIds":["acc-victory-molle"],"type":"manual","title":"LC250 rear-window MOLLE instructions","url":"https://gembadocs.com/stdop/pdf/178b18ab5-b15e405fa709-1745583807?view_type=pdf","publisher":"Victory 4x4","scope":"VLC250-RMP mounting guide","note":"Confirm side and occupant/airbag clearances.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://gembadocs.com/stdop/pdf/178b18ab5-b15e405fa709-1745583807?view_type=pdf"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-victory-shelf","slug":"victory-lc250-upper-cargo-shelf","path":"/products/victory-lc250-upper-cargo-shelf","name":"Victory LC250 upper cargo shelf","brand":"VICTORY 4X4","brandPath":"/brands/victory-4x4","category":"cargo","categorySlug":"interior-and-cargo","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-victory-shelf","cat":"cargo","subcat":"Interior storage","name":"Victory LC250 upper cargo shelf","brand":"VICTORY 4X4","sku":"VLC250-UPRS","price":399,"source":"https://www.victory4x4.com/product/VLC250-UPRS.html","variant":"Listed base configuration","slot":"upper-shelf","modelId":"gear","desc":"Overhead soft-gear storage as an alternative to a heavy drawer build.","specs":"20 lb product · 41 × 16-inch shelf · fixed roughly 6 inches below roof.","includes":"Shelf and listed mounting hardware; MOLLE side panels are not required.","explain":"Check rear visibility, occupant/airbag clearance and secure all stored gear. Manufacturer cautions against third-row passenger use where equipped.","hmin":1.5,"hmax":3,"gross":20,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Check rear visibility, occupant/airbag clearance and secure all stored gear. Manufacturer cautions against third-row passenger use where equipped.","page":"cargo"}],"offers":[{"seller":"VICTORY 4X4","price":399,"url":"https://www.victory4x4.com/product/VLC250-UPRS.html"}],"mountArea":"rear","recommendation":"Choose for lightweight, bulky items; preserve headroom and restrain cargo.","label":"Listed base configuration","choice":null,"url":"/products/victory-lc250-upper-cargo-shelf","priceAmount":399,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[1.5,3],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Shelf and listed mounting hardware; MOLLE side panels are not required."},{"label":"Exact fitment and supporting work","status":"check","detail":"Check rear visibility, occupant/airbag clearance and secure all stored gear. Manufacturer cautions against third-row passenger use where equipped.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Check rear visibility, occupant/airbag clearance and secure all stored gear. Manufacturer cautions against third-row passenger use where equipped."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-victory-shelf","productIds":["acc-victory-shelf"],"type":"manual","title":"LC250 upper shelf instructions","url":"https://gembadocs.com/stdop/pdf/4182185af-39f544ec8c85-1745586240?view_type=pdf","publisher":"Victory 4x4","scope":"VLC250-UPRS mounting guide","note":"Confirm current fasteners and secured cargo limits.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://gembadocs.com/stdop/pdf/4182185af-39f544ec8c85-1745586240?view_type=pdf"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-victory-platform","slug":"victory-factory-rail-platform","path":"/products/victory-factory-rail-platform","name":"Victory factory-rail platform","brand":"VICTORY 4X4","brandPath":"/brands/victory-4x4","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-victory-platform","cat":"roof","subcat":"Roof racks","name":"Victory factory-rail platform","brand":"VICTORY 4X4","sku":"VLCRKCS-250","price":599,"source":"https://www.victory4x4.com/product/VLCRKCS-250.html","variant":"Listed base configuration","slot":"rack","modelId":"rack","desc":"Compact platform for owners retaining compatible factory rails.","specs":"45.25 × 42.5-inch platform · 150 lb dynamic / 600 lb static rack ratings.","includes":"Platform and listed mounting hardware. Requires compatible original rails.","explain":"Verify existing factory rails and vehicle roof limits; rack ratings do not raise Toyota limits. Page lists 40 lb in header and 41 lb in specs; exact weight needs confirmation.","hmin":1.5,"hmax":3,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[{"label":"Compatible factory roof rails","slots":["factory-roof-rails"],"note":"Verify that your vehicle has the factory rails specified by Victory. An aftermarket full rack is not a substitute.","page":"roof"}],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Verify existing factory rails and vehicle roof limits; rack ratings do not raise Toyota limits. Page lists 40 lb in header and 41 lb in specs; exact weight needs confirmation.","page":"roof"}],"offers":[{"seller":"VICTORY 4X4","price":599,"url":"https://www.victory4x4.com/product/VLCRKCS-250.html"}],"recommendation":"Choose for compact roof cargo while retaining factory rails; check tent mounting separately.","label":"Listed base configuration","choice":null,"url":"/products/victory-factory-rail-platform","priceAmount":599,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[1.5,3],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Platform and listed mounting hardware. Requires compatible original rails."},{"label":"Compatible factory roof rails","status":"check","detail":"Verify that your vehicle has the factory rails specified by Victory. An aftermarket full rack is not a substitute.","page":"roof"},{"label":"Exact fitment and supporting work","status":"check","detail":"Verify existing factory rails and vehicle roof limits; rack ratings do not raise Toyota limits. Page lists 40 lb in header and 41 lb in specs; exact weight needs confirmation.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Verify existing factory rails and vehicle roof limits; rack ratings do not raise Toyota limits. Page lists 40 lb in header and 41 lb in specs; exact weight needs confirmation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-victory-platform","productIds":["acc-victory-platform"],"type":"manual","title":"LC250 factory-rail platform guide","url":"https://gembadocs.com/stdop/pdf/c48b17d15-a55c418980ba-1788899336?view_type=pdf","publisher":"Victory 4x4","scope":"VLCRKCS-250 platform instructions","note":"Requires the specified original rails; this is not a full replacement-rack guide.","match":"exact","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://gembadocs.com/stdop/pdf/c48b17d15-a55c418980ba-1788899336?view_type=pdf"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-prinsu-pro","slug":"prinsu-pro-lc250-roof-rack","path":"/products/prinsu-pro-lc250-roof-rack","name":"Prinsu Pro LC250 roof rack","brand":"PRINSU","brandPath":"/brands/prinsu","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-prinsu-pro","cat":"roof","subcat":"Roof racks","name":"Prinsu Pro LC250 roof rack","brand":"PRINSU","sku":"Exact variant SKU pending","price":1480,"source":"https://prinsu.com/product/prinsu-pro-landcruiser-roof-rack-2024/","variant":"Standard wind deflector · no light bar","slot":"rack","modelId":"rack","desc":"Full-length aluminum alternative with no-drill mounting.","specs":"Aluminum construction · drop-in crossbar attachment points · mounting feet and stainless hardware.","includes":"Rack and mounting hardware; light bar and accessory mounts extra.","explain":"Confirm standard wind deflector and supplied hardware. Use the lower applicable vehicle/roof/mount rating; advertised rack capacity is not allowable vehicle roof load.","hmin":3,"hmax":5,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm standard wind deflector and supplied hardware. Use the lower applicable vehicle/roof/mount rating; advertised rack capacity is not allowable vehicle roof load.","page":"roof"}],"offers":[{"seller":"PRINSU","price":1480,"url":"https://prinsu.com/product/prinsu-pro-landcruiser-roof-rack-2024/"}],"image":"acc-prinsu-pro","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose for a modular full-length rack; compare weight, height and actual roof limits before adding a tent.","priceNote":"Manufacturer-listed rack price; confirm the standard wind-deflector configuration before ordering.","label":"Standard wind deflector · no light bar","choice":null,"url":"/products/prinsu-pro-lc250-roof-rack","priceAmount":1480,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[3,5],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Rack and mounting hardware; light bar and accessory mounts extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm standard wind deflector and supplied hardware. Use the lower applicable vehicle/roof/mount rating; advertised rack capacity is not allowable vehicle roof load.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm standard wind deflector and supplied hardware. Use the lower applicable vehicle/roof/mount rating; advertised rack capacity is not allowable vehicle roof load."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"expand-prinsu-video","productIds":["acc-prinsu-pro"],"type":"video","title":"Prinsu Pro roof-rack install on a 2024+ Land Cruiser","url":"https://www.youtube.com/watch?v=_Sg0CeBiHCg","publisher":"YoAdrianTRD","scope":"LC250 Prinsu Pro owner installation","note":"Independent installation example; confirm current manufacturer instructions and part revisions.","match":"exact","official":false,"purpose":"installation","checked":"2026-10-25","source":"https://www.youtube.com/watch?v=_Sg0CeBiHCg","creator":"YoAdrianTRD"}],"reviews":[],"clearance":null}]},{"id":"acc-goose-plate","slug":"goose-gear-lc250-rear-plate","path":"/products/goose-gear-lc250-rear-plate","name":"Goose Gear LC250 rear plate","brand":"GOOSE GEAR","brandPath":"/brands/goose-gear","category":"cargo","categorySlug":"interior-and-cargo","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-goose-plate","cat":"cargo","subcat":"Cargo platforms","name":"Goose Gear LC250 rear plate","brand":"GOOSE GEAR","sku":"1011-GGR-SH","price":1495,"source":"https://www.goose-gear.com/collections/toyota-land-cruiser-250-series-2024-present/products/toyota-land-cruiser-2024-present-lc250-explore-series-rear-plate-system","variant":"Rear plate only · listed shipping configuration","slot":"cargo-platform","modelId":"gear","desc":"Modular foundation for storage instead of a complete drawer system.","specs":"Eight-piece rear plate · existing threaded inserts · battery and jack access.","includes":"Rear plate and listed fasteners; drawers and refrigerators extra.","explain":"Replaces factory cargo trim. Verify module compatibility by exact SKU; the separate fridge-module page references a conflicting plate number, so automatic compatibility is not assumed.","hmin":2,"hmax":4,"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"gear","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Replaces factory cargo trim. Verify module compatibility by exact SKU; the separate fridge-module page references a conflicting plate number, so automatic compatibility is not assumed.","page":"cargo"}],"offers":[{"seller":"GOOSE GEAR","price":1495,"url":"https://www.goose-gear.com/collections/toyota-land-cruiser-250-series-2024-present/products/toyota-land-cruiser-2024-present-lc250-explore-series-rear-plate-system"}],"mountArea":"rear","image":"acc-goose-plate","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose when building a modular cargo system; price compatible modules separately.","label":"Rear plate only · listed shipping configuration","choice":null,"url":"/products/goose-gear-lc250-rear-plate","priceAmount":1495,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[2,4],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Rear plate and listed fasteners; drawers and refrigerators extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Replaces factory cargo trim. Verify module compatibility by exact SKU; the separate fridge-module page references a conflicting plate number, so automatic compatibility is not assumed.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Replaces factory cargo trim. Verify module compatibility by exact SKU; the separate fridge-module page references a conflicting plate number, so automatic compatibility is not assumed."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-goose-support","productIds":["acc-goose-plate"],"type":"reference","title":"Goose Gear installation support","url":"https://www.goose-gear.com/collections/toyota-land-cruiser-250-series-2024-present/products/toyota-land-cruiser-2024-present-lc250-explore-series-rear-plate-system","publisher":"Goose Gear","scope":"Manufacturer installation library","note":"Exact rear-plate guide not retrieved; request the manual for 1011-GGR-SH before installation.","match":"exact","official":true,"purpose":"support","checked":"2026-10-25","source":"https://www.goose-gear.com/collections/toyota-land-cruiser-250-series-2024-present/products/toyota-land-cruiser-2024-present-lc250-explore-series-rear-plate-system"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-dometic45","slug":"dometic-cfx5-45-fridge-freezer","path":"/products/dometic-cfx5-45-fridge-freezer","name":"Dometic CFX5 45 fridge/freezer","brand":"DOMETIC","brandPath":"/brands/dometic","category":"cargo","categorySlug":"interior-and-cargo","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-dometic45","cat":"cargo","subcat":"Fridges & slides","name":"Dometic CFX5 45 fridge/freezer","brand":"DOMETIC","sku":"97000050755","price":1049.99,"source":"https://www.dometic.com/en-us/product/cfx5-45-electric-cooler-97000050755","variant":"Listed base configuration","slot":"fridge","modelId":"fridge","desc":"Larger single-zone portable alternative to the ICECO APL35.","specs":"27.32 × 15.67 × 18.74 inches · 40.26 lb empty · 12/24V DC or AC.","includes":"Cooler and AC/DC cables; slide, anchors, food and vehicle power circuit extra.","explain":"Universal equipment, not a vehicle-specific mounting kit. Measure cargo/slide footprint, lid clearance, ventilation and secured power supply.","hmin":1,"hmax":2,"gross":40.26,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"fridge","checked":"October 25, 2026 (Pacific)","fitment":"Universal portable fridge; LC250 anchoring, clearance and power must be verified.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Universal equipment, not a vehicle-specific mounting kit. Measure cargo/slide footprint, lid clearance, ventilation and secured power supply.","page":"cargo"}],"offers":[{"seller":"DOMETIC","price":1049.99,"url":"https://www.dometic.com/en-us/product/cfx5-45-electric-cooler-97000050755"}],"mountArea":"rear","recommendation":"Choose for more cold-storage space; compare loaded mass and lid access with your cargo layout.","label":"Listed base configuration","choice":null,"url":"/products/dometic-cfx5-45-fridge-freezer","priceAmount":1049.99,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal portable fridge; LC250 anchoring, clearance and power must be verified.","installHours":[1,2],"installBasis":"assembly where applicable, anchoring and service-access / loaded-clearance review. Fridge and slide work must be coordinated.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Cooler and AC/DC cables; slide, anchors, food and vehicle power circuit extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Universal equipment, not a vehicle-specific mounting kit. Measure cargo/slide footprint, lid clearance, ventilation and secured power supply.","page":"cargo"},{"label":"Installation / compatibility notes","status":"check","detail":"Universal equipment, not a vehicle-specific mounting kit. Measure cargo/slide footprint, lid clearance, ventilation and secured power supply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-dometic-manual","productIds":["acc-dometic45"],"type":"manual","title":"Dometic CFX5 operating manual","url":"https://media.dometic.com/externalassets/dometic-cfx5-35_97000050754_117548.pdf","publisher":"Dometic","scope":"CFX5 family setup / operation","note":"Covers cooler setup and operation; not an LC250 tie-down, slide or vehicle-circuit installation.","match":"family","official":true,"purpose":"setup","checked":"2026-10-25","source":"https://media.dometic.com/externalassets/dometic-cfx5-35_97000050754_117548.pdf"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-viair450","slug":"viair-450p-automatic-compressor","path":"/products/viair-450p-automatic-compressor","name":"VIAIR 450P Automatic compressor","brand":"VIAIR","brandPath":"/brands/viair","category":"air","categorySlug":"onboard-air","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-viair450","cat":"air","subcat":"Portable compressors","name":"VIAIR 450P Automatic compressor","brand":"VIAIR","sku":"45043","price":404.95,"source":"https://viaircorp.com/products/450p-auto-portable","variant":"Silver · PN 45043","slot":"air","modelId":"air","desc":"Portable alternative that avoids a permanent underhood installation.","specs":"12V · 1.80 CFM at 0 psi · 100% duty at 100 psi · 13.05 lb listed unit.","includes":"Silver compressor, hose, inflation gun, tips and carry bag.","explain":"Use manufacturer-approved battery connection points and operating procedure. Confirm hybrid 12V supply suitability; never power from an undersized accessory socket. Secure it when carried.","hmin":0,"hmax":0,"gross":13.05,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"air","checked":"October 25, 2026 (Pacific)","fitment":"Universal portable compressor; verify LC250 12V connection procedure.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Use manufacturer-approved battery connection points and operating procedure. Confirm hybrid 12V supply suitability; never power from an undersized accessory socket. Secure it when carried.","page":"air"}],"offers":[{"seller":"VIAIR","price":404.95,"url":"https://viaircorp.com/products/450p-auto-portable"}],"mountArea":"rear","image":"acc-viair450","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","laborScope":"Portable use: no permanent installation included. Hard mounting or vehicle wiring requires a separate quote.","recommendation":"Choose for occasional tire inflation and portability; compare flow at operating pressure, not only zero-psi CFM.","manufacturerHours":false,"label":"Silver · PN 45043","choice":null,"url":"/products/viair-450p-automatic-compressor","priceAmount":404.95,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal portable compressor; verify LC250 12V connection procedure.","installHours":[0,0],"installBasis":"Portable use: no permanent installation included. Hard mounting or vehicle wiring requires a separate quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Silver compressor, hose, inflation gun, tips and carry bag."},{"label":"Exact fitment and supporting work","status":"check","detail":"Use manufacturer-approved battery connection points and operating procedure. Confirm hybrid 12V supply suitability; never power from an undersized accessory socket. Secure it when carried.","page":"air"},{"label":"Installation / compatibility notes","status":"check","detail":"Use manufacturer-approved battery connection points and operating procedure. Confirm hybrid 12V supply suitability; never power from an undersized accessory socket. Secure it when carried."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"expand-viair-video","productIds":["acc-viair450"],"type":"video","title":"VIAIR 400P-RVS / 450P-RVS operating reference","url":"https://www.youtube.com/watch?v=kbeIyi0-FFw","publisher":"VIAIR Corporation","scope":"Related portable compressor models","note":"Operating reference for related RV models, not the exact 45043 kit or LC250 hybrid connection procedure.","match":"family","official":true,"purpose":"setup","checked":"2026-10-25","source":"https://www.youtube.com/watch?v=kbeIyi0-FFw","creator":"VIAIR Corporation"}],"reviews":[],"clearance":null}]},{"id":"acc-redarc-alpha25","slug":"redarc-bcdc-alpha25-charger","path":"/products/redarc-bcdc-alpha25-charger","name":"REDARC BCDC Alpha25 charger","brand":"REDARC","brandPath":"/brands/redarc","category":"power","categorySlug":"power-and-electrical","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-redarc-alpha25","cat":"power","subcat":"DC-DC charging","name":"REDARC BCDC Alpha25 charger","brand":"REDARC","sku":"BCDC12025B","price":689,"source":"https://www.redarcelectronics.com/us/bcdc-alpha25","variant":"Listed base configuration","slot":"dcdc","modelId":"dcdc","desc":"Auxiliary-battery charging alternative to a dedicated power-station charger.","specs":"25A 12V output · DC and solar input · IP67/69K · 32.6 oz charger.","includes":"Charger only; auxiliary battery, battery mount, fuses and wiring kit extra.","explain":"Universal charger; auto-electrician must verify LC250 hybrid 12V input limits, battery chemistry and charge settings. This is not a plug-in replacement for the Jackery charger.","hmin":4,"hmax":7,"gross":2.04,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"dcdc","checked":"October 25, 2026 (Pacific)","fitment":"Universal DC-DC charger; exact LC250 hybrid installation requires design confirmation.","deps":[{"label":"Compatible auxiliary battery and protected wiring","slots":["aux-battery"],"note":"A correctly sized and mounted auxiliary battery, fuses and cable plan are required. A portable power station is not automatically compatible.","page":"power"}],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Universal charger; auto-electrician must verify LC250 hybrid 12V input limits, battery chemistry and charge settings. This is not a plug-in replacement for the Jackery charger.","page":"power"}],"offers":[{"seller":"REDARC","price":689,"url":"https://www.redarcelectronics.com/us/bcdc-alpha25"}],"recommendation":"Choose for a designed auxiliary-battery system; do not add alongside another charger to the same battery without an approved plan.","label":"Listed base configuration","choice":null,"url":"/products/redarc-bcdc-alpha25-charger","priceAmount":689,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Universal DC-DC charger; exact LC250 hybrid installation requires design confirmation.","installHours":[4,7],"installBasis":"secure mounting, cable routing, protection, connections and functional checks appropriate to the exact device. Portable station setup does not include a vehicle charging circuit.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Charger only; auxiliary battery, battery mount, fuses and wiring kit extra."},{"label":"Compatible auxiliary battery and protected wiring","status":"check","detail":"A correctly sized and mounted auxiliary battery, fuses and cable plan are required. A portable power station is not automatically compatible.","page":"power"},{"label":"Exact fitment and supporting work","status":"check","detail":"Universal charger; auto-electrician must verify LC250 hybrid 12V input limits, battery chemistry and charge settings. This is not a plug-in replacement for the Jackery charger.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Universal charger; auto-electrician must verify LC250 hybrid 12V input limits, battery chemistry and charge settings. This is not a plug-in replacement for the Jackery charger."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-redarc-support","productIds":["acc-redarc-alpha25"],"type":"reference","title":"REDARC BCDC Alpha product downloads","url":"https://www.redarcelectronics.com/us/bcdc-alpha25","publisher":"REDARC","scope":"Official Alpha25 manual link on product page","note":"Direct manual URL could not be retrieved. Obtain the exact BCDC12025B manual; general BCDC videos are not treated as Alpha installation proof.","match":"exact","official":true,"purpose":"support","checked":"2026-10-25","source":"https://www.redarcelectronics.com/us/bcdc-alpha25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"c4-lc250","slug":"c4-lc250-lo-pro-winch-bumper","path":"/products/c4-lc250-lo-pro-winch-bumper","name":"C4 LC250 Lo-Pro winch bumper","brand":"C4 FABRICATION","brandPath":"/brands/c4-fabrication","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-c4-lopro","cat":"bumpers","subcat":"Bumpers","name":"C4 LC250 Lo-Pro winch bumper · Raw","brand":"C4 FABRICATION","sku":"1624-10100","price":749,"source":"https://c4fabrication.com/products/land-cruiser-front-lo-pro-winch-bumper-250-series-2024?variant=46585846333661","variant":"Raw","slot":"bumper","modelId":"hidden","desc":"Low-profile alternative with a documented factory-parts replacement weight.","specs":"45 lb bumper · manufacturer states 45 lb OEM removal · 20-inch light pocket.","includes":"Bumper and listed mounting hardware; winch, lighting, wiring and any coating service extra.","explain":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","hmin":5,"hmax":8,"gross":45,"weight":0,"weightVerified":true,"realAccessory":true,"icon":"▰","visual":"hidden","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","page":"bumpers"}],"offers":[{"seller":"C4 FABRICATION","price":749,"url":"https://c4fabrication.com/products/land-cruiser-front-lo-pro-winch-bumper-250-series-2024?variant=46585846333661"}],"mountArea":"front","image":"acc-c4-lopro","imageNote":"Manufacturer reference photo; optional equipment pictured is not necessarily included.","recommendation":"Choose for a lighter front recovery mount; finish and wiring costs must be included.","available":true,"weightBasis":"Manufacturer: 45 lb replacement bumper minus 45 lb removed original parts, before optional equipment.","label":"Raw steel · coating required","choice":null,"url":"/products/c4-lc250-lo-pro-winch-bumper?variant=acc-c4-lopro","priceAmount":749,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[5,8],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Bumper and listed mounting hardware; winch, lighting, wiring and any coating service extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional."}],"documents":[{"id":"expand-c4-manual","productIds":["acc-c4-lopro","acc-c4-lopro-alternate"],"type":"manual","title":"C4 LC250 Lo-Pro bumper installation","url":"https://cdn.shopify.com/s/files/1/0351/6245/6195/files/2024_250_Series_Land_Cruiser_Lo-Pro_Install_Instructions.pdf?v=1733717696","publisher":"C4 Fabrication","scope":"LC250 Lo-Pro bumper family / finish variants","note":"Use the supplied revision; trim cutting and separate winch wiring need their own checks.","match":"family","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0351/6245/6195/files/2024_250_Series_Land_Cruiser_Lo-Pro_Install_Instructions.pdf?v=1733717696"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-c4-lopro-alternate","cat":"bumpers","subcat":"Bumpers","name":"C4 LC250 Lo-Pro winch bumper · Powder Coat","brand":"C4 FABRICATION","sku":"1624-10100-01NA","price":859,"source":"https://c4fabrication.com/products/land-cruiser-front-lo-pro-winch-bumper-250-series-2024?variant=46585846366429","variant":"Powder Coat","slot":"bumper","modelId":"hidden","desc":"Low-profile alternative with a documented factory-parts replacement weight.","specs":"45 lb bumper · manufacturer states 45 lb OEM removal · 20-inch light pocket.","includes":"Bumper and listed mounting hardware; winch, lighting, wiring and any coating service extra.","explain":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","hmin":5,"hmax":8,"gross":45,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"hidden","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","page":"bumpers"}],"offers":[{"seller":"C4 FABRICATION","price":859,"url":"https://c4fabrication.com/products/land-cruiser-front-lo-pro-winch-bumper-250-series-2024?variant=46585846366429"}],"mountArea":"front","recommendation":"Choose for a lighter front recovery mount; finish and wiring costs must be included.","available":true,"weightBasis":"Manufacturer states zero net gain for the base bumper; exact coated-variant net weight still needs confirmation.","image":"acc-c4-lopro","label":"Powder coated","choice":null,"url":"/products/c4-lc250-lo-pro-winch-bumper?variant=acc-c4-lopro-alternate","priceAmount":859,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[5,8],"installBasis":"mounting preparation, body/sensor review, bracket installation and final checks; winch wiring is a separate task.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Bumper and listed mounting hardware; winch, lighting, wiring and any coating service extra."},{"label":"Exact fitment and supporting work","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"Requires center bumper-cover cutting. Confirm hawse fairlead and control-box relocation. Raw steel needs coating before service; coating costs are additional."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-c4-manual","productIds":["acc-c4-lopro","acc-c4-lopro-alternate"],"type":"manual","title":"C4 LC250 Lo-Pro bumper installation","url":"https://cdn.shopify.com/s/files/1/0351/6245/6195/files/2024_250_Series_Land_Cruiser_Lo-Pro_Install_Instructions.pdf?v=1733717696","publisher":"C4 Fabrication","scope":"LC250 Lo-Pro bumper family / finish variants","note":"Use the supplied revision; trim cutting and separate winch wiring need their own checks.","match":"family","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0351/6245/6195/files/2024_250_Series_Land_Cruiser_Lo-Pro_Install_Instructions.pdf?v=1733717696"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sherpa-atlas","slug":"sherpa-atlas-lc250-roof-rack","path":"/products/sherpa-atlas-lc250-roof-rack","name":"Sherpa Atlas LC250 roof rack","brand":"SHERPA","brandPath":"/brands/sherpa","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-25","defaultIndex":0,"variants":[{"id":"acc-sherpa-atlas","cat":"roof","subcat":"Roof racks","name":"Sherpa Atlas roof rack · Half Height (For Single Row Light Bar)","brand":"SHERPA","sku":"147744","price":1659,"source":"https://sherpaec.com/products/atlas?variant=45852311224575","variant":"Half Height (For Single Row Light Bar)","slot":"rack","modelId":"rack","desc":"Full-length aluminum roof-rack alternative with rubber-sealed mounting.","specs":"Approximately 65 lb · 97.8 × 50.5 × 2.5 inches · nine crossbars.","includes":"Sideplates, nine crossbars, mounting brackets, rubber seals, fairing and assembly hardware.","explain":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","hmin":3,"hmax":5,"gross":65,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","page":"roof"}],"offers":[{"seller":"SHERPA","price":1659,"url":"https://sherpaec.com/products/atlas?variant=45852311224575"}],"recommendation":"Choose for a robust full-length platform; include rack weight in the roof-load budget.","available":true,"image":"acc-sherpa-atlas","label":"Half height · for single-row light bar","choice":null,"url":"/products/sherpa-atlas-lc250-roof-rack?variant=acc-sherpa-atlas","priceAmount":1659,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[3,5],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Sideplates, nine crossbars, mounting brackets, rubber seals, fairing and assembly hardware."},{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-atlas-manual","productIds":["acc-sherpa-atlas","acc-sherpa-atlas-alternate"],"type":"manual","title":"Sherpa Atlas rack installation guide","url":"https://cdn.shopify.com/s/files/1/0506/7377/8878/files/Atlas_Rack_Book_v7_-_Edge_Trim.pdf?v=1792709174","publisher":"Sherpa Equipment Co.","scope":"Atlas rack / fairing variants","note":"Confirm current mounting parts; guide includes factory-rack removal and assembly.","match":"family","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0506/7377/8878/files/Atlas_Rack_Book_v7_-_Edge_Trim.pdf?v=1792709174"}],"videos":[{"id":"expand-atlas-video","productIds":["acc-sherpa-atlas","acc-sherpa-atlas-alternate"],"type":"video","title":"Atlas rack install and factory-rack removal","url":"https://www.youtube.com/watch?v=ZAP-OpQGky8","publisher":"Sherpa Equipment Co.","scope":"LC250 / GX550 Atlas installation","note":"Manufacturer-linked installation; match your fairing and supplied mount revision. Linked by the manufacturer; uploader identity has not been independently confirmed.","match":"family","official":false,"purpose":"installation","checked":"2026-10-25","source":"https://sherpaec.com/products/atlas","manufacturerLinked":true,"creator":"Sherpa Equipment Co."}],"reviews":[],"clearance":null},{"id":"acc-sherpa-atlas-alternate","cat":"roof","subcat":"Roof racks","name":"Sherpa Atlas roof rack · Full Height (No Light Bar)","brand":"SHERPA","sku":"147844","price":1659,"source":"https://sherpaec.com/products/atlas?variant=45852311257343","variant":"Full Height (No Light Bar)","slot":"rack","modelId":"rack","desc":"Full-length aluminum roof-rack alternative with rubber-sealed mounting.","specs":"Approximately 65 lb · 97.8 × 50.5 × 2.5 inches · nine crossbars.","includes":"Sideplates, nine crossbars, mounting brackets, rubber seals, fairing and assembly hardware.","explain":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","hmin":3,"hmax":5,"gross":65,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","visual":"rack","checked":"October 25, 2026 (Pacific)","fitment":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","deps":[],"checks":[{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","page":"roof"}],"offers":[{"seller":"SHERPA","price":1659,"url":"https://sherpaec.com/products/atlas?variant=45852311257343"}],"recommendation":"Choose for a robust full-length platform; include rack weight in the roof-load budget.","available":true,"image":"acc-sherpa-atlas","label":"Full height · no light bar","choice":null,"url":"/products/sherpa-atlas-lc250-roof-rack?variant=acc-sherpa-atlas-alternate","priceAmount":1659,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 (Pacific)","fitmentText":"Manufacturer lists 2024+ US LC250; confirm exact year, grade and installation.","installHours":[3,5],"installBasis":"rack or equipment assembly, mounting, sealing/torque checks and clearance review; combined rack/tent work needs one installer quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Sideplates, nine crossbars, mounting brackets, rubber seals, fairing and assembly hardware."},{"label":"Exact fitment and supporting work","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Confirm vehicle roof and mounting limits before loading. Rack ratings do not raise Toyota limits; lights and accessory mounts are extra."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"expand-atlas-manual","productIds":["acc-sherpa-atlas","acc-sherpa-atlas-alternate"],"type":"manual","title":"Sherpa Atlas rack installation guide","url":"https://cdn.shopify.com/s/files/1/0506/7377/8878/files/Atlas_Rack_Book_v7_-_Edge_Trim.pdf?v=1792709174","publisher":"Sherpa Equipment Co.","scope":"Atlas rack / fairing variants","note":"Confirm current mounting parts; guide includes factory-rack removal and assembly.","match":"family","official":true,"purpose":"installation","checked":"2026-10-25","source":"https://cdn.shopify.com/s/files/1/0506/7377/8878/files/Atlas_Rack_Book_v7_-_Edge_Trim.pdf?v=1792709174"}],"videos":[{"id":"expand-atlas-video","productIds":["acc-sherpa-atlas","acc-sherpa-atlas-alternate"],"type":"video","title":"Atlas rack install and factory-rack removal","url":"https://www.youtube.com/watch?v=ZAP-OpQGky8","publisher":"Sherpa Equipment Co.","scope":"LC250 / GX550 Atlas installation","note":"Manufacturer-linked installation; match your fairing and supplied mount revision. Linked by the manufacturer; uploader identity has not been independently confirmed.","match":"family","official":false,"purpose":"installation","checked":"2026-10-25","source":"https://sherpaec.com/products/atlas","manufacturerLinked":true,"creator":"Sherpa Equipment Co."}],"reviews":[],"clearance":null}]},{"id":"rci-hybrid-trans","slug":"rci-lc250-hybrid-transmission-skid","path":"/products/rci-lc250-hybrid-transmission-skid","name":"RCI LC250 hybrid transmission skid","brand":"RCI OFFROAD","brandPath":"/brands/rci-offroad","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-26","defaultIndex":0,"variants":[{"id":"acc-rci-trans-steel","cat":"body","subcat":"Underbody armor","brand":"RCI OFFROAD","name":"RCI hybrid transmission skid · 3/16\" Steel - Black Powdercoat","sku":"TOYO-24-TRANS-HYB-STBK","price":395,"slot":"transmission-skid","variant":"3/16\" Steel - Black Powdercoat","source":"https://rcimetalworks.com/brand/rci-offroad/p-toyo-24-trans-hyb-hybrid-transmission-skid-plate-24-present-tacoma-land-cruiser-25-4runner/","offers":[{"seller":"SDHQ","price":395,"url":"https://sdhqoffroad.com/products/24-lc250-hybrid-transmission-skid-plate?variant=44955243610212"}],"gross":49,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","checked":"October 26, 2026 (America/Denver)","available":true,"manufacturerHours":false,"deps":[],"checks":[{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"}],"image":"rci-hybrid-trans","hmin":0.5,"hmax":1,"desc":"Bolt-on protection for the LC250 hybrid transmission and nearby crossmembers.","specs":"3/16 in steel · black powder coat · stand-alone or matched RCI skid system.","includes":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate.","fitment":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","explain":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package.","recommendation":"Choose steel for a lower purchase price or aluminum to reduce component mass; assess the complete protection package with your installer.","weightBasis":"Manufacturer lists 49 lb steel / 22 lb aluminum product mass. Removed factory protection is not weighed; net added load remains pending.","basis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","basisUrl":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","laborNote":"Task-based estimate from the official guide; not a measured LC250 average.","imageSource":"https://cdn.shopify.com/s/files/1/2493/2184/files/LC250Tramsmission-1024x791.png?v=1734543235","imageNote":"Supplier reference shows black-coated skid; selected material/finish is stated in the selector. Raw aluminum appearance differs.","label":"3/16\" Steel - Black Powdercoat","choice":null,"url":"/products/rci-lc250-hybrid-transmission-skid?variant=acc-rci-trans-steel","priceAmount":395,"priceBasis":"selected configuration","sourceChecked":"October 26, 2026 (America/Denver)","fitmentText":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate."},{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-rci-hybrid-trans","productIds":["acc-rci-trans-steel","acc-rci-trans-alraw","acc-rci-trans-alblack"],"type":"manual","title":"RCI 24+ Toyota hybrid transmission skid installation guide","url":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","publisher":"RCI Offroad","official":true,"scope":"Exact hybrid transmission skid family · steel / aluminum","match":"exact","note":"Mounting plates, spacers and optional adjacent RCI plates. Confirm current hardware revision.","checked":"2026-10-26","source":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","purpose":"installation"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rci-trans-alraw","cat":"body","subcat":"Underbody armor","brand":"RCI OFFROAD","name":"RCI hybrid transmission skid · 1/4\" 5052 Aluminum - Raw Finish","sku":"TOYO-24-TRANS-HYB-ALRAW","price":440,"slot":"transmission-skid","variant":"1/4\" 5052 Aluminum - Raw Finish","source":"https://rcimetalworks.com/brand/rci-offroad/p-toyo-24-trans-hyb-hybrid-transmission-skid-plate-24-present-tacoma-land-cruiser-25-4runner/","offers":[{"seller":"SDHQ","price":440,"url":"https://sdhqoffroad.com/products/24-lc250-hybrid-transmission-skid-plate?variant=44955243642980"}],"gross":22,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","checked":"October 26, 2026 (America/Denver)","available":true,"manufacturerHours":false,"deps":[],"checks":[{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"}],"image":"rci-hybrid-trans","hmin":0.5,"hmax":1,"desc":"Bolt-on protection for the LC250 hybrid transmission and nearby crossmembers.","specs":"1/4 in 5052 aluminum · raw finish · stand-alone or matched RCI skid system.","includes":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate.","fitment":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","explain":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package.","recommendation":"Choose steel for a lower purchase price or aluminum to reduce component mass; assess the complete protection package with your installer.","weightBasis":"Manufacturer lists 49 lb steel / 22 lb aluminum product mass. Removed factory protection is not weighed; net added load remains pending.","basis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","basisUrl":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","laborNote":"Task-based estimate from the official guide; not a measured LC250 average.","imageSource":"https://cdn.shopify.com/s/files/1/2493/2184/files/LC250Tramsmission-1024x791.png?v=1734543235","imageNote":"Supplier reference shows black-coated skid; selected material/finish is stated in the selector. Raw aluminum appearance differs.","label":"1/4\" 5052 Aluminum - Raw Finish","choice":null,"url":"/products/rci-lc250-hybrid-transmission-skid?variant=acc-rci-trans-alraw","priceAmount":440,"priceBasis":"selected configuration","sourceChecked":"October 26, 2026 (America/Denver)","fitmentText":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate."},{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-rci-hybrid-trans","productIds":["acc-rci-trans-steel","acc-rci-trans-alraw","acc-rci-trans-alblack"],"type":"manual","title":"RCI 24+ Toyota hybrid transmission skid installation guide","url":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","publisher":"RCI Offroad","official":true,"scope":"Exact hybrid transmission skid family · steel / aluminum","match":"exact","note":"Mounting plates, spacers and optional adjacent RCI plates. Confirm current hardware revision.","checked":"2026-10-26","source":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","purpose":"installation"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rci-trans-alblack","cat":"body","subcat":"Underbody armor","brand":"RCI OFFROAD","name":"RCI hybrid transmission skid · 1/4\" 5052 Aluminum - Black Powdercoat","sku":"TOYO-24-TRANS-HYB-ALBK","price":467,"slot":"transmission-skid","variant":"1/4\" 5052 Aluminum - Black Powdercoat","source":"https://rcimetalworks.com/brand/rci-offroad/p-toyo-24-trans-hyb-hybrid-transmission-skid-plate-24-present-tacoma-land-cruiser-25-4runner/","offers":[{"seller":"SDHQ","price":467,"url":"https://sdhqoffroad.com/products/24-lc250-hybrid-transmission-skid-plate?variant=44955243675748"}],"gross":22,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","checked":"October 26, 2026 (America/Denver)","available":true,"manufacturerHours":false,"deps":[],"checks":[{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"}],"image":"rci-hybrid-trans","hmin":0.5,"hmax":1,"desc":"Bolt-on protection for the LC250 hybrid transmission and nearby crossmembers.","specs":"1/4 in 5052 aluminum · black powder coat · stand-alone or matched RCI skid system.","includes":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate.","fitment":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","explain":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package.","recommendation":"Choose steel for a lower purchase price or aluminum to reduce component mass; assess the complete protection package with your installer.","weightBasis":"Manufacturer lists 49 lb steel / 22 lb aluminum product mass. Removed factory protection is not weighed; net added load remains pending.","basis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","basisUrl":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","laborNote":"Task-based estimate from the official guide; not a measured LC250 average.","imageSource":"https://cdn.shopify.com/s/files/1/2493/2184/files/LC250Tramsmission-1024x791.png?v=1734543235","imageNote":"Supplier reference shows black-coated skid; selected material/finish is stated in the selector. Raw aluminum appearance differs.","label":"1/4\" 5052 Aluminum - Black Powdercoat","choice":null,"url":"/products/rci-lc250-hybrid-transmission-skid?variant=acc-rci-trans-alblack","priceAmount":467,"priceBasis":"selected configuration","sourceChecked":"October 26, 2026 (America/Denver)","fitmentText":"Manufacturer lists 2024-present Land Cruiser hybrid; SDHQ lists 2024 LC250. Confirm US i-FORCE MAX VIN, model year and grade before ordering.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for mounting plates, lifting and bolting the skid, spacers and torque checks in the official guide. Manufacturer says installs in minutes but publishes no numeric whole-job hours; corrosion or other armor changes add time.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Transmission skid and mounting hardware. Engine / transfer-case plates and catalytic guards are separate."},{"label":"Existing armor and access","status":"check","detail":"Confirm factory shield removal, spacer arrangement and compatibility with the current engine and transfer-case skids.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"Use the supplied mounting plates and spacers. Verify overlap with retained factory or aftermarket armor; do not stack overlapping plates. This is not a full underbody armor package."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-rci-hybrid-trans","productIds":["acc-rci-trans-steel","acc-rci-trans-alraw","acc-rci-trans-alblack"],"type":"manual","title":"RCI 24+ Toyota hybrid transmission skid installation guide","url":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","publisher":"RCI Offroad","official":true,"scope":"Exact hybrid transmission skid family · steel / aluminum","match":"exact","note":"Mounting plates, spacers and optional adjacent RCI plates. Confirm current hardware revision.","checked":"2026-10-26","source":"https://rcimetalworks.com/media/rci/install-guides/RCI-24-Toyota-Hybrid-Transmission-Skid-Plate-Installation-Guide.docx-1.pdf","purpose":"installation"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-frontrunner-sl2","slug":"front-runner-slimline-ii-lc250-rack","path":"/products/front-runner-slimline-ii-lc250-rack","name":"Front Runner Slimline II LC250 rack","brand":"FRONT RUNNER","brandPath":"/brands/front-runner","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-26","defaultIndex":0,"variants":[{"id":"acc-frontrunner-sl2","cat":"roof","subcat":"Roof racks","brand":"FRONT RUNNER","name":"Front Runner Slimline II LC250 rack","sku":"KRTL047T","price":1848,"slot":"rack","variant":"KRTL047T · FATL006 rails + RRSTD11 tray","source":"https://www.dometic.com/en-us/product/toyota-land-cruiser-prado-roofrack-slimline-ii-krtl047t","offers":[{"seller":"SLEE · call to order / confirm stock","price":1848,"url":"https://sleeoffroad.com/products/krtl047/"},{"seller":"Dometic / Front Runner","price":1899,"url":"https://www.dometic.com/en-us/product/toyota-land-cruiser-prado-roofrack-slimline-ii-krtl047t"}],"gross":82.56,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","checked":"October 26, 2026 (America/Denver)","available":true,"manufacturerHours":false,"deps":[],"checks":[{"label":"Roof limits and mounted equipment","status":"check","detail":"Count rack, tent, awning and cargo together; verify Toyota driving/parked limits and approved mounts.","page":"roof"}],"image":null,"modelId":"rack","hmin":2,"hmax":4,"desc":"Full-length modular rack that replaces the factory rails or mounts at factory covered attachment points.","specs":"1255 × 2166 mm tray · T6 aluminum / steel · 82.56 lb approximate installed product mass; 103 lb is SHIPPING weight.","includes":"RRSTD11 tray, wind deflector, FATL006 four foot rails and listed mounting hardware.","fitment":"Dometic US lists Toyota Land Cruiser 250 2024-current. Confirm year, grade and roof equipment; this SKU is not the separate GX550 rack kit.","explain":"Remove original rails or covers/saddles as applicable. Seal mounting holes per FATL006. Confirm roof load limits, tent spacing, garage height and sunroof clearance; rack capacity does not increase Toyota roof capacity.","recommendation":"A narrow full-length modular alternative with a broad accessory ecosystem; compare its mass and finished height with lighter racks.","weightBasis":"82.56 lb is the manufacturer’s approximate installed rack mass, not net addition after removed rails. Net remains pending.","basis":"Research-based 2–4 hour professional allowance for tray assembly, rail/cover removal, spacers, hole sealing, lifting and fastening the rack, based on FATL006. No manufacturer complete-kit hours verified.","basisUrl":"https://content.frontrunneroutfitters.com/collateral/doc/F_FATL006.pdf","priceNote":"Lowest listed exact-SKU offer; SLEE says call to order. Confirm availability.","imageSource":"https://www.dometic.com/media/catalog/product/cache/5e86c224dde0af116b83ea127ee979a6/k/r/krtl047t-1.jpg","label":"KRTL047T · FATL006 rails + RRSTD11 tray","choice":null,"url":"/products/front-runner-slimline-ii-lc250-rack","priceAmount":1848,"priceBasis":"selected configuration","sourceChecked":"October 26, 2026 (America/Denver)","fitmentText":"Dometic US lists Toyota Land Cruiser 250 2024-current. Confirm year, grade and roof equipment; this SKU is not the separate GX550 rack kit.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional allowance for tray assembly, rail/cover removal, spacers, hole sealing, lifting and fastening the rack, based on FATL006. No manufacturer complete-kit hours verified.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"RRSTD11 tray, wind deflector, FATL006 four foot rails and listed mounting hardware."},{"label":"Roof limits and mounted equipment","status":"check","detail":"Count rack, tent, awning and cargo together; verify Toyota driving/parked limits and approved mounts.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove original rails or covers/saddles as applicable. Seal mounting holes per FATL006. Confirm roof load limits, tent spacing, garage height and sunroof clearance; rack capacity does not increase Toyota roof capacity."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-frontrunner-fatl006","productIds":["acc-frontrunner-sl2"],"type":"manual","title":"FATL006 LC250 foot-rail fitting instructions","url":"https://content.frontrunneroutfitters.com/collateral/doc/F_FATL006.pdf","publisher":"Front Runner","official":true,"scope":"Exact included foot rails · tray assembly separate","match":"component","note":"Covers rail/cover removal, sealing and rack attachment. References separate RRSTUNI tray assembly instructions; request these with the kit.","checked":"2026-10-26","source":"https://content.frontrunneroutfitters.com/collateral/doc/F_FATL006.pdf","purpose":"installation"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-cascadia-solar","slug":"cascadia-vss-2-0-hood-solar-panel","path":"/products/cascadia-vss-2-0-hood-solar-panel","name":"Cascadia VSS 2.0 hood solar panel","brand":"CASCADIA 4X4","brandPath":"/brands/cascadia-4x4","category":"power","categorySlug":"power-and-electrical","addedOn":"2026-10-26","defaultIndex":0,"variants":[{"id":"acc-cascadia-solar","cat":"power","subcat":"Solar charging","brand":"CASCADIA 4X4","name":"Cascadia VSS 2.0 hood solar panel","sku":"CHF158","price":569,"slot":"hood-solar","variant":"92 W panel only · charge controller extra","source":"https://www.cascadia4x4.com/products/toyota-land-cruiser-250-series-prado-2024-2025-vss-system-2-0-hood-bonnet-solar-panel","offers":[{"seller":"Cascadia 4x4","price":569,"url":"https://www.cascadia4x4.com/products/toyota-land-cruiser-250-series-prado-2024-2025-vss-system-2-0-hood-bonnet-solar-panel"}],"gross":null,"weight":null,"weightVerified":false,"realAccessory":true,"icon":"▰","checked":"October 26, 2026 (America/Denver)","available":true,"manufacturerHours":false,"deps":[],"checks":[{"label":"Compatible solar charge controller","status":"quote","detail":"Required and not included: obtain a compatible solar MPPT controller, battery profile, fuse protection and cables. A DC-DC charger alone does not establish solar compatibility.","page":"power"},{"label":"Power station / auxiliary battery interface","status":"check","detail":"Confirm exact input voltage/current/connectors and battery requirements. The optional 12 V accessory kit is separate; do not assume direct Jackery compatibility.","page":"power"}],"image":"cascadia-solar","hmin":1.5,"hmax":3,"desc":"Removable hood-mounted solar module; a separate solar charge controller is required.","specs":"92 W rated output · monocrystalline cells · SolarClasp attachment · matte ETFE surface. Rated output is not guaranteed daily energy.","includes":"Solar module, SolarClasp attachment components and instructions. Charge controller, battery, accessory kit and optional extensions are separate.","fitment":"Manufacturer application: Toyota Land Cruiser J250 2024–2025. Confirm US hood/paint/trim applicability; 2026 fitment is unverified.","explain":"Have an installer design the 12 V charging circuit and battery profile, fuse protection and protected cable route. Do not connect the module directly to a battery, hybrid traction system or power station without its approved solar-input arrangement.","recommendation":"Adds solar collection without using rack space. Select only after confirming the complete charging path and required controller; panel price is not a complete power system.","weightBasis":"Exact module and installed system weights not verified; no zero-weight assumption.","basis":"Research-based 1.5–3 hour professional planning allowance for hood preparation, removable attachments, protected cable routing, controller mounting/configuration and circuit checks. No numeric manufacturer hours or measured LC250 average verified; battery installation is extra.","basisUrl":"https://www.cascadia4x4.com/products/toyota-land-cruiser-250-series-prado-2024-2025-vss-system-2-0-hood-bonnet-solar-panel","imageSource":"https://cdn.shopify.com/s/files/1/1141/1762/files/250-land-cruiser-prado-hood-solar-panel.jpg?v=1761773527","imageNote":"Manufacturer LC250 installation photo; rack, lights, vehicle and other equipment are not included.","label":"92 W panel only · charge controller extra","choice":null,"url":"/products/cascadia-vss-2-0-hood-solar-panel","priceAmount":569,"priceBasis":"selected configuration","sourceChecked":"October 26, 2026 (America/Denver)","fitmentText":"Manufacturer application: Toyota Land Cruiser J250 2024–2025. Confirm US hood/paint/trim applicability; 2026 fitment is unverified.","installHours":[1.5,3],"installBasis":"Research-based 1.5–3 hour professional planning allowance for hood preparation, removable attachments, protected cable routing, controller mounting/configuration and circuit checks. No numeric manufacturer hours or measured LC250 average verified; battery installation is extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Solar module, SolarClasp attachment components and instructions. Charge controller, battery, accessory kit and optional extensions are separate."},{"label":"Compatible solar charge controller","status":"quote","detail":"Required and not included: obtain a compatible solar MPPT controller, battery profile, fuse protection and cables. A DC-DC charger alone does not establish solar compatibility.","page":"power"},{"label":"Power station / auxiliary battery interface","status":"check","detail":"Confirm exact input voltage/current/connectors and battery requirements. The optional 12 V accessory kit is separate; do not assume direct Jackery compatibility.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Have an installer design the 12 V charging circuit and battery profile, fuse protection and protected cable route. Do not connect the module directly to a battery, hybrid traction system or power station without its approved solar-input arrangement."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"roam95","slug":"roam-95l-rugged-case","path":"/products/roam-95l-rugged-case","name":"ROAM 95L Rugged Case","brand":"ROAM","brandPath":"/brands/roam","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-27","defaultIndex":0,"variants":[{"id":"acc-roam95-black","cat":"roof","subcat":"Rooftop storage","brand":"ROAM","name":"ROAM 95L Rugged Case · Black","sku":"ROAM-CASE-95L-BLK-LL","variant":"Black","price":449,"source":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834713766","offers":[{"seller":"ROAM","price":449,"url":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834713766"}],"slot":"roofcase","realAccessory":true,"icon":"▰","available":true,"gross":25,"weight":25,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"roam95-black","checks":[{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"}],"deps":[{"label":"Rated rack or cargo restraint system","slots":["rack"],"note":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","ids":["acc-roam95-mount"],"note":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"}],"weightIncomplete":true,"hmin":0.5,"hmax":1,"laborGroup":"ROAM 95L case / mount installation","desc":"Removable 95-liter gear case; roof mounts and stored contents are separate.","specs":"47.16 × 18.81 × 10.94 in exterior · 25 lb empty case · LLDPE shell · lockable latches · dust/water-resistant gasket.","includes":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included.","fitment":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","explain":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit.","recommendation":"Useful when you want removable recovery/camping storage instead of permanent drawers. Choose a mounting location before purchase.","weightBasis":"25 lb empty case component addition, excluding mount, cargo and extra hardware. Stored contents must be entered as cargo; rack and mount are separate products.","basis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","basisUrl":"https://www.roamadventureco.com/pages/user-manuals","imageSource":"https://cdn.shopify.com/s/files/1/2782/0202/products/95L_Artboard1.png?v=1770332133","label":"Black","choice":null,"url":"/products/roam-95l-rugged-case?variant=acc-roam95-black","priceAmount":449,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included."},{"label":"Rated rack or cargo restraint system","status":"check","detail":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","status":"check","detail":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"},{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-roam-mounts","productIds":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green","acc-roam95-mount"],"type":"video","title":"Universal Rugged Mount Assembly","url":"https://www.youtube.com/watch?v=Kojp1tDynkE","source":"https://www.roamadventureco.com/pages/user-manuals","publisher":"ROAM Adventure Co.","scope":"Manufacturer mounting-system family · rack interface varies","note":"Official manual library links this assembly video. Covers mount system, not certified LC250 rack fit. Case alone does not include mounts.","match":"family","official":true,"purpose":"installation","checked":"2026-10-27","creator":"ROAM Adventure Co."}],"reviews":[],"clearance":null},{"id":"acc-roam95-slate","cat":"roof","subcat":"Rooftop storage","brand":"ROAM","name":"ROAM 95L Rugged Case · Slate","sku":"ROAM-CASE-95L-SLATE-LL","variant":"Slate","price":449,"source":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834812070","offers":[{"seller":"ROAM","price":449,"url":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834812070"}],"slot":"roofcase","realAccessory":true,"icon":"▰","available":true,"gross":25,"weight":25,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"roam95-slate","checks":[{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"}],"deps":[{"label":"Rated rack or cargo restraint system","slots":["rack"],"note":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","ids":["acc-roam95-mount"],"note":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"}],"weightIncomplete":true,"hmin":0.5,"hmax":1,"laborGroup":"ROAM 95L case / mount installation","desc":"Removable 95-liter gear case; roof mounts and stored contents are separate.","specs":"47.16 × 18.81 × 10.94 in exterior · 25 lb empty case · LLDPE shell · lockable latches · dust/water-resistant gasket.","includes":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included.","fitment":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","explain":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit.","recommendation":"Useful when you want removable recovery/camping storage instead of permanent drawers. Choose a mounting location before purchase.","weightBasis":"25 lb empty case component addition, excluding mount, cargo and extra hardware. Stored contents must be entered as cargo; rack and mount are separate products.","basis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","basisUrl":"https://www.roamadventureco.com/pages/user-manuals","imageSource":"https://cdn.shopify.com/s/files/1/2782/0202/products/95L_Artboard1copy3.png?v=1770332133","label":"Slate","choice":null,"url":"/products/roam-95l-rugged-case?variant=acc-roam95-slate","priceAmount":449,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included."},{"label":"Rated rack or cargo restraint system","status":"check","detail":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","status":"check","detail":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"},{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-roam-mounts","productIds":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green","acc-roam95-mount"],"type":"video","title":"Universal Rugged Mount Assembly","url":"https://www.youtube.com/watch?v=Kojp1tDynkE","source":"https://www.roamadventureco.com/pages/user-manuals","publisher":"ROAM Adventure Co.","scope":"Manufacturer mounting-system family · rack interface varies","note":"Official manual library links this assembly video. Covers mount system, not certified LC250 rack fit. Case alone does not include mounts.","match":"family","official":true,"purpose":"installation","checked":"2026-10-27","creator":"ROAM Adventure Co."}],"reviews":[],"clearance":null},{"id":"acc-roam95-tan","cat":"roof","subcat":"Rooftop storage","brand":"ROAM","name":"ROAM 95L Rugged Case · Desert Tan","sku":"ROAM-CASE-95L-DESERTTAN-LL","variant":"Desert Tan","price":449,"source":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834746534","offers":[{"seller":"ROAM","price":449,"url":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834746534"}],"slot":"roofcase","realAccessory":true,"icon":"▰","available":true,"gross":25,"weight":25,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"roam95-tan","checks":[{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"}],"deps":[{"label":"Rated rack or cargo restraint system","slots":["rack"],"note":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","ids":["acc-roam95-mount"],"note":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"}],"weightIncomplete":true,"hmin":0.5,"hmax":1,"laborGroup":"ROAM 95L case / mount installation","desc":"Removable 95-liter gear case; roof mounts and stored contents are separate.","specs":"47.16 × 18.81 × 10.94 in exterior · 25 lb empty case · LLDPE shell · lockable latches · dust/water-resistant gasket.","includes":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included.","fitment":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","explain":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit.","recommendation":"Useful when you want removable recovery/camping storage instead of permanent drawers. Choose a mounting location before purchase.","weightBasis":"25 lb empty case component addition, excluding mount, cargo and extra hardware. Stored contents must be entered as cargo; rack and mount are separate products.","basis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","basisUrl":"https://www.roamadventureco.com/pages/user-manuals","imageSource":"https://cdn.shopify.com/s/files/1/2782/0202/products/95L_Artboard1copy.png?v=1770332133","label":"Desert Tan","choice":null,"url":"/products/roam-95l-rugged-case?variant=acc-roam95-tan","priceAmount":449,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included."},{"label":"Rated rack or cargo restraint system","status":"check","detail":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","status":"check","detail":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"},{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-roam-mounts","productIds":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green","acc-roam95-mount"],"type":"video","title":"Universal Rugged Mount Assembly","url":"https://www.youtube.com/watch?v=Kojp1tDynkE","source":"https://www.roamadventureco.com/pages/user-manuals","publisher":"ROAM Adventure Co.","scope":"Manufacturer mounting-system family · rack interface varies","note":"Official manual library links this assembly video. Covers mount system, not certified LC250 rack fit. Case alone does not include mounts.","match":"family","official":true,"purpose":"installation","checked":"2026-10-27","creator":"ROAM Adventure Co."}],"reviews":[],"clearance":null},{"id":"acc-roam95-green","cat":"roof","subcat":"Rooftop storage","brand":"ROAM","name":"ROAM 95L Rugged Case · OD Green","sku":"ROAM-CASE-95L-ODGREEN-LL","variant":"OD Green","price":449,"source":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834779302","offers":[{"seller":"ROAM","price":449,"url":"https://www.roamadventureco.com/products/95l-the-rugged-case?variant=36756834779302"}],"slot":"roofcase","realAccessory":true,"icon":"▰","available":true,"gross":25,"weight":25,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"roam95-green","checks":[{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"}],"deps":[{"label":"Rated rack or cargo restraint system","slots":["rack"],"note":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","ids":["acc-roam95-mount"],"note":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"}],"weightIncomplete":true,"hmin":0.5,"hmax":1,"laborGroup":"ROAM 95L case / mount installation","desc":"Removable 95-liter gear case; roof mounts and stored contents are separate.","specs":"47.16 × 18.81 × 10.94 in exterior · 25 lb empty case · LLDPE shell · lockable latches · dust/water-resistant gasket.","includes":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included.","fitment":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","explain":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit.","recommendation":"Useful when you want removable recovery/camping storage instead of permanent drawers. Choose a mounting location before purchase.","weightBasis":"25 lb empty case component addition, excluding mount, cargo and extra hardware. Stored contents must be entered as cargo; rack and mount are separate products.","basis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","basisUrl":"https://www.roamadventureco.com/pages/user-manuals","imageSource":"https://cdn.shopify.com/s/files/1/2782/0202/products/95L_Artboard1copy2.png?v=1770332133","label":"OD Green","choice":null,"url":"/products/roam-95l-rugged-case?variant=acc-roam95-green","priceAmount":449,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal case, not an LC250 bolt-on kit. US 2024+ LC250 year/grade compatibility depends on rack or rated cargo restraints, mounting footprint and clearances.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional allowance for first-time mount layout/assembly, rack fastening, case engagement, clearance and load checks using the maker mount assembly guide. Mount and case share one job when both selected; not the seconds needed for routine quick release.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected-color case with handles and listed lid hardware. Rack, mounts, padlock, organizers and cargo are not included."},{"label":"Rated rack or cargo restraint system","status":"check","detail":"For roof use confirm a compatible rack and ROAM 95L mounts or other approved restraint. Cabin installation requires rated cargo anchors instead.","page":"roof"},{"label":"95L case mounts for rooftop use","status":"check","detail":"ROAM 95L Rugged Mounts are sold separately; confirm rack fit and any extra mounting hardware.","page":"roof"},{"label":"Loaded roof / cargo restraint limits","status":"check","detail":"Count case, rack, mount and contents; verify Toyota/rack limits and garage clearance. Do not leave an unsecured case in the cabin.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"For roof use choose compatible case mounts, verify rack slot/bolt geometry, roof limits and loaded case mass. Interior use requires rated cargo restraints. Do not treat a universal case as proof of LC250 rack fit."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-roam-mounts","productIds":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green","acc-roam95-mount"],"type":"video","title":"Universal Rugged Mount Assembly","url":"https://www.youtube.com/watch?v=Kojp1tDynkE","source":"https://www.roamadventureco.com/pages/user-manuals","publisher":"ROAM Adventure Co.","scope":"Manufacturer mounting-system family · rack interface varies","note":"Official manual library links this assembly video. Covers mount system, not certified LC250 rack fit. Case alone does not include mounts.","match":"family","official":true,"purpose":"installation","checked":"2026-10-27","creator":"ROAM Adventure Co."}],"reviews":[],"clearance":null}]},{"id":"acc-roam95-mount","slug":"roam-95l-rugged-mounts","path":"/products/roam-95l-rugged-mounts","name":"ROAM 95L Rugged Mounts","brand":"ROAM","brandPath":"/brands/roam","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-27","defaultIndex":0,"variants":[{"id":"acc-roam95-mount","cat":"roof","subcat":"Case mounting","brand":"ROAM","name":"ROAM 95L Rugged Mounts","sku":"ROAM-RMOUNT-95L","variant":"95L quick-release mounting system","price":234,"source":"https://www.roamadventureco.com/products/95l-rugged-mounts?variant=42860266094824","offers":[{"seller":"ROAM","price":234,"url":"https://www.roamadventureco.com/products/95l-rugged-mounts?variant=42860266094824"}],"slot":"roofcase-mount","realAccessory":true,"icon":"▰","available":true,"gross":10,"weight":10,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"roam95-mount","checks":[],"deps":[{"label":"ROAM 95L case","ids":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green"],"note":"Requires a compatible ROAM 95L Rugged Case; other capacities need their matching mounts.","page":"roof"},{"label":"Compatible rack","slots":["rack"],"note":"Confirm slot/bolt dimensions, rated mounting surface and any separate sandwich-plate kit.","page":"roof"}],"weightIncomplete":true,"hmin":0.5,"hmax":1,"laborGroup":"ROAM 95L case / mount installation","desc":"Quick-release roof mounting system for the ROAM 95L case; case and rack separate.","specs":"10 lb product mass · 18.4 × 10 × 2 in · stainless steel / TPE feet · supplied 1/4-20 carriage bolts for 80/20-style slots.","includes":"95L Rugged Mount system and listed 1/4-20 hardware. Extra sandwich plates/hardware, locks, rack and case not included.","fitment":"Universal rack accessory. No automatic US LC250 year/grade fit claim; verify the exact rack slots and mounting surface.","explain":"Do not assume 1/4-20 hardware fits every metric roof-rack T-slot. Confirm approved fasteners and any separate sandwich plates; confirm case engagement and roof/cargo limits.","recommendation":"Choose with the 95L case when quick removal matters; first verify your rack interface.","weightBasis":"10 lb added mount component. Case, cargo, rack and any additional interface hardware are separate.","basis":"Research-based 0.5–1 hour professional first-install allowance for mount assembly, rack interface/fasteners, alignment and locking checks using the official guide. Shared with case installation, not a per-item duplicated charge.","basisUrl":"https://www.roamadventureco.com/pages/user-manuals","imageSource":"https://cdn.shopify.com/s/files/1/2782/0202/products/95l_on_case_30a7f3ad-a9a8-4c34-b814-4f43fcd5f375.png?v=1745594899","imageNote":"Manufacturer photo shows mounts with a case; case is separate.","label":"95L quick-release mounting system","choice":null,"url":"/products/roam-95l-rugged-mounts","priceAmount":234,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal rack accessory. No automatic US LC250 year/grade fit claim; verify the exact rack slots and mounting surface.","installHours":[0.5,1],"installBasis":"Research-based 0.5–1 hour professional first-install allowance for mount assembly, rack interface/fasteners, alignment and locking checks using the official guide. Shared with case installation, not a per-item duplicated charge.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"95L Rugged Mount system and listed 1/4-20 hardware. Extra sandwich plates/hardware, locks, rack and case not included."},{"label":"ROAM 95L case","status":"check","detail":"Requires a compatible ROAM 95L Rugged Case; other capacities need their matching mounts.","page":"roof"},{"label":"Compatible rack","status":"check","detail":"Confirm slot/bolt dimensions, rated mounting surface and any separate sandwich-plate kit.","page":"roof"},{"label":"Installation / compatibility notes","status":"check","detail":"Do not assume 1/4-20 hardware fits every metric roof-rack T-slot. Confirm approved fasteners and any separate sandwich plates; confirm case engagement and roof/cargo limits."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-roam-mounts","productIds":["acc-roam95-black","acc-roam95-slate","acc-roam95-tan","acc-roam95-green","acc-roam95-mount"],"type":"video","title":"Universal Rugged Mount Assembly","url":"https://www.youtube.com/watch?v=Kojp1tDynkE","source":"https://www.roamadventureco.com/pages/user-manuals","publisher":"ROAM Adventure Co.","scope":"Manufacturer mounting-system family · rack interface varies","note":"Official manual library links this assembly video. Covers mount system, not certified LC250 rack fit. Case alone does not include mounts.","match":"family","official":true,"purpose":"installation","checked":"2026-10-27","creator":"ROAM Adventure Co."}],"reviews":[],"clearance":null}]},{"id":"acc-ecoflow800","slug":"ecoflow-800w-alternator-charger","path":"/products/ecoflow-800w-alternator-charger","name":"EcoFlow 800W Alternator Charger","brand":"ECOFLOW","brandPath":"/brands/ecoflow","category":"power","categorySlug":"power-and-electrical","addedOn":"2026-10-27","defaultIndex":0,"variants":[{"id":"acc-ecoflow800","cat":"power","subcat":"Power-station charging","brand":"ECOFLOW","name":"EcoFlow 800W Alternator Charger","sku":"EFAlternatorCharger","variant":"800W charger only · EF-FC-301-1 / EFAlternatorCharger","price":269,"source":"https://us.ecoflow.com/products/800w-alternator-charger?variant=41064248836169","offers":[{"seller":"ECOFLOW","price":269,"url":"https://us.ecoflow.com/products/800w-alternator-charger?variant=41064248836169"}],"slot":"dcdc","realAccessory":true,"icon":"▰","available":true,"gross":5.1,"weight":5.1,"weightVerified":true,"checked":"October 27, 2026 (America/Denver)","manufacturerHours":false,"image":"ecoflow800","checks":[{"label":"LC250 hybrid 12 V supply approval","status":"check","detail":"Confirm available current, approved Toyota connection points, fuse/cable protection and operating settings. Generic hybrid-adaptable marketing is not LC250 approval.","page":"power"},{"label":"Compatible EcoFlow station and adapters","status":"quote","detail":"Required: confirm exact station/XT150 cable and any model-specific adapter. No station is included in the charger-only price; do not assume it connects to Jackery.","page":"power"}],"deps":[],"weightIncomplete":true,"hmin":2,"hmax":4,"desc":"DC-DC charging for compatible EcoFlow power stations; vehicle electrical suitability must be verified.","specs":"Model EF-FC-301-1 · 800 W maximum · up to 76 A input · 5.1 lb charger only · 242 × 194 × 35 mm. Power-station output 40–60 V; not a generic 12 V accessory output.","includes":"Charger-only retail configuration, not a DELTA bundle. Confirm current supplied input/XT150 cables, fuse and mounting pieces; power station and model-specific adapters are separate.","fitment":"Universal electrical device, not an LC250-specific kit. No exact US 2024+ LC250 hybrid/VIN/grade approval established. Installer must confirm Toyota 12 V DC-DC supply limits and permitted connection points.","explain":"Do not connect to the hybrid traction battery. Verify allowable 12 V draw and charger settings with Toyota and EcoFlow before purchase. Confirm exact EcoFlow power-station cable/adapter/firmware compatibility; Jackery compatibility is not established. An 800 W rating does not guarantee that output in an LC250.","recommendation":"Consider for an EcoFlow power-station build only after vehicle power-budget and connector approval. Compare the complete charger/station/interface cost, not charger price alone.","weightBasis":"Manufacturer 5.1 lb is charger net device mass (without packaging), not complete installed system mass. Cables, fuse, brackets and power station are extra; shown addition remains incomplete.","basis":"Research-based 2–4 hour professional planning allowance for approved circuit design, cable/fuse routing, trim access, mounting and configuration/testing using the manufacturer-authored guide. Exact LC250 hours not published or measured; extra battery/adapter work quoted separately.","basisUrl":"https://www.offgridtec.com/media/product_attachements/EcoFlow_800W_Batterieladeger%C3%A4t_Alternator-Charger_UserManual.pdf","imageSource":"https://cdn.shopify.com/s/files/1/1996/9707/files/ecoflow-ecoflow-800w-alternator-charger-alternator-charger-ecoflow-800w-alternator-charger-31427701178441.png?v=1762400020","label":"800W charger only · EF-FC-301-1 / EFAlternatorCharger","choice":null,"url":"/products/ecoflow-800w-alternator-charger","priceAmount":269,"priceBasis":"selected configuration","sourceChecked":"October 27, 2026 (America/Denver)","fitmentText":"Universal electrical device, not an LC250-specific kit. No exact US 2024+ LC250 hybrid/VIN/grade approval established. Installer must confirm Toyota 12 V DC-DC supply limits and permitted connection points.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for approved circuit design, cable/fuse routing, trim access, mounting and configuration/testing using the manufacturer-authored guide. Exact LC250 hours not published or measured; extra battery/adapter work quoted separately.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Charger-only retail configuration, not a DELTA bundle. Confirm current supplied input/XT150 cables, fuse and mounting pieces; power station and model-specific adapters are separate."},{"label":"LC250 hybrid 12 V supply approval","status":"check","detail":"Confirm available current, approved Toyota connection points, fuse/cable protection and operating settings. Generic hybrid-adaptable marketing is not LC250 approval.","page":"power"},{"label":"Compatible EcoFlow station and adapters","status":"quote","detail":"Required: confirm exact station/XT150 cable and any model-specific adapter. No station is included in the charger-only price; do not assume it connects to Jackery.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Do not connect to the hybrid traction battery. Verify allowable 12 V draw and charger settings with Toyota and EcoFlow before purchase. Confirm exact EcoFlow power-station cable/adapter/firmware compatibility; Jackery compatibility is not established. An 800 W rating does not guarantee that output in an LC250."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-ecoflow800","productIds":["acc-ecoflow800"],"type":"manual","title":"EcoFlow 800W Alternator Charger user manual · retailer-hosted copy","url":"https://www.offgridtec.com/media/product_attachements/EcoFlow_800W_Batterieladeger%C3%A4t_Alternator-Charger_UserManual.pdf","source":"https://us.ecoflow.com/products/800w-alternator-charger","publisher":"EcoFlow manual / Offgridtec mirror","scope":"Exact device family · generic vehicle installation","note":"Manufacturer-authored 16-page guide hosted by retailer. Confirm latest revision with EcoFlow. Not an LC250 hybrid approval or a Toyota wiring procedure.","match":"family","official":false,"purpose":"installation","checked":"2026-10-27"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-arb-brushless","slug":"arb-brushless-twin-onboard-compressor","path":"/products/arb-brushless-twin-onboard-compressor","name":"ARB Brushless Twin onboard compressor","brand":"ARB","brandPath":"/brands/arb","category":"air","categorySlug":"onboard-air","addedOn":"2026-10-28","defaultIndex":0,"variants":[{"id":"acc-arb-brushless","name":"ARB Brushless Twin onboard compressor","brand":"ARB","sku":"CKBLTA12","price":949.95,"source":"https://store.arbusa.com/brushless-twin-motor-onboard-12v-air-compressor-ckblta12/","offers":[{"seller":"ARB USA","price":949.95,"url":"https://store.arbusa.com/brushless-twin-motor-onboard-12v-air-compressor-ckblta12/"},{"seller":"SLEE Off Road","price":949.95,"url":"https://sleeoffroad.com/products/ckblta12/"}],"slot":"air","cat":"air","subcat":"Compressors","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Exact selected SKU","available":true,"manufacturerHours":false,"gross":13.2,"weight":13.2,"weightVerified":true,"image":"arb-brushless","deps":[{"label":"Compatible LC250 compressor mount","ids":["acc-slee-mount"],"note":"SLEE SOK2105 documents Brushless Twin compatibility. Verify ECU/underhood clearance and supplied hardware.","page":"air"},{"label":"Inflation hose and correct fittings","slots":["airkit"],"note":"Choose rated inflation hose/outlet plumbing; confirm exact coupling and mounting.","page":"air"}],"checks":[{"label":"LC250 12 V power budget and protection","status":"check","detail":"ARB manual requires continuous 90 A at 12.5 V or higher; confirm Toyota-approved supply, wiring/fuses, voltage under load and fan clearance.","page":"power"},{"label":"Remote manifold recommendation","status":"conditional","detail":"SLEE recommends ARB 171503 and a pump-up kit with twin compressors. Quote these or an installer-approved heat-rated remote outlet; they are not in this compressor price.","page":"air"}],"weightIncomplete":true,"hmin":3,"hmax":5,"laborGroup":"Onboard air · mounting / wiring / plumbing","desc":"Brushless 12 V twin onboard compressor with active motor cooling; mounting and tire plumbing are separate.","specs":"3.9 × 8.3 × 11 in · 13.2 lb device · manual requires 90 A continuous supply at 12.5 V or above · at least 2 in cooling-fan clearance.","includes":"CKBLTA12 compressor and supplied generic installation equipment; confirm current packing list. LC250 mounting tray, remote plumbing/manifold and inflation hose are separate.","fitment":"Universal compressor. SLEE explicitly lists CKBLTA12 compatibility with its SOK2105 LC250 mount. Confirm US 2024+ year/grade, hybrid 12 V capacity, ECU relocation and other underhood equipment.","explain":"Installer must approve a protected circuit and the full 90 A supply requirement against LC250 hybrid 12 V limits. Never use the traction battery. Retain fan/filter access and verify high-temperature plumbing. SLEE recommends a remote manifold and pump-up kit for its twin-compressor installation.","recommendation":"Higher-output alternative to the classic ARB twin when power budget, ventilation and mounting are confirmed; compare complete installed scope.","weightBasis":"13.2 lb compressor addition only. Tray, wiring and air fittings add mass; a removed prior compressor is not deducted automatically.","basis":"Researched 3–5 hour professional planning allowance for LC250 tray/ECU access, mounting, protected wiring, outlet plumbing and leak/function tests following ARB instructions. No published numeric LC250 whole-job time verified; shared onboard-air components are counted once.","basisUrl":"https://store.arbusa.com/content/CKBLTA12%20INST.pdf","imageSource":"https://cdn11.bigcommerce.com/s-wg9nennc1z/images/stencil/200x200/products/14863/13148504/arb-brushless-twin-motor-onboard-12v-air-compressor-ckblta12__15470.1772067191.jpg?c=1","label":"Exact selected SKU","choice":null,"url":"/products/arb-brushless-twin-onboard-compressor","priceAmount":949.95,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal compressor. SLEE explicitly lists CKBLTA12 compatibility with its SOK2105 LC250 mount. Confirm US 2024+ year/grade, hybrid 12 V capacity, ECU relocation and other underhood equipment.","installHours":[3,5],"installBasis":"Researched 3–5 hour professional planning allowance for LC250 tray/ECU access, mounting, protected wiring, outlet plumbing and leak/function tests following ARB instructions. No published numeric LC250 whole-job time verified; shared onboard-air components are counted once.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"CKBLTA12 compressor and supplied generic installation equipment; confirm current packing list. LC250 mounting tray, remote plumbing/manifold and inflation hose are separate."},{"label":"Compatible LC250 compressor mount","status":"check","detail":"SLEE SOK2105 documents Brushless Twin compatibility. Verify ECU/underhood clearance and supplied hardware.","page":"air"},{"label":"Inflation hose and correct fittings","status":"check","detail":"Choose rated inflation hose/outlet plumbing; confirm exact coupling and mounting.","page":"air"},{"label":"LC250 12 V power budget and protection","status":"check","detail":"ARB manual requires continuous 90 A at 12.5 V or higher; confirm Toyota-approved supply, wiring/fuses, voltage under load and fan clearance.","page":"power"},{"label":"Remote manifold recommendation","status":"conditional","detail":"SLEE recommends ARB 171503 and a pump-up kit with twin compressors. Quote these or an installer-approved heat-rated remote outlet; they are not in this compressor price.","page":"air"},{"label":"Installation / compatibility notes","status":"check","detail":"Installer must approve a protected circuit and the full 90 A supply requirement against LC250 hybrid 12 V limits. Never use the traction battery. Retain fan/filter access and verify high-temperature plumbing. SLEE recommends a remote manifold and pump-up kit for its twin-compressor installation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-arb-brushless","productIds":["acc-arb-brushless"],"type":"manual","title":"ARB CKBLTA12 Brushless Twin installation guide","url":"https://store.arbusa.com/content/CKBLTA12%20INST.pdf","source":"https://store.arbusa.com/content/CKBLTA12%20INST.pdf","publisher":"ARB","scope":"Exact compressor · universal mounting / electrical / plumbing","match":"exact","note":"Confirm current supplied revision and vehicle-specific connections. Does not certify the complete LC250 configuration.","purpose":"installation","official":true,"checked":"2026-10-28"}],"videos":[{"id":"video-slee-airline-reindex","productIds":["acc-arb-brushless","acc-arb-manifold"],"type":"video","title":"Re-indexing ARB air-line crimped fittings","url":"https://www.youtube.com/watch?v=W8JMu1IzFrM","source":"https://sleeoffroad.com/products/sok2105/","publisher":"SLEE-linked video · uploader not verified","scope":"Supplier installation subtask · air-line fitting orientation","match":"component","note":"Linked by SLEE for its compressor mount; only fitting orientation, not a full compressor/manifold installation or LC250 electrical guide.","purpose":"installation","official":false,"checked":"2026-10-28","manufacturerLinked":true,"creator":"SLEE-linked video · uploader not verified"}],"reviews":[],"clearance":null}]},{"id":"morr-tensix-gen2","slug":"morrflate-tensix-psi-pro-gen2","path":"/products/morrflate-tensix-psi-pro-gen2","name":"MORRFlate TenSix PSI Pro Gen2","brand":"MORRFlate","brandPath":"/brands/morrflate","category":"air","categorySlug":"onboard-air","addedOn":"2026-10-28","defaultIndex":0,"variants":[{"id":"acc-morr-tensix-l","name":"MORRFlate TenSix PSI Pro Gen2 · Groovy Glove L","brand":"MORRFLATE","sku":"MF-PSIPRO-10-groovy-glove-l","price":325,"source":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279523411","offers":[{"seller":"MORRFLATE","price":325,"url":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279523411"}],"slot":"air","cat":"air","subcat":"Compressors","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Groovy Glove L · compressor, no multi-tire hose kit","available":true,"manufacturerHours":false,"gross":null,"weight":null,"weightVerified":false,"image":"morr-tensix","deps":[{"label":"Four-tire distribution hose kit","ids":["acc-morr-quad125"],"note":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"}],"checks":[{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"}],"hmin":0,"hmax":0,"desc":"Portable 12 V automatic compressor optimized for four-tire inflation; select the included glove size.","specs":"10.6 CFM at 0 psi / 6.5 CFM at 30 psi · 90 A peak / about 50 A running · 14 × 7 × 9 in · Auto mode 10–120 psi.","includes":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents.","fitment":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","explain":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo.","recommendation":"Portable alternative when you want automatic pressure control without permanent vehicle installation; budget for the four-tire kit and verify power capacity first.","weightBasis":"Exact portable-kit weight unverified. Retailer values conflict or may include packaging; no 20/25/26 lb value adopted.","laborScope":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","basisUrl":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","imageSource":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/Front-and-Bag-scaled.jpg?v=1775851300","imageNote":"Manufacturer compressor reference; selected glove size is stated in the option selector. Hose kit separate.","label":"Groovy Glove L","choice":null,"url":"/products/morrflate-tensix-psi-pro-gen2?variant=acc-morr-tensix-l","priceAmount":325,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","installHours":[0,0],"installBasis":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents."},{"label":"Four-tire distribution hose kit","status":"check","detail":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"},{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-morr-tensix","productIds":["acc-morr-tensix-l","acc-morr-tensix-shmedium","acc-morr-tensix-xl"],"type":"manual","title":"MORRFlate compressor setup and operation","url":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","source":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","publisher":"MORRFlate","scope":"Manufacturer compressor family · PSI Pro operation, not a permanent LC250 install","match":"family","note":"Confirm current supplied revision and vehicle-specific connections. Does not certify the complete LC250 configuration.","purpose":"installation","official":true,"checked":"2026-10-28"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-morr-tensix-shmedium","name":"MORRFlate TenSix PSI Pro Gen2 · Groovy Glove Shmedium","brand":"MORRFLATE","sku":"MF-PSIPRO-10-groovy-glove-shmedium","price":325,"source":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279556179","offers":[{"seller":"MORRFLATE","price":325,"url":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279556179"}],"slot":"air","cat":"air","subcat":"Compressors","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Groovy Glove Shmedium · compressor, no multi-tire hose kit","available":true,"manufacturerHours":false,"gross":null,"weight":null,"weightVerified":false,"image":"morr-tensix","deps":[{"label":"Four-tire distribution hose kit","ids":["acc-morr-quad125"],"note":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"}],"checks":[{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"}],"hmin":0,"hmax":0,"desc":"Portable 12 V automatic compressor optimized for four-tire inflation; select the included glove size.","specs":"10.6 CFM at 0 psi / 6.5 CFM at 30 psi · 90 A peak / about 50 A running · 14 × 7 × 9 in · Auto mode 10–120 psi.","includes":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents.","fitment":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","explain":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo.","recommendation":"Portable alternative when you want automatic pressure control without permanent vehicle installation; budget for the four-tire kit and verify power capacity first.","weightBasis":"Exact portable-kit weight unverified. Retailer values conflict or may include packaging; no 20/25/26 lb value adopted.","laborScope":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","basisUrl":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","imageSource":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/Front-and-Bag-scaled.jpg?v=1775851300","imageNote":"Manufacturer compressor reference; selected glove size is stated in the option selector. Hose kit separate.","label":"Groovy Glove Shmedium","choice":null,"url":"/products/morrflate-tensix-psi-pro-gen2?variant=acc-morr-tensix-shmedium","priceAmount":325,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","installHours":[0,0],"installBasis":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents."},{"label":"Four-tire distribution hose kit","status":"check","detail":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"},{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-morr-tensix","productIds":["acc-morr-tensix-l","acc-morr-tensix-shmedium","acc-morr-tensix-xl"],"type":"manual","title":"MORRFlate compressor setup and operation","url":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","source":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","publisher":"MORRFlate","scope":"Manufacturer compressor family · PSI Pro operation, not a permanent LC250 install","match":"family","note":"Confirm current supplied revision and vehicle-specific connections. Does not certify the complete LC250 configuration.","purpose":"installation","official":true,"checked":"2026-10-28"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-morr-tensix-xl","name":"MORRFlate TenSix PSI Pro Gen2 · Groovy Glove XL","brand":"MORRFLATE","sku":"MF-PSIPRO-10-groovy-glove-xl","price":325,"source":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279588947","offers":[{"seller":"MORRFLATE","price":325,"url":"https://morrflate.com/products/morrflate-tensix-psi-pro-12v-portable-compressor-gen2?variant=44424279588947"}],"slot":"air","cat":"air","subcat":"Compressors","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Groovy Glove XL · compressor, no multi-tire hose kit","available":true,"manufacturerHours":false,"gross":null,"weight":null,"weightVerified":false,"image":"morr-tensix","deps":[{"label":"Four-tire distribution hose kit","ids":["acc-morr-quad125"],"note":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"}],"checks":[{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"}],"hmin":0,"hmax":0,"desc":"Portable 12 V automatic compressor optimized for four-tire inflation; select the included glove size.","specs":"10.6 CFM at 0 psi / 6.5 CFM at 30 psi · 90 A peak / about 50 A running · 14 × 7 × 9 in · Auto mode 10–120 psi.","includes":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents.","fitment":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","explain":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo.","recommendation":"Portable alternative when you want automatic pressure control without permanent vehicle installation; budget for the four-tire kit and verify power capacity first.","weightBasis":"Exact portable-kit weight unverified. Retailer values conflict or may include packaging; no 20/25/26 lb value adopted.","laborScope":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","basisUrl":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","imageSource":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/Front-and-Bag-scaled.jpg?v=1775851300","imageNote":"Manufacturer compressor reference; selected glove size is stated in the option selector. Hose kit separate.","label":"Groovy Glove XL","choice":null,"url":"/products/morrflate-tensix-psi-pro-gen2?variant=acc-morr-tensix-xl","priceAmount":325,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal portable equipment, not an LC250 permanent-mount kit. Confirm safe 12 V connection points and available current for every US 2024+ LC250 year/grade.","installHours":[0,0],"installBasis":"Portable use: no permanent professional installation, so 0 hr. Temporary setup, electrical suitability checks and recurring connection time are not vehicle-install labor. Hard mounting or custom wiring needs a separate quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected TenSix PSI Pro Gen2 compressor/glove-size configuration and listed carrying/accessory equipment. Four-tire hose kit is separate; verify current package contents."},{"label":"Four-tire distribution hose kit","status":"check","detail":"MORRFlate warns against routine sequential single-tire use. Choose a compatible four-tire kit and confirm hose reach/air-source location.","page":"air"},{"label":"High-current portable connection","status":"check","detail":"Verify approved LC250 12 V battery/ground connection points and supply capacity for 90 A peak; no accessory socket or traction-battery connection.","page":"power"},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer warns against airing all four tires sequentially through one hose; routine use requires multi-tire distribution. Do not assume the ARB single-tire pump-up hose satisfies this. Use Toyota-approved 12 V connections, follow duty cycle/heat precautions and secure the unit as cargo."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-morr-tensix","productIds":["acc-morr-tensix-l","acc-morr-tensix-shmedium","acc-morr-tensix-xl"],"type":"manual","title":"MORRFlate compressor setup and operation","url":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","source":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/compressor-instructions.pdf?v=1775835518","publisher":"MORRFlate","scope":"Manufacturer compressor family · PSI Pro operation, not a permanent LC250 install","match":"family","note":"Confirm current supplied revision and vehicle-specific connections. Does not certify the complete LC250 configuration.","purpose":"installation","official":true,"checked":"2026-10-28"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-morr-quad125","slug":"morrflate-braided-quad-up-to-125-in","path":"/products/morrflate-braided-quad-up-to-125-in","name":"MORRFlate Braided Quad · up to 125 in","brand":"MORRFlate","brandPath":"/brands/morrflate","category":"air","categorySlug":"onboard-air","addedOn":"2026-10-28","defaultIndex":0,"variants":[{"id":"acc-morr-quad125","name":"MORRFlate Braided Quad · up to 125 in","brand":"MORRFLATE","sku":"MFQ","price":215,"source":"https://morrflate.com/products/morrflate-braided-quad-4-tire-hose-kit-up-to-125-wheelbase?variant=44424280440915","offers":[{"seller":"MORRFLATE","price":215,"url":"https://morrflate.com/products/morrflate-braided-quad-4-tire-hose-kit-up-to-125-wheelbase?variant=44424280440915"}],"slot":"airkit","cat":"air","subcat":"Inflation hoses","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Braided Quad · up to 125 in wheelbase","available":false,"manufacturerHours":false,"gross":null,"weight":null,"weightVerified":false,"image":"morr-quad125","deps":[],"checks":[{"label":"Compatible air source / adapters","status":"check","detail":"Verify compressor coupling, heat-rated outlet and any extensions; compatible MORRFlate/ARB source or approved adapter needed.","page":"air"}],"hmin":0,"hmax":0,"desc":"Portable four-tire inflation/deflation hose kit; compressor and source-location extensions are separate.","specs":"Up to 125 in wheelbase with air source centered at front/rear or vehicle side · four tire connections · industrial-style coupling; verify routing.","includes":"Selected braided Quad hose/manifold kit with listed fittings and dust caps. Compressor, source extensions and brand-specific adapters extra.","fitment":"Universal hose kit. Measure LC250 hose path and source location; nominal wheelbase alone does not establish hose reach. Confirm tire-valve access and coupling.","explain":"Manufacturer currently reports hose kits out of stock pending parts. Confirm availability before buying a compressor that needs the multi-tire kit. Viair/other fittings can require separate adapters; do not assume universal coupling.","recommendation":"Supporting equipment for the TenSix or another approved air source when four-tire inflation is desired; check supply and reach before purchase.","weightBasis":"Exact hose kit mass not verified; do not treat packaging weight or unknown mass as zero.","laborScope":"Portable kit with no permanent vehicle installation: 0 professional install hours. Recurring hookup/setup is not installation labor; permanent outlet work requires its own quote.","basisUrl":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/regular-hose-kit-instructions.pdf?v=1775835514","imageSource":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/Quad-Main-Updated-scaled.jpg?v=1775851317","label":"Braided Quad · up to 125 in wheelbase","choice":null,"url":"/products/morrflate-braided-quad-up-to-125-in","priceAmount":215,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal hose kit. Measure LC250 hose path and source location; nominal wheelbase alone does not establish hose reach. Confirm tire-valve access and coupling.","installHours":[0,0],"installBasis":"Portable kit with no permanent vehicle installation: 0 professional install hours. Recurring hookup/setup is not installation labor; permanent outlet work requires its own quote.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected braided Quad hose/manifold kit with listed fittings and dust caps. Compressor, source extensions and brand-specific adapters extra."},{"label":"Compatible air source / adapters","status":"check","detail":"Verify compressor coupling, heat-rated outlet and any extensions; compatible MORRFlate/ARB source or approved adapter needed.","page":"air"},{"label":"Installation / compatibility notes","status":"check","detail":"Manufacturer currently reports hose kits out of stock pending parts. Confirm availability before buying a compressor that needs the multi-tire kit. Viair/other fittings can require separate adapters; do not assume universal coupling."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"manual-morr-quad","productIds":["acc-morr-quad125"],"type":"manual","title":"MORRFlate regular hose-kit instructions","url":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/regular-hose-kit-instructions.pdf?v=1775835514","source":"https://cdn.shopify.com/s/files/1/0707/3769/0707/files/regular-hose-kit-instructions.pdf?v=1775835514","publisher":"MORRFlate","scope":"Manufacturer hose-kit family · confirm braided-kit revision","match":"family","note":"Confirm current supplied revision and vehicle-specific connections. Does not certify the complete LC250 configuration.","purpose":"installation","official":true,"checked":"2026-10-28"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-arb-manifold","slug":"arb-remote-manifold-kit","path":"/products/arb-remote-manifold-kit","name":"ARB remote manifold kit","brand":"ARB","brandPath":"/brands/arb","category":"air","categorySlug":"onboard-air","addedOn":"2026-10-28","defaultIndex":0,"variants":[{"id":"acc-arb-manifold","name":"ARB remote manifold kit","brand":"ARB","sku":"171503","price":99.95,"source":"https://sleeoffroad.com/products/171503/","offers":[{"seller":"ARB","price":99.95,"url":"https://sleeoffroad.com/products/171503/"}],"slot":"air-manifold","cat":"air","subcat":"Manifolds","realAccessory":true,"icon":"◉","checked":"October 28, 2026 (America/Denver)","variant":"Exact selected SKU","available":true,"manufacturerHours":false,"gross":1.1,"weight":1.1,"weightVerified":true,"image":null,"deps":[{"label":"Compatible ARB onboard compressor","ids":["acc-arb-twin","acc-arb-brushless"],"note":"Confirm matched ARB compressor and remote hose/fitting layout.","page":"air"}],"checks":[],"hmin":0.5,"hmax":1.5,"laborGroup":"Onboard air · mounting / wiring / plumbing","weightIncomplete":true,"desc":"Remote manifold, brackets and cooling connection hose for compatible ARB onboard-air installations.","specs":"150 psi working pressure · multiple accessory/solenoid ports · supplier item mass 1.1 lb; 4 lb is shipping weight.","includes":"Manifold, mounting brackets, connection hose and hardware. Compressor, locker solenoids, inflation hose and vehicle-specific bracket extra.","fitment":"Universal ARB component; SLEE recommends it with twin compressors on SOK2105. Confirm exact US LC250 installation, fitment and fittings.","explain":"Provides remote plumbing and cooling-hose routing; not an air locker or complete onboard-air system. Confirm threads/sealing, support, heat clearance and leak testing.","recommendation":"Consider with SLEE’s documented twin-compressor layout; avoid duplicate remote plumbing if your installer supplies another approved arrangement.","weightBasis":"Supplier distinguishes 1.1 lb item weight from 4 lb shipping weight. Added hoses/supporting hardware outside kit remain incomplete.","basis":"Researched 0.5–1.5 hour professional allowance for mounting, fittings, hose routing and leak checks based on the documented component scope. Shared within the onboard-air job when installing together; no exact LC250 maker hours verified.","basisUrl":"https://sleeoffroad.com/products/171503/","label":"Exact selected SKU","choice":null,"url":"/products/arb-remote-manifold-kit","priceAmount":99.95,"priceBasis":"selected configuration","sourceChecked":"October 28, 2026 (America/Denver)","fitmentText":"Universal ARB component; SLEE recommends it with twin compressors on SOK2105. Confirm exact US LC250 installation, fitment and fittings.","installHours":[0.5,1.5],"installBasis":"Researched 0.5–1.5 hour professional allowance for mounting, fittings, hose routing and leak checks based on the documented component scope. Shared within the onboard-air job when installing together; no exact LC250 maker hours verified.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Manifold, mounting brackets, connection hose and hardware. Compressor, locker solenoids, inflation hose and vehicle-specific bracket extra."},{"label":"Compatible ARB onboard compressor","status":"check","detail":"Confirm matched ARB compressor and remote hose/fitting layout.","page":"air"},{"label":"Installation / compatibility notes","status":"check","detail":"Provides remote plumbing and cooling-hose routing; not an air locker or complete onboard-air system. Confirm threads/sealing, support, heat clearance and leak testing."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-slee-airline-reindex","productIds":["acc-arb-brushless","acc-arb-manifold"],"type":"video","title":"Re-indexing ARB air-line crimped fittings","url":"https://www.youtube.com/watch?v=W8JMu1IzFrM","source":"https://sleeoffroad.com/products/sok2105/","publisher":"SLEE-linked video · uploader not verified","scope":"Supplier installation subtask · air-line fitting orientation","match":"component","note":"Linked by SLEE for its compressor mount; only fitting orientation, not a full compressor/manifold installation or LC250 electrical guide.","purpose":"installation","official":false,"checked":"2026-10-28","manufacturerLinked":true,"creator":"SLEE-linked video · uploader not verified"}],"reviews":[],"clearance":null}]},{"id":"budbuilt-lc250-step","slug":"budbuilt-lc250-step-sliders","path":"/products/budbuilt-lc250-step-sliders","name":"BudBuilt LC250 Step Sliders","brand":"BUDBUILT","brandPath":"/brands/budbuilt","category":"steps","categorySlug":"steps-and-rock-sliders","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-budbuilt-step-raw-none","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanding required / No fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanding required / No fill plates","price":1284,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1284,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":126,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · No fill plates · Bare metal · sanding required.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 126 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanding required / No fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-raw-none","priceAmount":1284,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-raw-diamond","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanding required / Diamond fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanding required / Diamond fill plates","price":1449,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1449,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":154,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Diamond fill plates · Bare metal · sanding required.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 154 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanding required / Diamond fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-raw-diamond","priceAmount":1449,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-raw-dimpleup","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanding required / Dimple Die Up fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanding required / Dimple Die Up fill plates","price":1449,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1449,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Up fill plates · Bare metal · sanding required.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanding required / Dimple Die Up fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-raw-dimpleup","priceAmount":1449,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-raw-dimpledown","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanding required / Dimple Die Down fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanding required / Dimple Die Down fill plates","price":1449,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1449,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Down fill plates · Bare metal · sanding required.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanding required / Dimple Die Down fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-raw-dimpledown","priceAmount":1449,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-prepped-none","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanded/prepped / No fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanded/prepped / No fill plates","price":1344,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1344,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":126,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · No fill plates · Bare metal · sanded/prepped.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 126 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanded/prepped / No fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-prepped-none","priceAmount":1344,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-prepped-diamond","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanded/prepped / Diamond fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanded/prepped / Diamond fill plates","price":1509,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1509,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":154,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Diamond fill plates · Bare metal · sanded/prepped.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 154 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanded/prepped / Diamond fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-prepped-diamond","priceAmount":1509,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-prepped-dimpleup","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanded/prepped / Dimple Die Up fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanded/prepped / Dimple Die Up fill plates","price":1509,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1509,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Up fill plates · Bare metal · sanded/prepped.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanded/prepped / Dimple Die Up fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-prepped-dimpleup","priceAmount":1509,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-prepped-dimpledown","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Bare metal · sanded/prepped / Dimple Die Down fill plates","sku":"LC250 STEPSLDR-2","variant":"Bare metal · sanded/prepped / Dimple Die Down fill plates","price":1509,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1509,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Down fill plates · Bare metal · sanded/prepped.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Bare metal · sanded/prepped / Dimple Die Down fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-prepped-dimpledown","priceAmount":1509,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-black-none","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Textured black powder coat / No fill plates","sku":"LC250 STEPSLDR-2","variant":"Textured black powder coat / No fill plates","price":1537,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1537,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":126,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · No fill plates · Textured black powder coat.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 126 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Textured black powder coat / No fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-black-none","priceAmount":1537,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-black-diamond","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Textured black powder coat / Diamond fill plates","sku":"LC250 STEPSLDR-2","variant":"Textured black powder coat / Diamond fill plates","price":1702,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1702,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":154,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Diamond fill plates · Textured black powder coat.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 154 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Textured black powder coat / Diamond fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-black-diamond","priceAmount":1702,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-black-dimpleup","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Textured black powder coat / Dimple Die Up fill plates","sku":"LC250 STEPSLDR-2","variant":"Textured black powder coat / Dimple Die Up fill plates","price":1702,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1702,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Up fill plates · Textured black powder coat.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Textured black powder coat / Dimple Die Up fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-black-dimpleup","priceAmount":1702,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null},{"id":"acc-budbuilt-step-black-dimpledown","brand":"BUDBUILT","name":"BudBuilt LC250 Step Sliders · Textured black powder coat / Dimple Die Down fill plates","sku":"LC250 STEPSLDR-2","variant":"Textured black powder coat / Dimple Die Down fill plates","price":1702,"priceNote":"Base pair $1,284 + listed finish / fill-plate add-ons; select matching options at supplier.","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","offers":[{"seller":"BudBuilt · configure listed options","price":1702,"url":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html"}],"cat":"steps","subcat":"Rock sliders","slot":"side","realAccessory":true,"icon":"▰","checked":"October 29, 2026 (America/Denver)","manufacturerHours":false,"gross":150,"weight":null,"weightVerified":false,"image":null,"available":true,"hmin":2,"hmax":4,"desc":"Frame-mounted LC250 slider pair with a level 0-degree outer tube for entry and rocker protection.","specs":"Sold as pair · DOM steel · 0° step profile · no-drill / no-weld mounting · Dimple Die Down fill plates · Textured black powder coat.","includes":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate.","fitment":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","explain":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time.","recommendation":"A step-oriented slider alternative for users who want a level entry surface; compare weight and tread-plate traction with other frame-mounted sliders.","weightBasis":"Manufacturer lists 126 lb pair without plates; +24 lb dimple or +28 lb diamond plates gives 150 lb reference product mass. Coating/hardware basis and removed factory parts are not fully reconciled; net added weight remains pending.","basis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","basisUrl":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","deps":[],"checks":[{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"}],"label":"Textured black powder coat / Dimple Die Down fill plates","choice":null,"url":"/products/budbuilt-lc250-step-sliders?variant=acc-budbuilt-step-black-dimpledown","priceAmount":1702,"priceBasis":"selected pair / package","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer LC250 product heading/description says 2024+. Confirm US year/grade/VIN and running-board/underbody clearance. Page also contains LC200 photo/video references; those are not exact LC250 evidence.","installHours":[2,4],"installBasis":"Research-based 2–4 hour professional planning allowance for removing existing steps as required, safely supporting the pair, aligning/clamping frame plates, fastening and clearance/torque checks. Manufacturer gives no verified numeric LC250 hours; painting/custom fit work extra. Its linked LC200 install video is a family procedure reference only.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Pair of sliders with selected fill plates/finish and listed mounting hardware. Paint/coating for bare metal and any vehicle-specific extra work are separate."},{"label":"Exact LC250 installation / hardware","status":"check","detail":"Request current LC250-specific instructions and hardware confirmation. The manufacturer-linked LC200 video is not a torque/fitment specification for this LC250 SKU.","page":"steps"},{"label":"Corrosion protection and finish lead time","status":"conditional","detail":"Bare options still need painting/coating; confirm cost and time separately. Powder-coating lead times and custom color choices require supplier confirmation.","page":"steps"},{"label":"Installation / compatibility notes","status":"check","detail":"Remove conflicting original steps as needed; confirm frame clamps, body/underbody clearances and fasteners. Bare metal requires corrosion protection. Other custom colors are supplier-configured and not listed here. Ask BudBuilt to confirm current availability/finish lead time."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[],"videos":[{"id":"video-budbuilt-step-reference","productIds":["acc-budbuilt-step-raw-none","acc-budbuilt-step-raw-diamond","acc-budbuilt-step-raw-dimpleup","acc-budbuilt-step-raw-dimpledown","acc-budbuilt-step-prepped-none","acc-budbuilt-step-prepped-diamond","acc-budbuilt-step-prepped-dimpleup","acc-budbuilt-step-prepped-dimpledown","acc-budbuilt-step-black-none","acc-budbuilt-step-black-diamond","acc-budbuilt-step-black-dimpleup","acc-budbuilt-step-black-dimpledown"],"type":"video","title":"BudBuilt LC200 slider installation · different vehicle reference","url":"https://www.youtube.com/watch?v=59oQE3_ioRk","source":"https://budbuilt.com/Step-Sliders-2024-LC250_p_837.html","publisher":"BudBuilt-linked video","scope":"Manufacturer-linked family process · LC200, not LC250","note":"Only a reference for mounting workflow. Obtain current LC250-specific hardware, clearances and torque instructions; no exact fitment or procedure inferred.","purpose":"installation","match":"family","official":false,"manufacturerLinked":true,"checked":"2026-10-29","creator":"BudBuilt-linked video"}],"reviews":[],"clearance":null}]},{"id":"rigd-ultraswing","slug":"rigd-ultraswing-short-fit","path":"/products/rigd-ultraswing-short-fit","name":"RIGd UltraSwing Short-Fit","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-ultraswing-0","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd UltraSwing Short-Fit","slot":"carrier","modelId":"rigd-ultraswing","brand":"RIGd Supply","sku":"49-01MF","variant":"Multi-Fit 5x4.5, 5×5, 5×5.5, 6x4.5, 6×5.5, 5x100, 5x110, 5x120, 5x130, 5x150, 6x120, 6x135","source":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=45293719355612","price":1699,"image":"rigd-rigd-ultraswing-short-fit-spare-tire-hitch-mount","gross":null,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Short-hitch swing-out spare carrier with a separate accessory receiver.","specs":"Up to 35-inch tire; current guide: 275 lb total / 150 lb severe off-road; secondary receiver 150 lb. Product page says 65 lb with plate, current guide uses 75 lb: mass unresolved.","includes":"Selected wheel plate (unless no-plate option), carrier and included license-plate light kit. 5/8-inch hitch pin, spare, bike rack and adapters extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1699,"url":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=45293719355612"},{"seller":"Sherpa Equipment Co.","price":1699,"url":"https://sherpaec.com/products/ultraswing%C2%AE-short-fit-spare-tire-hitch-mount-rigd-supply?variant=48016269476095"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Multi-Fit wheel plate · verify 6×139.7 / wheel clearance","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Multi-Fit wheel plate · verify 6×139.7 / wheel clearance","choice":null,"url":"/products/rigd-ultraswing-short-fit?variant=acc-rigd-ultraswing-0","priceAmount":1699,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1,2],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected wheel plate (unless no-plate option), carrier and included license-plate light kit. 5/8-inch hitch pin, spare, bike rack and adapters extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 5/8-inch retention pin","status":"check","detail":"Use an existing correct pin or add a verified 5/8-inch pin with sufficient usable span. Anti-wobble wedge is not retention.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"manual","title":"UltraSwing INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/UltraSwing_INSTALLATION_GUIDE.pdf?v=1792431465","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Current guide lists 275 lb total and 150 lb severe-off-road limit; uses 75 lb carrier versus product page 65 lb. Confirm exact selected unit mass/revision; do not treat towing rating as vehicle limit.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-short-fit-template","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"guide","title":"UltraSwing Short-Fit dimensional fitment template","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/ULTRA_SWING_SHORT_FIT.pdf?v=1717105854","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Dimensional check only. Print at correct scale and verify receiver, bumper and hatch. This does not certify LC250 year/grade fitment.","purpose":"fitment","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"UltraSwing® Install Guide","url":"https://www.youtube.com/watch?v=Mric6c3gP3Q","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official current UltraSwing installation; generic platform, not exact LC250 vehicle approval.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-plate","productIds":["acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"License Plate Lights for UltraSwing","url":"https://www.youtube.com/watch?v=0SkqA1zTVLA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official plate-light family reference. Cable routing and exact bracket differ by selected kit.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ultraswing-1","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd UltraSwing Short-Fit","slot":"carrier","modelId":"rigd-ultraswing","brand":"RIGd Supply","sku":"49-01RIV","variant":"Multi-L (positive off-set wheels)","source":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=46837904802012","price":1699,"image":"rigd-rigd-ultraswing-short-fit-spare-tire-hitch-mount","gross":null,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Short-hitch swing-out spare carrier with a separate accessory receiver.","specs":"Up to 35-inch tire; current guide: 275 lb total / 150 lb severe off-road; secondary receiver 150 lb. Product page says 65 lb with plate, current guide uses 75 lb: mass unresolved.","includes":"Selected wheel plate (unless no-plate option), carrier and included license-plate light kit. 5/8-inch hitch pin, spare, bike rack and adapters extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1699,"url":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=46837904802012"},{"seller":"Sherpa Equipment Co.","price":1699,"url":"https://sherpaec.com/products/ultraswing%C2%AE-short-fit-spare-tire-hitch-mount-rigd-supply?variant=48016269508863"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Multi-L wheel plate · positive-offset clearance must be confirmed","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Multi-L wheel plate · positive-offset clearance must be confirmed","choice":null,"url":"/products/rigd-ultraswing-short-fit?variant=acc-rigd-ultraswing-1","priceAmount":1699,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1,2],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected wheel plate (unless no-plate option), carrier and included license-plate light kit. 5/8-inch hitch pin, spare, bike rack and adapters extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 5/8-inch retention pin","status":"check","detail":"Use an existing correct pin or add a verified 5/8-inch pin with sufficient usable span. Anti-wobble wedge is not retention.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"manual","title":"UltraSwing INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/UltraSwing_INSTALLATION_GUIDE.pdf?v=1792431465","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Current guide lists 275 lb total and 150 lb severe-off-road limit; uses 75 lb carrier versus product page 65 lb. Confirm exact selected unit mass/revision; do not treat towing rating as vehicle limit.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-short-fit-template","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"guide","title":"UltraSwing Short-Fit dimensional fitment template","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/ULTRA_SWING_SHORT_FIT.pdf?v=1717105854","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Dimensional check only. Print at correct scale and verify receiver, bumper and hatch. This does not certify LC250 year/grade fitment.","purpose":"fitment","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"UltraSwing® Install Guide","url":"https://www.youtube.com/watch?v=Mric6c3gP3Q","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official current UltraSwing installation; generic platform, not exact LC250 vehicle approval.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-plate","productIds":["acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"License Plate Lights for UltraSwing","url":"https://www.youtube.com/watch?v=0SkqA1zTVLA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official plate-light family reference. Cable routing and exact bracket differ by selected kit.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ultraswing-2","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd UltraSwing Short-Fit","slot":"carrier","modelId":"rigd-ultraswing","brand":"RIGd Supply","sku":"49-01NO","variant":"Without Wheel Plate (-$80).","source":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=31245224443977","price":1619,"image":"rigd-rigd-ultraswing-short-fit-spare-tire-hitch-mount","gross":null,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Short-hitch swing-out spare carrier with a separate accessory receiver.","specs":"Up to 35-inch tire; current guide: 275 lb total / 150 lb severe off-road; secondary receiver 150 lb. Product page says 65 lb with plate, current guide uses 75 lb: mass unresolved.","includes":"Carrier and included plate-light kit; wheel plate, its complete hardware, spare and 5/8-inch hitch pin extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1619,"url":"https://www.rigdsupply.com/products/rigd-ultraswing-short-fit-spare-tire-hitch-mount?variant=31245224443977"},{"seller":"Sherpa Equipment Co.","price":1619,"url":"https://sherpaec.com/products/ultraswing%C2%AE-short-fit-spare-tire-hitch-mount-rigd-supply?variant=48016269541631"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"No wheel plate · cannot carry spare until completed","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"No wheel plate · cannot carry spare until completed","choice":null,"url":"/products/rigd-ultraswing-short-fit?variant=acc-rigd-ultraswing-2","priceAmount":1619,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1,2],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Carrier and included plate-light kit; wheel plate, its complete hardware, spare and 5/8-inch hitch pin extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 5/8-inch retention pin","status":"check","detail":"Use an existing correct pin or add a verified 5/8-inch pin with sufficient usable span. Anti-wobble wedge is not retention.","page":"body"},{"label":"Wheel plate and complete spare-mount hardware","status":"quote","detail":"This option cannot carry a spare as supplied. Request the exact compatible plate/hardware and price before purchase.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not compatible with vertical bike racks. WobNot must never extend the carrier itself. Lower receiver tow rating is not Toyota towing capacity. RIGd Short-Fit measurements: pin-to-face <=2 in; bumper projection <=4 in; hatch height >=7.75 in; open hitch contact >=3.5 in / closed insertion >=4.25 in; confirm guide revision."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"manual","title":"UltraSwing INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/UltraSwing_INSTALLATION_GUIDE.pdf?v=1792431465","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Current guide lists 275 lb total and 150 lb severe-off-road limit; uses 75 lb carrier versus product page 65 lb. Confirm exact selected unit mass/revision; do not treat towing rating as vehicle limit.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-short-fit-template","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"guide","title":"UltraSwing Short-Fit dimensional fitment template","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/ULTRA_SWING_SHORT_FIT.pdf?v=1717105854","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Dimensional check only. Print at correct scale and verify receiver, bumper and hatch. This does not certify LC250 year/grade fitment.","purpose":"fitment","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-ultraswing","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"UltraSwing® Install Guide","url":"https://www.youtube.com/watch?v=Mric6c3gP3Q","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official current UltraSwing installation; generic platform, not exact LC250 vehicle approval.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-plate","productIds":["acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"License Plate Lights for UltraSwing","url":"https://www.youtube.com/watch?v=0SkqA1zTVLA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official plate-light family reference. Cable routing and exact bracket differ by selected kit.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"rigd-rambleswing","slug":"rigd-rambleswing-pro","path":"/products/rigd-rambleswing-pro","name":"RIGd RambleSwing Pro","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"bumpers","categorySlug":"bumpers-and-recovery","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-rambleswing-3","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd RambleSwing Pro","slot":"carrier","modelId":"rigd-rambleswing","brand":"RIGd Supply","sku":"RMBL-SWNGPRO-SHRT","variant":"2\" Short-Fit (For stubby hitches found on newer Toyotas, Subarus, etc.)","source":"https://www.rigdsupply.com/products/rambleswing-pro-1?variant=46459058421980","price":949,"image":"rigd-rambleswing-pro-1","gross":74,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Reversible swing-out platform for a separately purchased rack or cargo accessory.","specs":"2-inch Short-Fit or adjustable Mid-Fit; 350 lb swing-arm limit; no towing; manufacturer 74 lb base unit. Vertical bike limit 150 lb bikes plus separate rack mass within total limit.","includes":"Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-pro-1","weightBasis":"Manufacturer product mass 74 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":949,"url":"https://www.rigdsupply.com/products/rambleswing-pro-1?variant=46459058421980"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"2-inch Short-Fit · base platform","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"2-inch Short-Fit · base platform","choice":null,"url":"/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-3","priceAmount":949,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1,2],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 1/2-inch retention pin","status":"check","detail":"Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"RambleSwing Pro INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"How to install the RambleSwing®Pro","url":"https://www.youtube.com/watch?v=kWPUsC6OKa8","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official base platform installation; complete spare bundle still needs post and wheel-plate steps.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-rambleswing-0","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd RambleSwing Pro","slot":"carrier","modelId":"rigd-rambleswing","brand":"RIGd Supply","sku":"RMBL-SWNGPRO","variant":"2\" Mid-Fit (Adjustable to fit almost anything)","source":"https://www.rigdsupply.com/products/rambleswing-pro-1?variant=46459058356444","price":949,"image":"rigd-rambleswing-pro-1","gross":74,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"desc":"Reversible swing-out platform for a separately purchased rack or cargo accessory.","specs":"2-inch Short-Fit or adjustable Mid-Fit; 350 lb swing-arm limit; no towing; manufacturer 74 lb base unit. Vertical bike limit 150 lb bikes plus separate rack mass within total limit.","includes":"Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-pro-1","weightBasis":"Manufacturer product mass 74 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":949,"url":"https://www.rigdsupply.com/products/rambleswing-pro-1?variant=46459058356444"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"2-inch Mid-Fit · base, verify dimensions","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"2-inch Mid-Fit · base, verify dimensions","choice":null,"url":"/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-0","priceAmount":949,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1,2],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 1/2-inch retention pin","status":"check","detail":"Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"RambleSwing Pro INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"How to install the RambleSwing®Pro","url":"https://www.youtube.com/watch?v=kWPUsC6OKa8","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official base platform installation; complete spare bundle still needs post and wheel-plate steps.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-rambleswing-bundle-3","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd RambleSwing Pro spare-tire bundle","slot":"carrier","modelId":"rigd-rambleswing-bundle","brand":"RIGd Supply","sku":"39-018L","variant":"2\" Short-Fit (For stubby hitches found on newer Toyotas, Subarus, etc.)","source":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount?variant=47373648953564","price":1299,"image":"rigd-rambleswing-pro-tire-mount","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":3,"desc":"Complete manufacturer bundle adds an offset post and spare mount to RambleSwing Pro.","specs":"350 lb arm total; tire mount up to 150 lb; 74 lb figure is base arm only, NOT complete bundle mass.","includes":"RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1299,"url":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount?variant=47373648953564"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"2-inch Short-Fit · with post + spare mount","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdSpareBundle":true,"label":"2-inch Short-Fit · with post + spare mount","choice":null,"url":"/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-3","priceAmount":1299,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1.5,3],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 1/2-inch retention pin","status":"check","detail":"Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"RambleSwing Pro INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-manual-rambleswing-spare","productIds":["acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"manual","title":"RambleSwing Pro Tire Carrier INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_Tire_Carrier_INSTALLATION_GUIDE.pdf?v=1792431462","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Covers base arm, post and spare-mount steps; separate mount listing is only one component. Verify exact post geometry and rating.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-manual-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"Hitching Post Install Assy 7-30-25","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Centered-post drawing / hardware reference; offset post and revised hardware need confirmation.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"How to install the RambleSwing®Pro","url":"https://www.youtube.com/watch?v=kWPUsC6OKa8","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official base platform installation; complete spare bundle still needs post and wheel-plate steps.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"Hitching Post Install Video","url":"https://www.youtube.com/watch?v=QLlCJWtmEyo","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official post installation; confirm centered / offset geometry and hardware revision.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-rambleswing-bundle-0","cat":"bumpers","subcat":"Hitch carriers","name":"RIGd RambleSwing Pro spare-tire bundle","slot":"carrier","modelId":"rigd-rambleswing-bundle","brand":"RIGd Supply","sku":"39-028L","variant":"2\" Mid-Fit (Adjustable to fit almost anything)","source":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount?variant=47373572702428","price":1299,"image":"rigd-rambleswing-pro-tire-mount","gross":null,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":3,"desc":"Complete manufacturer bundle adds an offset post and spare mount to RambleSwing Pro.","specs":"350 lb arm total; tire mount up to 150 lb; 74 lb figure is base arm only, NOT complete bundle mass.","includes":"RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1299,"url":"https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount?variant=47373572702428"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"2-inch Mid-Fit · with post + spare mount, verify dimensions","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdSpareBundle":true,"label":"2-inch Mid-Fit · with post + spare mount, verify dimensions","choice":null,"url":"/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-0","priceAmount":1299,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[1.5,3],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Correct 1/2-inch retention pin","status":"check","detail":"Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"RambleSwing Pro INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-manual-rambleswing-spare","productIds":["acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"manual","title":"RambleSwing Pro Tire Carrier INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_Tire_Carrier_INSTALLATION_GUIDE.pdf?v=1792431462","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Covers base arm, post and spare-mount steps; separate mount listing is only one component. Verify exact post geometry and rating.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-manual-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"Hitching Post Install Assy 7-30-25","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Centered-post drawing / hardware reference; offset post and revised hardware need confirmation.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rambleswing","productIds":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"How to install the RambleSwing®Pro","url":"https://www.youtube.com/watch?v=kWPUsC6OKa8","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official base platform installation; complete spare bundle still needs post and wheel-plate steps.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"Hitching Post Install Video","url":"https://www.youtube.com/watch?v=QLlCJWtmEyo","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official post installation; confirm centered / offset geometry and hardware revision.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"},{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"rigd-ramblerack","slug":"rigd-ramblerack-bike-rack","path":"/products/rigd-ramblerack-bike-rack","name":"RIGd RambleRack bike rack","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-ramblerack-0","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack bike rack","slot":"rigd-ramblerack","modelId":"rigd-ramblerack","brand":"RIGd Supply","sku":"RMBL-RCK-1SHRT","variant":"Single Bike / Short Stinger (for RambleSwing Pro)","source":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160115932","price":799,"image":"rigd-rigd-ramblerack-1-heavy-duty-hitch-bike-rack","gross":null,"weight":null,"weightVerified":false,"hmin":0.75,"hmax":1.5,"desc":"Steel bike tray system with platform-specific stinger choices.","specs":"Bike wheels 22–29 in, wheelbase 39–52 in, tires <=5 in; published per-bike terrain ratings 150 lb road / 100 fire road / 75 moderate / 50 extreme. Single rack reference 46 lb; exact stinger / two-bike masses unverified.","includes":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":799,"url":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160115932"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdRackBikes":1,"rigdTrayOnly":false,"label":"Single Bike / Short Stinger (for RambleSwing Pro)","choice":null,"url":"/products/rigd-ramblerack-bike-rack?variant=acc-rigd-ramblerack-0","priceAmount":799,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.75,1.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ramblerack-1","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack bike rack","slot":"rigd-ramblerack","modelId":"rigd-ramblerack","brand":"RIGd Supply","sku":"RMBL-RCK-1","variant":"Single Bike / Long Stinger (for UltraSwing)","source":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160083164","price":799,"image":"rigd-rigd-ramblerack-1-heavy-duty-hitch-bike-rack","gross":null,"weight":null,"weightVerified":false,"hmin":0.75,"hmax":1.5,"desc":"Steel bike tray system with platform-specific stinger choices.","specs":"Bike wheels 22–29 in, wheelbase 39–52 in, tires <=5 in; published per-bike terrain ratings 150 lb road / 100 fire road / 75 moderate / 50 extreme. Single rack reference 46 lb; exact stinger / two-bike masses unverified.","includes":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":799,"url":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160083164"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdRackBikes":1,"rigdTrayOnly":false,"label":"Single Bike / Long Stinger (for UltraSwing)","choice":null,"url":"/products/rigd-ramblerack-bike-rack?variant=acc-rigd-ramblerack-1","priceAmount":799,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.75,1.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ramblerack-2","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack bike rack","slot":"rigd-ramblerack","modelId":"rigd-ramblerack","brand":"RIGd Supply","sku":"RMBL-RCK-T","variant":"Single Bike / Tray Only","source":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160214236","price":699,"image":"rigd-rigd-ramblerack-1-heavy-duty-hitch-bike-rack","gross":null,"weight":null,"weightVerified":false,"hmin":0.75,"hmax":1.5,"desc":"Steel bike tray system with platform-specific stinger choices.","specs":"Bike wheels 22–29 in, wheelbase 39–52 in, tires <=5 in; published per-bike terrain ratings 150 lb road / 100 fire road / 75 moderate / 50 extreme. Single rack reference 46 lb; exact stinger / two-bike masses unverified.","includes":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":699,"url":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160214236"}],"available":true,"deps":[{"label":"Compatible tray stinger / channel mount","ids":[],"slots":[],"note":"Tray-only does not include a hitch stinger. Confirm Short/Long Stinger or Channel Mount and complete hardware.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Single bike · tray only, mount extra","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdRackBikes":1,"rigdTrayOnly":true,"label":"Single bike · tray only, mount extra","choice":null,"url":"/products/rigd-ramblerack-bike-rack?variant=acc-rigd-ramblerack-2","priceAmount":699,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.75,1.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate."},{"label":"Compatible tray stinger / channel mount","status":"check","detail":"Tray-only does not include a hitch stinger. Confirm Short/Long Stinger or Channel Mount and complete hardware.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Tray stinger / channel mounting hardware","status":"check","detail":"Tray-only does not include a stinger. Confirm a compatible Short/Long Stinger or Channel Mount.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ramblerack-3","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack bike rack","slot":"rigd-ramblerack","modelId":"rigd-ramblerack","brand":"RIGd Supply","sku":"RMBL-RCK-2SHRT","variant":"2-Bike / Short Stinger (for RambleSwing Pro)","source":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160279772","price":1499,"image":"rigd-rigd-ramblerack-1-heavy-duty-hitch-bike-rack","gross":null,"weight":null,"weightVerified":false,"hmin":0.75,"hmax":1.5,"desc":"Steel bike tray system with platform-specific stinger choices.","specs":"Bike wheels 22–29 in, wheelbase 39–52 in, tires <=5 in; published per-bike terrain ratings 150 lb road / 100 fire road / 75 moderate / 50 extreme. Single rack reference 46 lb; exact stinger / two-bike masses unverified.","includes":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1499,"url":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160279772"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdRackBikes":2,"rigdTrayOnly":false,"label":"2-Bike / Short Stinger (for RambleSwing Pro)","choice":null,"url":"/products/rigd-ramblerack-bike-rack?variant=acc-rigd-ramblerack-3","priceAmount":1499,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.75,1.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-ramblerack-4","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack bike rack","slot":"rigd-ramblerack","modelId":"rigd-ramblerack","brand":"RIGd Supply","sku":"RMBL-RCK-2","variant":"2-Bike / Long Stinger (for UltraSwing)","source":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160247004","price":1499,"image":"rigd-rigd-ramblerack-1-heavy-duty-hitch-bike-rack","gross":null,"weight":null,"weightVerified":false,"hmin":0.75,"hmax":1.5,"desc":"Steel bike tray system with platform-specific stinger choices.","specs":"Bike wheels 22–29 in, wheelbase 39–52 in, tires <=5 in; published per-bike terrain ratings 150 lb road / 100 fire road / 75 moderate / 50 extreme. Single rack reference 46 lb; exact stinger / two-bike masses unverified.","includes":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":1499,"url":"https://www.rigdsupply.com/products/rigd-ramblerack-1-heavy-duty-hitch-bike-rack?variant=45538160247004"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdRackBikes":2,"rigdTrayOnly":false,"label":"2-Bike / Long Stinger (for UltraSwing)","choice":null,"url":"/products/rigd-ramblerack-bike-rack?variant=acc-rigd-ramblerack-4","priceAmount":1499,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.75,1.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected one-bike or two-bike configuration with listed stinger, or tray only. Locks and optional brake light separate."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Long Stinger is listed for UltraSwing; Short Stinger for RambleSwing Pro. Tray-only needs a compatible mount. Confirm whether terrain ratings apply to each exact configuration; bike and vehicle limits also apply."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"acc-rigd-ramblerack-addon","slug":"rigd-ramblerack-add-on","path":"/products/rigd-ramblerack-add-on","name":"RIGd RambleRack Add-On","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-ramblerack-addon","cat":"body","subcat":"Hitch bike racks","name":"RIGd RambleRack Add-On","slot":"rigd-ramblerack-addon","modelId":"rigd-ramblerack-addon","brand":"RIGd Supply","sku":"RMBL-RCK-T-2","variant":"RambleRack Add-on","source":"https://www.rigdsupply.com/products/ramblerack-t?variant=43342010941660","price":699,"image":"rigd-ramblerack-t","gross":null,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Additional bike tray for an existing compatible RambleRack.","specs":"Add-on tray; complete installed mass unverified; exact rack revision and total loaded capacity require confirmation.","includes":"One add-on assembly; base rack, bikes and locks extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not add this to a complete two-bike package unless RIGd approves the resulting configuration.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ramblerack-t","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":699,"url":"https://www.rigdsupply.com/products/ramblerack-t?variant=43342010941660"}],"available":true,"deps":[{"label":"Existing compatible RambleRack","ids":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4"],"note":"Requires a compatible base rack and approved add-on hardware; two-bike package already includes two trays.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"RambleRack Add-on","choice":null,"url":"/products/rigd-ramblerack-add-on","priceAmount":699,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"One add-on assembly; base rack, bikes and locks extra."},{"label":"Existing compatible RambleRack","status":"check","detail":"Requires a compatible base rack and approved add-on hardware; two-bike package already includes two trays.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not add this to a complete two-bike package unless RIGd approves the resulting configuration."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rack-strap","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"type":"manual","title":"RambleRack strap guide","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"rigd-ultratable","slug":"rigd-ultratable-ultratable-sl","path":"/products/rigd-ultratable-ultratable-sl","name":"RIGd UltraTable / UltraTable SL","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-table-us","cat":"roof","subcat":"Camp tables","name":"RIGd UltraTable","slot":"rigd-camp-table","modelId":"rigd-table-us","brand":"RIGd Supply","sku":"UT2145","variant":"Default Title","source":"https://www.rigdsupply.com/products/ultratable-1-drop-down-camp-table?variant=47606667411676","price":399.95,"image":"rigd-ultratable-1-drop-down-camp-table","gross":22,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Drop-down camp work surface with a platform-specific mounting bracket.","specs":"125 lb static table rating, subject to supporting structure. Surface 25.5 × 13 in; cutting board 17.5 × 12.75 in; 22 lb with bracket.","includes":"Table + all-weather sliding cutting board + mounting bracket.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ultratable-1-drop-down-camp-table","weightBasis":"Manufacturer product mass 22 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":399.95,"url":"https://www.rigdsupply.com/products/ultratable-1-drop-down-camp-table?variant=47606667411676"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"UltraSwing · sliding cutting board","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ultra","label":"UltraSwing · sliding cutting board","choice":null,"url":"/products/rigd-ultratable-ultratable-sl?variant=acc-rigd-table-us","priceAmount":399.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Table + all-weather sliding cutting board + mounting bracket."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"UltraSwing table mounting platform","status":"check","detail":"This bracket is for UltraSwing; select the RambleSwing Pro version if that is your platform.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-table-rp","cat":"roof","subcat":"Camp tables","name":"RIGd UltraTable","slot":"rigd-camp-table","modelId":"rigd-table-rp","brand":"RIGd Supply","sku":"RPUT2145","variant":"Default Title","source":"https://www.rigdsupply.com/products/rambleswing-pro-ultratable?variant=46479939993820","price":399.95,"image":"rigd-rambleswing-pro-ultratable","gross":22,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Drop-down camp work surface with a platform-specific mounting bracket.","specs":"125 lb static table rating, subject to supporting structure. Surface 25.5 × 13 in; cutting board 17.5 × 12.75 in; 22 lb with bracket.","includes":"Table + all-weather sliding cutting board + mounting bracket.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-pro-ultratable","weightBasis":"Manufacturer product mass 22 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":399.95,"url":"https://www.rigdsupply.com/products/rambleswing-pro-ultratable?variant=46479939993820"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"RambleSwing Pro / HitchingPost · sliding cutting board","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ramble","label":"RambleSwing Pro / HitchingPost · sliding cutting board","choice":null,"url":"/products/rigd-ultratable-ultratable-sl?variant=acc-rigd-table-rp","priceAmount":399.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Table + all-weather sliding cutting board + mounting bracket."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"RambleSwing Pro platform","status":"check","detail":"Requires RambleSwing Pro, not UltraSwing.","page":"bumpers"},{"label":"HitchingPost foundation","status":"check","detail":"RambleSwing table version needs a compatible HitchingPost; the spare-carrier bundle includes an offset post.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-table-sl-us","cat":"roof","subcat":"Camp tables","name":"RIGd UltraTable SL","slot":"rigd-camp-table","modelId":"rigd-table-sl-us","brand":"RIGd Supply","sku":"UT2145-SL","variant":"Default Title","source":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-ultraswing%E2%84%A2-rigd-supply?variant=67648111214812","price":299.95,"image":"rigd-ultratable-sl-for-ultraswing-rigd-supply","gross":17,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Drop-down camp work surface with a platform-specific mounting bracket.","specs":"125 lb static table rating, subject to supporting structure. Surface 25.5 × 14 in; 17 lb with bracket.","includes":"Table + bracket; no sliding cutting board.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-ultraswing%E2%84%A2-rigd-supply","weightBasis":"Manufacturer product mass 17 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":299.95,"url":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-ultraswing%E2%84%A2-rigd-supply?variant=67648111214812"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"UltraSwing · SL / no cutting board","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ultra","label":"UltraSwing · SL / no cutting board","choice":null,"url":"/products/rigd-ultratable-ultratable-sl?variant=acc-rigd-table-sl-us","priceAmount":299.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Table + bracket; no sliding cutting board."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"UltraSwing table mounting platform","status":"check","detail":"This bracket is for UltraSwing; select the RambleSwing Pro version if that is your platform.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-table-sl-rp","cat":"roof","subcat":"Camp tables","name":"RIGd UltraTable SL","slot":"rigd-camp-table","modelId":"rigd-table-sl-rp","brand":"RIGd Supply","sku":"RPUT2145-SL","variant":"Default Title","source":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-rambleswing%C2%AE-pro-rigd-supply?variant=67648522944732","price":299.95,"image":"rigd-ultratable-sl-for-rambleswing-pro-rigd-supply","gross":17,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Drop-down camp work surface with a platform-specific mounting bracket.","specs":"125 lb static table rating, subject to supporting structure. Surface 25.5 × 14 in; 17 lb with bracket.","includes":"Table + bracket; no sliding cutting board.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-rambleswing%C2%AE-pro-rigd-supply","weightBasis":"Manufacturer product mass 17 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":299.95,"url":"https://www.rigdsupply.com/products/ultratable%E2%84%A2-sl-for-rambleswing%C2%AE-pro-rigd-supply?variant=67648522944732"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"RambleSwing Pro / HitchingPost · SL / no cutting board","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ramble","label":"RambleSwing Pro / HitchingPost · SL / no cutting board","choice":null,"url":"/products/rigd-ultratable-ultratable-sl?variant=acc-rigd-table-sl-rp","priceAmount":299.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Table + bracket; no sliding cutting board."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"RambleSwing Pro platform","status":"check","detail":"Requires RambleSwing Pro, not UltraSwing.","page":"bumpers"},{"label":"HitchingPost foundation","status":"check","detail":"RambleSwing table version needs a compatible HitchingPost; the spare-carrier bundle includes an offset post.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-megatable","slug":"rigd-megatable","path":"/products/rigd-megatable","name":"RIGd MegaTable","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-megatable-us","cat":"roof","subcat":"Camp tables","name":"RIGd MegaTable","slot":"rigd-camp-table","modelId":"rigd-megatable-us","brand":"RIGd Supply","sku":"MT2145","variant":"Default Title","source":"https://www.rigdsupply.com/products/mega-table?variant=44132499194076","price":399.95,"image":"rigd-mega-table","gross":25.5,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Larger drop-down work surface for camp cooking.","specs":"Surface 34.25 × 16.25 in; closed 35 × 18 5/16 × 3.5 in; 125 lb static rating subject to support.","includes":"MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/mega-table","weightBasis":"Manufacturer product mass 25.5 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":399.95,"url":"https://www.rigdsupply.com/products/mega-table?variant=44132499194076"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"UltraSwing bracket","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ultra","label":"UltraSwing bracket","choice":null,"url":"/products/rigd-megatable?variant=acc-rigd-megatable-us","priceAmount":399.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"UltraSwing table mounting platform","status":"check","detail":"This bracket is for UltraSwing; select the RambleSwing Pro version if that is your platform.","page":"bumpers"},{"label":"Installation / compatibility notes","status":"check","detail":"UltraSwing version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-megatable-rp","cat":"roof","subcat":"Camp tables","name":"RIGd MegaTable","slot":"rigd-camp-table","modelId":"rigd-megatable-rp","brand":"RIGd Supply","sku":"RPMT2145","variant":"Default Title","source":"https://www.rigdsupply.com/products/rambleswing-pro-megatable?variant=46479940387036","price":399.95,"image":"rigd-rambleswing-pro-megatable","gross":24.875,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Larger drop-down work surface for camp cooking.","specs":"Surface 34.25 × 16.25 in; closed 35 × 18 5/16 × 3.5 in; 125 lb static rating subject to support.","includes":"MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-pro-megatable","weightBasis":"Manufacturer product mass 24.875 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":399.95,"url":"https://www.rigdsupply.com/products/rambleswing-pro-megatable?variant=46479940387036"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"RambleSwing Pro / HitchingPost bracket","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","rigdTablePlatform":"ramble","label":"RambleSwing Pro / HitchingPost bracket","choice":null,"url":"/products/rigd-megatable?variant=acc-rigd-megatable-rp","priceAmount":399.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"RambleSwing Pro platform","status":"check","detail":"Requires RambleSwing Pro, not UltraSwing.","page":"bumpers"},{"label":"HitchingPost foundation","status":"check","detail":"RambleSwing table version needs a compatible HitchingPost; the spare-carrier bundle includes an offset post.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-hitchingpost","slug":"rigd-rambleswing-pro-hitchingpost","path":"/products/rigd-rambleswing-pro-hitchingpost","name":"RIGd RambleSwing Pro HitchingPost","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-hitchingpost","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd RambleSwing Pro HitchingPost","slot":"rigd-hitchingpost","modelId":"rigd-hitchingpost","brand":"RIGd Supply","sku":"HTCH-PST","variant":"Default Title","source":"https://www.rigdsupply.com/products/hitching-post-includes-license-plate-light-kit?variant=46459137327324","price":199.95,"image":"rigd-hitching-post-includes-license-plate-light-kit","gross":null,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Vertical accessory post for RambleSwing Pro.","specs":"RambleSwing Pro only; exact current post capacity / mass require RIGd confirmation.","includes":"HitchingPost only as currently described. Wings, table, spare mount and lighting separate unless explicitly confirmed.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Legacy URL mentions a light kit, but current contents do not confirm one. Base and offset/bundle post load ratings conflict across pages: do not assume 120 lb applies to every post.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/hitching-post-includes-license-plate-light-kit","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":199.95,"url":"https://www.rigdsupply.com/products/hitching-post-includes-license-plate-light-kit?variant=46459137327324"}],"available":true,"deps":[{"label":"RambleSwing Pro platform","ids":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"Requires RambleSwing Pro, not UltraSwing. Spare-carrier bundle already includes offset post.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Centered post · base accessory foundation","choice":null,"url":"/products/rigd-rambleswing-pro-hitchingpost?variant=acc-rigd-hitchingpost","priceAmount":199.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"HitchingPost only as currently described. Wings, table, spare mount and lighting separate unless explicitly confirmed."},{"label":"RambleSwing Pro platform","status":"check","detail":"Requires RambleSwing Pro, not UltraSwing. Spare-carrier bundle already includes offset post.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Legacy URL mentions a light kit, but current contents do not confirm one. Base and offset/bundle post load ratings conflict across pages: do not assume 120 lb applies to every post."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"Hitching Post Install Assy 7-30-25","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Centered-post drawing / hardware reference; offset post and revised hardware need confirmation.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"Hitching Post Install Video","url":"https://www.youtube.com/watch?v=QLlCJWtmEyo","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official post installation; confirm centered / offset geometry and hardware revision.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-hitchingpost-offset","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd Off-Set HitchingPost","slot":"rigd-hitchingpost","modelId":"rigd-hitchingpost-offset","brand":"RIGd Supply","sku":"HTCH-PST-ST","variant":"Default Title","source":"https://www.rigdsupply.com/products/straight-hitchingpost%E2%84%A2-includes-accessory-wings?variant=46837859123420","price":149.95,"image":null,"gross":null,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Offset accessory post for a compatible RambleSwing Pro mounting stack.","specs":"Maker lists up to 37-inch tire clearance and 120 lb post rating here, while base arm page says 100 lb vertical gear; reconcile exact stack rating with RIGd.","includes":"Off-Set HitchingPost as listed; wings / lighting contents require confirmation despite legacy handle.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"Already included in the spare-carrier bundle. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/straight-hitchingpost%E2%84%A2-includes-accessory-wings","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":149.95,"url":"https://www.rigdsupply.com/products/straight-hitchingpost%E2%84%A2-includes-accessory-wings?variant=46837859123420"}],"available":true,"deps":[{"label":"RambleSwing Pro","ids":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"Requires compatible RambleSwing Pro; tire bundle already includes offset post.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"label":"Off-Set post · confirm stack capacity / contents","choice":null,"url":"/products/rigd-rambleswing-pro-hitchingpost?variant=acc-rigd-hitchingpost-offset","priceAmount":149.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Off-Set HitchingPost as listed; wings / lighting contents require confirmation despite legacy handle."},{"label":"RambleSwing Pro","status":"check","detail":"Requires compatible RambleSwing Pro; tire bundle already includes offset post.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"Already included in the spare-carrier bundle. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"manual","title":"Hitching Post Install Assy 7-30-25","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Centered-post drawing / hardware reference; offset post and revised hardware need confirmation.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-post","productIds":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"type":"video","title":"Hitching Post Install Video","url":"https://www.youtube.com/watch?v=QLlCJWtmEyo","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official post installation; confirm centered / offset geometry and hardware revision.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"acc-rigd-tire-mount","slug":"rigd-hitchingpost-tire-mount","path":"/products/rigd-hitchingpost-tire-mount","name":"RIGd HitchingPost Tire Mount","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-tire-mount","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd HitchingPost Tire Mount","slot":"rigd-tire-mount","modelId":"rigd-tire-mount","brand":"RIGd Supply","sku":"HTCH-PST-MF","variant":"Default Title","source":"https://www.rigdsupply.com/products/hitching-post-tire-mount?variant=46931164168412","price":199.95,"image":"rigd-hitching-post-tire-mount","gross":null,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Spare wheel mount for a separate compatible HitchingPost.","specs":"Supports 4/5/6/8-lug mounting; centered-post optimized 35 in, offset-post optimized 37 in. Exact bolt circle / wheel profile and complete stack rating require confirmation.","includes":"Tire mount only. Post, swing arm, wheel/tire and plate lighting extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Already included in RambleSwing spare-carrier bundle; not an UltraSwing replacement wheel plate.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/hitching-post-tire-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":199.95,"url":"https://www.rigdsupply.com/products/hitching-post-tire-mount?variant=46931164168412"}],"available":true,"deps":[{"label":"Compatible HitchingPost on RambleSwing Pro","ids":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"Requires a documented centered/offset HitchingPost and approved hardware.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-hitchingpost-tire-mount","priceAmount":199.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Tire mount only. Post, swing arm, wheel/tire and plate lighting extra."},{"label":"Compatible HitchingPost on RambleSwing Pro","status":"check","detail":"Requires a documented centered/offset HitchingPost and approved hardware.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Already included in RambleSwing spare-carrier bundle; not an UltraSwing replacement wheel plate."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-manual-rambleswing-spare","productIds":["acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"manual","title":"RambleSwing Pro Tire Carrier INSTALLATION GUIDE","url":"https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_Tire_Carrier_INSTALLATION_GUIDE.pdf?v=1792431462","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Covers base arm, post and spare-mount steps; separate mount listing is only one component. Verify exact post geometry and rating.","purpose":"installation","checked":"2026-10-29"},{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-wheel-plate","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-tire-mount"],"type":"video","title":"UltraSwing®  and RambleSwing® Pro wheel plate setup","url":"https://www.youtube.com/watch?v=fqg1wWW0its","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"acc-rigd-wings","slug":"rigd-hitchingpost-accessory-wings","path":"/products/rigd-hitchingpost-accessory-wings","name":"RIGd HitchingPost Accessory Wings","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-wings","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd HitchingPost Accessory Wings","slot":"rigd-wings","modelId":"rigd-wings","brand":"RIGd Supply","sku":"ACWNGS","variant":"Default Title","source":"https://www.rigdsupply.com/products/accessory-wings?variant=46459139719388","price":99.95,"image":"rigd-accessory-wings","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Accessory attachment wings sold as a pair.","specs":"Pair; centered and offset HitchingPost support; exact installed mass / load capacity unverified.","includes":"Two wings; post, carrier, containers and accessory fasteners as required extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/accessory-wings","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":99.95,"url":"https://www.rigdsupply.com/products/accessory-wings?variant=46459139719388"}],"available":true,"deps":[{"label":"HitchingPost","ids":["acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"Requires compatible centered or offset HitchingPost; inspect bundle contents before buying.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-hitchingpost-accessory-wings","priceAmount":99.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Two wings; post, carrier, containers and accessory fasteners as required extra."},{"label":"HitchingPost","status":"check","detail":"Requires compatible centered or offset HitchingPost; inspect bundle contents before buying.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-sidehack","slug":"rigd-sidehack","path":"/products/rigd-sidehack","name":"RIGd SideHack","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-sidehack","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd SideHack","slot":"rigd-sidehack","modelId":"rigd-sidehack","brand":"RIGd Supply","sku":"RTPA01C","variant":"Default Title","source":"https://www.rigdsupply.com/products/sidehack?variant=40826235027649","price":349.95,"image":"rigd-sidehack","gross":20,"weight":null,"weightVerified":false,"hmin":0.5,"hmax":1,"desc":"Modular UltraSwing panel for fuel, water and other gear, with or without a table.","specs":"20 lb product; 50 lb panel rating; up to 37-inch tire clearance claim is not permission to exceed Short-Fit tire rating.","includes":"SideHack and NoNuts mounting bracket. Containers, pack mount and JerryRig extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. All UltraSwing versions; not a RambleSwing Pro post. Avoid fuel above an open camp flame.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/sidehack","weightBasis":"Manufacturer product mass 20 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":349.95,"url":"https://www.rigdsupply.com/products/sidehack?variant=40826235027649"}],"available":true,"deps":[{"label":"UltraSwing","ids":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"note":"Requires an UltraSwing platform.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-sidehack","priceAmount":349.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.5,1],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"SideHack and NoNuts mounting bracket. Containers, pack mount and JerryRig extra."},{"label":"UltraSwing","status":"check","detail":"Requires an UltraSwing platform.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. All UltraSwing versions; not a RambleSwing Pro post. Avoid fuel above an open camp flame."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-sidehack","productIds":["acc-rigd-sidehack"],"type":"video","title":"RIGd Supply SideHack™ Install","url":"https://www.youtube.com/watch?v=_5Kz26YhpmY","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official SideHack installation; containers and JerryRig are separate components.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"rigd-jerryrig","slug":"rigd-jerryrig-fuel-water-mount","path":"/products/rigd-jerryrig-fuel-water-mount","name":"RIGd JerryRig fuel / water mount","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"fuel","categorySlug":"fuel-and-range","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-jerryrig-0","cat":"fuel","subcat":"External container mounts","name":"RIGd JerryRig fuel / water mount","slot":"rigd-jerryrig","modelId":"rigd-jerryrig","brand":"RIGd Supply","sku":"JR-F","variant":"Fuel","source":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249152732","price":174.95,"image":"rigd-sidehack-jerry-can-mount","gross":10,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Lockable jerry-can cradle with different upper straps for fuel and water cans.","specs":"10 lb published cradle reference; Both Straps exact mass unverified. Scepter/Wavian/LifeSaver/Midwest listed; Wavian nozzle removal required.","includes":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount","weightBasis":"Manufacturer lists 10 lb reference cradle product mass; selected strap/hardware scope and total installed addition unverified. Both Straps mass is not inferred.","offers":[{"seller":"RIGd Supply","price":174.95,"url":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249152732"}],"available":true,"deps":[{"label":"SideHack","ids":["acc-rigd-sidehack"],"note":"Requires SideHack on UltraSwing.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","eligibility":"Universal external container mount only; confirm LC250 mounting stack and local container/transport rules. No fuel container or tank capacity included.","label":"Fuel","choice":null,"url":"/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-0","priceAmount":174.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra."},{"label":"SideHack","status":"check","detail":"Requires SideHack on UltraSwing.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-jerryrig-1","cat":"fuel","subcat":"External container mounts","name":"RIGd JerryRig fuel / water mount","slot":"rigd-jerryrig","modelId":"rigd-jerryrig","brand":"RIGd Supply","sku":"JR-W","variant":"Water","source":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249185500","price":174.95,"image":"rigd-sidehack-jerry-can-mount","gross":10,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Lockable jerry-can cradle with different upper straps for fuel and water cans.","specs":"10 lb published cradle reference; Both Straps exact mass unverified. Scepter/Wavian/LifeSaver/Midwest listed; Wavian nozzle removal required.","includes":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount","weightBasis":"Manufacturer lists 10 lb reference cradle product mass; selected strap/hardware scope and total installed addition unverified. Both Straps mass is not inferred.","offers":[{"seller":"RIGd Supply","price":174.95,"url":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249185500"}],"available":true,"deps":[{"label":"SideHack","ids":["acc-rigd-sidehack"],"note":"Requires SideHack on UltraSwing.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","eligibility":"Universal external container mount only; confirm LC250 mounting stack and local container/transport rules. No fuel container or tank capacity included.","label":"Water","choice":null,"url":"/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-1","priceAmount":174.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra."},{"label":"SideHack","status":"check","detail":"Requires SideHack on UltraSwing.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-jerryrig-2","cat":"fuel","subcat":"External container mounts","name":"RIGd JerryRig fuel / water mount","slot":"rigd-jerryrig","modelId":"rigd-jerryrig","brand":"RIGd Supply","sku":"JR-FW","variant":"Both Straps (+45)","source":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249218268","price":224.95,"image":"rigd-sidehack-jerry-can-mount","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Lockable jerry-can cradle with different upper straps for fuel and water cans.","specs":"10 lb published cradle reference; Both Straps exact mass unverified. Scepter/Wavian/LifeSaver/Midwest listed; Wavian nozzle removal required.","includes":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":224.95,"url":"https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249218268"}],"available":true,"deps":[{"label":"SideHack","ids":["acc-rigd-sidehack"],"note":"Requires SideHack on UltraSwing.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Both fuel and water straps · one cradle","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","eligibility":"Universal external container mount only; confirm LC250 mounting stack and local container/transport rules. No fuel container or tank capacity included.","label":"Both fuel and water straps · one cradle","choice":null,"url":"/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-2","priceAmount":224.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra."},{"label":"SideHack","status":"check","detail":"Requires SideHack on UltraSwing.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-rotopax-mount","slug":"rigd-ultraswing-rotopax-bracket","path":"/products/rigd-ultraswing-rotopax-bracket","name":"RIGd UltraSwing RotopaX bracket","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"fuel","categorySlug":"fuel-and-range","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-rotopax-mount","cat":"fuel","subcat":"External container mounts","name":"RIGd UltraSwing RotopaX bracket","slot":"rigd-rotopax-mount","modelId":"rigd-rotopax-mount","brand":"RIGd Supply","sku":"49RPM","variant":"Default Title","source":"https://www.rigdsupply.com/products/rigd-ultraswing-rotopax-mount?variant=42134602383580","price":49.95,"image":"rigd-rigd-ultraswing-rotopax-mount","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Adjustable container bracket for the UltraSwing upper arm.","specs":"Mounts left/right/center; all UltraSwing versions. Exact mass and total loaded capacity require confirmation.","includes":"RIGd bracket only; LOX/compatible pack mount and container extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Verify container orientation, heat and loaded clearances. Mount alone adds no fuel capacity.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-ultraswing-rotopax-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":49.95,"url":"https://www.rigdsupply.com/products/rigd-ultraswing-rotopax-mount?variant=42134602383580"}],"available":true,"deps":[{"label":"UltraSwing","ids":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"note":"Requires UltraSwing upper arm.","page":"bumpers"},{"label":"RotopaX pack mount and container","ids":[],"slots":[],"note":"Separate compatible pack mount + container required; confirm exact bolt pattern and loaded capacity.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","eligibility":"Universal external container mount only; confirm LC250 mounting stack and local container/transport rules. No fuel container or tank capacity included.","label":"Default Title","choice":null,"url":"/products/rigd-ultraswing-rotopax-bracket","priceAmount":49.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"RIGd bracket only; LOX/compatible pack mount and container extra."},{"label":"UltraSwing","status":"check","detail":"Requires UltraSwing upper arm.","page":"bumpers"},{"label":"RotopaX pack mount and container","status":"check","detail":"Separate compatible pack mount + container required; confirm exact bolt pattern and loaded capacity.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Verify container orientation, heat and loaded clearances. Mount alone adds no fuel capacity."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-wobnot","slug":"rigd-wobnot-hitch-extension","path":"/products/rigd-wobnot-hitch-extension","name":"RIGd WobNot hitch extension","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-wobnot","cat":"body","subcat":"Hitch accessories","name":"RIGd WobNot hitch extension","slot":"rigd-wobnot","modelId":"rigd-wobnot","brand":"RIGd Supply","sku":"49-11-L","variant":"WobNot™ w/ Locking Bolt","source":"https://www.rigdsupply.com/products/rigd-adjustable-anti-wobble-hitch-extension?variant=31342153662537","price":149.95,"image":"rigd-rigd-adjustable-anti-wobble-hitch-extension","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.5,"desc":"Adjustable anti-wobble extension for a compatible bike rack.","specs":"2-inch accessory receiver; three positions, 6–8 in extension; 100 lb load limit; not tow-rated.","includes":"Extension with locking anti-rattle bolt; rack/carrier extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Never mount an UltraSwing on this extension. Intended for the UltraSwing offset receiver / compatible 2-inch bike rack; RambleRack does not need this for its specified setup.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rigd-adjustable-anti-wobble-hitch-extension","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":149.95,"url":"https://www.rigdsupply.com/products/rigd-adjustable-anti-wobble-hitch-extension?variant=31342153662537"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"WobNot™ w/ Locking Bolt","choice":null,"url":"/products/rigd-wobnot-hitch-extension","priceAmount":149.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Extension with locking anti-rattle bolt; rack/carrier extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Never mount an UltraSwing on this extension. Intended for the UltraSwing offset receiver / compatible 2-inch bike rack; RambleRack does not need this for its specified setup."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-skep","slug":"rigd-skep-skid-hitch-step","path":"/products/rigd-skep-skid-hitch-step","name":"RIGd SKEP skid / hitch step","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-skep","cat":"body","subcat":"Hitch accessories","name":"RIGd SKEP skid / hitch step","slot":"rigd-skep","modelId":"rigd-skep","brand":"RIGd Supply","sku":"SKEP-C","variant":"Default Title","source":"https://www.rigdsupply.com/products/skep-skid-plate-hitch-step?variant=40999513686209","price":249.95,"image":"rigd-skep-skid-plate-hitch-step","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.5,"desc":"Protective hitch step designed for the UltraSwing.","specs":"UltraSwing only; not compatible with a normal vehicle hitch receiver. Exact mass / numeric step rating unverified.","includes":"SKEP with grip tape and locking anti-rattle pin.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/skep-skid-plate-hitch-step","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":249.95,"url":"https://www.rigdsupply.com/products/skep-skid-plate-hitch-step?variant=40999513686209"}],"available":true,"deps":[{"label":"UltraSwing","ids":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"note":"Requires UltraSwing, not the standard LC250 receiver.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-skep-skid-hitch-step","priceAmount":249.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.5],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"SKEP with grip tape and locking anti-rattle pin."},{"label":"UltraSwing","status":"check","detail":"Requires UltraSwing, not the standard LC250 receiver.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-utilicaddy","slug":"rigd-utilicaddy","path":"/products/rigd-utilicaddy","name":"RIGd UtiliCaddy","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"roof","categorySlug":"roof-and-camping","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-utilicaddy","cat":"roof","subcat":"Camp table accessories","name":"RIGd UtiliCaddy","slot":"rigd-utilicaddy","modelId":"rigd-utilicaddy","brand":"RIGd Supply","sku":"ULTR-CDY","variant":"Default Title","source":"https://www.rigdsupply.com/products/ultra-caddy?variant=52087621353692","price":29.95,"image":"rigd-ultra-caddy","gross":1.1875,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Small organizing tray for compatible UltraTable / MegaTable.","specs":"8.25 × 5.75 × 1.5 in; 1 lb 3 oz product.","includes":"One caddy; compatible camp table extra. Reference photo can show an optional table.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ultra-caddy","weightBasis":"Manufacturer product mass 1.1875 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.","offers":[{"seller":"RIGd Supply","price":29.95,"url":"https://www.rigdsupply.com/products/ultra-caddy?variant=52087621353692"}],"available":true,"deps":[{"label":"Compatible RIGd camp table","ids":["acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp"],"note":"Requires compatible UltraTable or MegaTable; confirm SL mounting revision.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-utilicaddy","priceAmount":29.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"One caddy; compatible camp table extra. Reference photo can show an optional table."},{"label":"Compatible RIGd camp table","status":"check","detail":"Requires compatible UltraTable or MegaTable; confirm SL mounting revision.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"acc-rigd-sidekick","slug":"rigd-sidekick-repair-stand-bracket","path":"/products/rigd-sidekick-repair-stand-bracket","name":"RIGd SideKick repair-stand bracket","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-sidekick","cat":"body","subcat":"Carrier accessory mounts","name":"RIGd SideKick repair-stand bracket","slot":"rigd-sidekick","modelId":"rigd-sidekick","brand":"RIGd Supply","sku":"SDE-KCK-C","variant":"Default Title","source":"https://www.rigdsupply.com/products/side-kick?variant=43791950971100","price":29.95,"image":"rigd-side-kick","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"SideHack bracket for a separately purchased wall-mount bike repair head.","specs":"SideHack required; no complete stand head included; published mass / capacity unverified.","includes":"Mounting bracket only. SideHack, carrier and compatible repair stand head extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Listed wall-mount head compatibility is not a guarantee for every head; confirm exact hole spacing.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/side-kick","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":29.95,"url":"https://www.rigdsupply.com/products/side-kick?variant=43791950971100"}],"available":true,"deps":[{"label":"SideHack","ids":["acc-rigd-sidehack"],"note":"Requires SideHack.","page":"bumpers"},{"label":"Compatible repair-stand head","ids":[],"slots":[],"note":"Purchase a compatible wall-mount head separately; confirm mounting pattern.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-sidekick-repair-stand-bracket","priceAmount":29.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Mounting bracket only. SideHack, carrier and compatible repair stand head extra."},{"label":"SideHack","status":"check","detail":"Requires SideHack.","page":"bumpers"},{"label":"Compatible repair-stand head","status":"check","detail":"Purchase a compatible wall-mount head separately; confirm mounting pattern.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Listed wall-mount head compatibility is not a guarantee for every head; confirm exact hole spacing."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-pin58","slug":"rigd-5-8-inch-hitch-pin","path":"/products/rigd-5-8-inch-hitch-pin","name":"RIGd 5/8-inch hitch pin","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-pin58-0","cat":"body","subcat":"Hitch security","name":"RIGd 5/8-inch hitch pin","slot":"rigd-pin58","modelId":"rigd-pin58","brand":"RIGd Supply","sku":"61072-D","variant":"USA Made Locking Standard Length 2\" & 2.5\"","source":"https://www.rigdsupply.com/products/hitch-pin?variant=44472730288348","price":42.45,"image":"rigd-hitch-pin","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Retention pin choices for UltraSwing / RambleRack.","specs":"5/8-inch family; standard locking, standard non-locking, or long locking. Measure required usable span on LC250. Long listing names Tacoma/F350, not unconditional LC250 approval.","includes":"Selected pin and keys where locking; no carrier.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/hitch-pin","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":42.45,"url":"https://www.rigdsupply.com/products/hitch-pin?variant=44472730288348"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"USA locking · standard span","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA locking · standard span","choice":null,"url":"/products/rigd-5-8-inch-hitch-pin?variant=acc-rigd-pin58-0","priceAmount":42.45,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected pin and keys where locking; no carrier."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-pin58-1","cat":"body","subcat":"Hitch security","name":"RIGd 5/8-inch hitch pin","slot":"rigd-pin58","modelId":"rigd-pin58","brand":"RIGd Supply","sku":"61064-D","variant":"USA Made Non Locking 2\" & 2.5\"","source":"https://www.rigdsupply.com/products/hitch-pin?variant=44472732090588","price":11.45,"image":"rigd-hitch-pin","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Retention pin choices for UltraSwing / RambleRack.","specs":"5/8-inch family; standard locking, standard non-locking, or long locking. Measure required usable span on LC250. Long listing names Tacoma/F350, not unconditional LC250 approval.","includes":"Selected pin and keys where locking; no carrier.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/hitch-pin","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":11.45,"url":"https://www.rigdsupply.com/products/hitch-pin?variant=44472732090588"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"USA non-locking · 3-5/8-inch usable span","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA non-locking · 3-5/8-inch usable span","choice":null,"url":"/products/rigd-5-8-inch-hitch-pin?variant=acc-rigd-pin58-1","priceAmount":11.45,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected pin and keys where locking; no carrier."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-pin58-2","cat":"body","subcat":"Hitch security","name":"RIGd 5/8-inch hitch pin","slot":"rigd-pin58","modelId":"rigd-pin58","brand":"RIGd Supply","sku":"61194-D","variant":"USA Made Locking Long Length 3 7/8\" (2024+ Toyota Tacoma & F350)","source":"https://www.rigdsupply.com/products/hitch-pin?variant=46730930782428","price":45.45,"image":"rigd-hitch-pin","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Retention pin choices for UltraSwing / RambleRack.","specs":"5/8-inch family; standard locking, standard non-locking, or long locking. Measure required usable span on LC250. Long listing names Tacoma/F350, not unconditional LC250 approval.","includes":"Selected pin and keys where locking; no carrier.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/hitch-pin","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":45.45,"url":"https://www.rigdsupply.com/products/hitch-pin?variant=46730930782428"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"USA locking · long 3-7/8-inch span, measure first","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA locking · long 3-7/8-inch span, measure first","choice":null,"url":"/products/rigd-5-8-inch-hitch-pin?variant=acc-rigd-pin58-2","priceAmount":45.45,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected pin and keys where locking; no carrier."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. UltraSwing requires a pin in addition to its anti-wobble wedge; choose span from actual receiver/plate width. Pin rating does not uprate vehicle or carrier."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-pin12","slug":"rigd-rambleswing-pro-1-2-inch-locking-pin","path":"/products/rigd-rambleswing-pro-1-2-inch-locking-pin","name":"RIGd RambleSwing Pro 1/2-inch locking pin","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-pin12-0","cat":"body","subcat":"Hitch security","name":"RIGd RambleSwing Pro 1/2-inch locking pin","slot":"rigd-pin12","modelId":"rigd-pin12","brand":"RIGd Supply","sku":"61068-D","variant":"USA Made Locking Standard Length 2\" & 2.5\"","source":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2?variant=46803690782940","price":42.45,"image":"rigd-rambleswing-locking-hitch-pin-1-2","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Locking retention pin for the non-towing RambleSwing Pro.","specs":"1/2-inch diameter; standard / long 3-7/8-inch listed span; confirm LC250 receiver width.","includes":"Selected lock/pin and keys. Carrier extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":42.45,"url":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2?variant=46803690782940"}],"available":true,"deps":[{"label":"RambleSwing Pro","ids":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"For RambleSwing Pro; confirm span.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA Made Locking Standard Length 2\" & 2.5\"","choice":null,"url":"/products/rigd-rambleswing-pro-1-2-inch-locking-pin?variant=acc-rigd-pin12-0","priceAmount":42.45,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected lock/pin and keys. Carrier extra."},{"label":"RambleSwing Pro","status":"check","detail":"For RambleSwing Pro; confirm span.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-pin12-1","cat":"body","subcat":"Hitch security","name":"RIGd RambleSwing Pro 1/2-inch locking pin","slot":"rigd-pin12","modelId":"rigd-pin12","brand":"RIGd Supply","sku":"61090-D","variant":"USA Made Locking Long Length 3 7/8\" (2024+ Toyota Tacoma & F350)","source":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2?variant=46803690815708","price":45.95,"image":"rigd-rambleswing-locking-hitch-pin-1-2","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Locking retention pin for the non-towing RambleSwing Pro.","specs":"1/2-inch diameter; standard / long 3-7/8-inch listed span; confirm LC250 receiver width.","includes":"Selected lock/pin and keys. Carrier extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":45.95,"url":"https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2?variant=46803690815708"}],"available":true,"deps":[{"label":"RambleSwing Pro","ids":["acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0"],"note":"For RambleSwing Pro; confirm span.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA Made Locking Long Length 3 7/8\" (2024+ Toyota Tacoma & F350)","choice":null,"url":"/products/rigd-rambleswing-pro-1-2-inch-locking-pin?variant=acc-rigd-pin12-1","priceAmount":45.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected lock/pin and keys. Carrier extra."},{"label":"RambleSwing Pro","status":"check","detail":"For RambleSwing Pro; confirm span.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-lever-lock","slug":"rigd-ramblerack-lever-lock","path":"/products/rigd-ramblerack-lever-lock","name":"RIGd RambleRack lever lock","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-lever-lock-0","cat":"body","subcat":"Hitch security","name":"RIGd RambleRack lever lock","slot":"rigd-lever-lock","modelId":"rigd-lever-lock","brand":"RIGd Supply","sku":"61158-D","variant":"USA Made Lever Lock","source":"https://www.rigdsupply.com/products/ramblerack-lever-lock?variant=44476025831644","price":61.45,"image":"rigd-ramblerack-lever-lock","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Auxiliary lock for a RambleRack lever.","specs":"USA lock or Curt lock; convenience security only. Use rack primary lock anchor for main bike security.","includes":"Selected lever lock; rack and primary security chain/lock extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ramblerack-lever-lock","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":61.45,"url":"https://www.rigdsupply.com/products/ramblerack-lever-lock?variant=44476025831644"}],"available":true,"deps":[{"label":"RambleRack","ids":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"note":"Requires compatible RambleRack lever.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"USA Made Lever Lock","choice":null,"url":"/products/rigd-ramblerack-lever-lock?variant=acc-rigd-lever-lock-0","priceAmount":61.45,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected lever lock; rack and primary security chain/lock extra."},{"label":"RambleRack","status":"check","detail":"Requires compatible RambleRack lever.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null},{"id":"acc-rigd-lever-lock-1","cat":"body","subcat":"Hitch security","name":"RIGd RambleRack lever lock","slot":"rigd-lever-lock","modelId":"rigd-lever-lock","brand":"RIGd Supply","sku":"23522","variant":"Curt Lever Lock","source":"https://www.rigdsupply.com/products/ramblerack-lever-lock?variant=44476025798876","price":28.19,"image":"rigd-ramblerack-lever-lock","gross":null,"weight":null,"weightVerified":false,"hmin":0.1,"hmax":0.25,"desc":"Auxiliary lock for a RambleRack lever.","specs":"USA lock or Curt lock; convenience security only. Use rack primary lock anchor for main bike security.","includes":"Selected lever lock; rack and primary security chain/lock extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/ramblerack-lever-lock","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":28.19,"url":"https://www.rigdsupply.com/products/ramblerack-lever-lock?variant=44476025798876"}],"available":true,"deps":[{"label":"RambleRack","ids":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon"],"note":"Requires compatible RambleRack lever.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Curt Lever Lock","choice":null,"url":"/products/rigd-ramblerack-lever-lock?variant=acc-rigd-lever-lock-1","priceAmount":28.19,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.1,0.25],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected lever lock; rack and primary security chain/lock extra."},{"label":"RambleRack","status":"check","detail":"Requires compatible RambleRack lever.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"rigd-plate-light","slug":"rigd-license-plate-light-kit","path":"/products/rigd-license-plate-light-kit","name":"RIGd license-plate light kit","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"lighting","categorySlug":"lighting","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-plate-us","cat":"lighting","subcat":"Carrier plate lighting","name":"RIGd license-plate light kit","slot":"rigd-plate-us","modelId":"rigd-plate-us","brand":"RIGd Supply","sku":"LCEN01","variant":"Default Title","source":"https://www.rigdsupply.com/products/license-plate-light-kit?variant=44067085615324","price":74.95,"image":"rigd-license-plate-light-kit","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Prewired relocation/illumination kit for its specific carrier attachment.","specs":"4-pin flat trailer plug; 7-pin needs separate adapter. 6-foot cable reference; verify routing.","includes":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/license-plate-light-kit","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":74.95,"url":"https://www.rigdsupply.com/products/license-plate-light-kit?variant=44067085615324"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"UltraSwing standard plate kit · included with new carrier","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"UltraSwing standard plate kit · included with new carrier","choice":null,"url":"/products/rigd-license-plate-light-kit?variant=acc-rigd-plate-us","priceAmount":74.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-plate","productIds":["acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"License Plate Lights for UltraSwing","url":"https://www.youtube.com/watch?v=0SkqA1zTVLA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official plate-light family reference. Cable routing and exact bracket differ by selected kit.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-plate-hp","cat":"lighting","subcat":"Carrier plate lighting","name":"RIGd license-plate light kit","slot":"rigd-plate-hp","modelId":"rigd-plate-hp","brand":"RIGd Supply","sku":"LCEN02","variant":"Default Title","source":"https://www.rigdsupply.com/products/copy-of-license-plate-light-kit?variant=44072590409948","price":74.95,"image":"rigd-copy-of-license-plate-light-kit","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Prewired relocation/illumination kit for its specific carrier attachment.","specs":"4-pin flat trailer plug; 7-pin needs separate adapter. 6-foot cable reference; verify routing.","includes":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/copy-of-license-plate-light-kit","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":74.95,"url":"https://www.rigdsupply.com/products/copy-of-license-plate-light-kit?variant=44072590409948"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"HitchingPost / UltraSwing plate kit","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"HitchingPost / UltraSwing plate kit","choice":null,"url":"/products/rigd-license-plate-light-kit?variant=acc-rigd-plate-hp","priceAmount":74.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-plate","productIds":["acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"type":"video","title":"License Plate Lights for UltraSwing","url":"https://www.youtube.com/watch?v=0SkqA1zTVLA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official plate-light family reference. Cable routing and exact bracket differ by selected kit.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-plate-lug","cat":"lighting","subcat":"Carrier plate lighting","name":"RIGd license-plate light kit","slot":"rigd-plate-lug","modelId":"rigd-plate-lug","brand":"RIGd Supply","sku":"LCEN03","variant":"Default Title","source":"https://www.rigdsupply.com/products/license-plate-light-kit-for-rambleswing-pro?variant=46491418263772","price":99.95,"image":"rigd-license-plate-light-kit-for-rambleswing-pro","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Prewired relocation/illumination kit for its specific carrier attachment.","specs":"4-pin flat trailer plug; 7-pin needs separate adapter. 11-foot lead; requires spare mount / wheel plate.","includes":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/license-plate-light-kit-for-rambleswing-pro","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":99.95,"url":"https://www.rigdsupply.com/products/license-plate-light-kit-for-rambleswing-pro?variant=46491418263772"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Lug-mounted spare / wheel plate kit","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Lug-mounted spare / wheel plate kit","choice":null,"url":"/products/rigd-license-plate-light-kit?variant=acc-rigd-plate-lug","priceAmount":99.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected bracket / LED / wiring / hardware; frame and trailer adapter extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Spare mount / wheel plate","status":"check","detail":"Lug-mounted LCEN03 requires a spare mount / wheel plate. It does not fit a bare arm alone.","page":"body"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. LCEN01 is already included with new UltraSwing. LCEN03 requires spare mount or wheel plate. Verify local plate visibility and trailer connector operation."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-lug-plate","productIds":["acc-rigd-plate-lug"],"type":"video","title":"Lug Mounted License Plate Kit Install","url":"https://www.youtube.com/watch?v=zYjpCN971Ys","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official lug-mounted kit installation; requires spare mount / wheel plate and compatible trailer connector.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"rigd-stinger","slug":"rigd-ramblerack-stinger","path":"/products/rigd-ramblerack-stinger","name":"RIGd RambleRack stinger","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-stinger-short","cat":"body","subcat":"Hitch bike rack mounts","name":"RIGd RambleRack stinger","slot":"rigd-stinger-short","modelId":"rigd-stinger-short","brand":"RIGd Supply","sku":"SHRT-STNGR","variant":"Default Title","source":"https://www.rigdsupply.com/products/short-stinger?variant=43892952531164","price":199.95,"image":"rigd-short-stinger","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Separate stinger to complete a compatible RambleRack tray-only setup.","specs":"Short for vertical-hatch / no-spare or compatible swing-out geometry; Long listed with UltraSwing rack configurations. Exact mass and hatch fit require confirmation.","includes":"Selected stinger and listed tray-mounting hardware; tray/rack extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Complete stinger-equipped rack packages already include one. Confirm exact rack revision and spare/hatch clearances.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/short-stinger","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":199.95,"url":"https://www.rigdsupply.com/products/short-stinger?variant=43892952531164"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Short Stinger","rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Short Stinger","choice":null,"url":"/products/rigd-ramblerack-stinger?variant=acc-rigd-stinger-short","priceAmount":199.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected stinger and listed tray-mounting hardware; tray/rack extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Complete stinger-equipped rack packages already include one. Confirm exact rack revision and spare/hatch clearances."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null},{"id":"acc-rigd-stinger-long","cat":"body","subcat":"Hitch bike rack mounts","name":"RIGd RambleRack stinger","slot":"rigd-stinger-long","modelId":"rigd-stinger-long","brand":"RIGd Supply","sku":"LNG-STNGR","variant":"Default Title","source":"https://www.rigdsupply.com/products/long-stinger-ramble-rack?variant=44016221716700","price":199.95,"image":null,"gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Separate stinger to complete a compatible RambleRack tray-only setup.","specs":"Short for vertical-hatch / no-spare or compatible swing-out geometry; Long listed with UltraSwing rack configurations. Exact mass and hatch fit require confirmation.","includes":"Selected stinger and listed tray-mounting hardware; tray/rack extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Complete stinger-equipped rack packages already include one. Confirm exact rack revision and spare/hatch clearances.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/long-stinger-ramble-rack","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":199.95,"url":"https://www.rigdsupply.com/products/long-stinger-ramble-rack?variant=44016221716700"}],"available":true,"deps":[],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"optionLabel":"Long Stinger","rigd":true,"label":"Long Stinger","choice":null,"url":"/products/rigd-ramblerack-stinger?variant=acc-rigd-stinger-long","priceAmount":199.95,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Selected stinger and listed tray-mounting hardware; tray/rack extra."},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Complete stinger-equipped rack packages already include one. Confirm exact rack revision and spare/hatch clearances."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"acc-rigd-channel-mount","slug":"rigd-ramblerack-channel-mount","path":"/products/rigd-ramblerack-channel-mount","name":"RIGd RambleRack Channel Mount","brand":"RIGd Supply","brandPath":"/brands/rigd-supply","category":"body","categorySlug":"exterior-and-protection","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"acc-rigd-channel-mount","cat":"body","subcat":"Hitch bike rack mounts","name":"RIGd RambleRack Channel Mount","slot":"rigd-channel-mount","modelId":"rigd-channel-mount","brand":"RIGd Supply","sku":"CHNL-MNT","variant":"Default Title","source":"https://www.rigdsupply.com/products/channel-mount?variant=43892952006876","price":200,"image":"rigd-channel-mount","gross":null,"weight":null,"weightVerified":false,"hmin":0.25,"hmax":0.75,"desc":"Mounts a single RambleRack tray to the UltraSwing vertical channel instead of the spare.","specs":"Single tray; replaces spare-tire position. Exact installed mass / capacity unverified.","includes":"Channel mount; compatible tray and UltraSwing extra.","fitment":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","explain":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Cannot occupy the same channel as a spare wheel. Confirm complete tray hardware and safe bike/hatch clearance.","recommendation":"Choose the exact mounting platform and listed contents; confirm the finished setup with RIGd before ordering.","realAccessory":true,"icon":"▦","visual":"none","checked":"October 29, 2026 (America/New_York)","manufacturerHours":false,"basis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","basisUrl":"https://www.rigdsupply.com/products/channel-mount","weightBasis":"Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.","offers":[{"seller":"RIGd Supply","price":200,"url":"https://www.rigdsupply.com/products/channel-mount?variant=43892952006876"}],"available":true,"deps":[{"label":"UltraSwing without spare in channel","ids":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2"],"note":"Requires UltraSwing channel to be free of spare wheel/plate.","page":"bumpers"},{"label":"Compatible RambleRack tray","ids":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4"],"note":"Requires approved tray and hardware.","page":"bumpers"}],"checks":[{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"}],"rigd":true,"imageNote":"Manufacturer product-family reference; selected plate, stinger, strap, lock and bracket can differ. Shown tire, rack, table or other accessories are included only when the selected contents say so.","label":"Default Title","choice":null,"url":"/products/rigd-ramblerack-channel-mount","priceAmount":200,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.","installHours":[0.25,0.75],"installBasis":"Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.","requirements":[{"label":"Selected product / listed contents","status":"included","detail":"Channel mount; compatible tray and UltraSwing extra."},{"label":"UltraSwing without spare in channel","status":"check","detail":"Requires UltraSwing channel to be free of spare wheel/plate.","page":"bumpers"},{"label":"Compatible RambleRack tray","status":"check","detail":"Requires approved tray and hardware.","page":"bumpers"},{"label":"Completed installation and loaded clearance","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.","page":"suspension"},{"label":"Installation / compatibility notes","status":"check","detail":"All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Cannot occupy the same channel as a spare wheel. Confirm complete tray hardware and safe bike/hatch clearance."},{"label":"Installed net weight","status":"check","detail":"Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load."}],"documents":[{"id":"rigd-install-library","productIds":["acc-rigd-ultraswing-0","acc-rigd-ultraswing-1","acc-rigd-ultraswing-2","acc-rigd-rambleswing-3","acc-rigd-rambleswing-0","acc-rigd-rambleswing-bundle-3","acc-rigd-rambleswing-bundle-0","acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-table-us","acc-rigd-table-rp","acc-rigd-table-sl-us","acc-rigd-table-sl-rp","acc-rigd-megatable-us","acc-rigd-megatable-rp","acc-rigd-hitchingpost","acc-rigd-hitchingpost-offset","acc-rigd-tire-mount","acc-rigd-wings","acc-rigd-sidehack","acc-rigd-jerryrig-0","acc-rigd-jerryrig-1","acc-rigd-jerryrig-2","acc-rigd-rotopax-mount","acc-rigd-wobnot","acc-rigd-skep","acc-rigd-utilicaddy","acc-rigd-sidekick","acc-rigd-pin58-0","acc-rigd-pin58-1","acc-rigd-pin58-2","acc-rigd-pin12-0","acc-rigd-pin12-1","acc-rigd-lever-lock-0","acc-rigd-lever-lock-1","acc-rigd-plate-us","acc-rigd-plate-hp","acc-rigd-plate-lug","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"library","title":"RIGd installation library / remaining resource gaps","url":"https://www.rigdsupply.com/pages/installguides","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.","purpose":"reference","checked":"2026-10-29"}],"videos":[{"id":"rigd-video-rack","productIds":["acc-rigd-ramblerack-0","acc-rigd-ramblerack-1","acc-rigd-ramblerack-2","acc-rigd-ramblerack-3","acc-rigd-ramblerack-4","acc-rigd-ramblerack-addon","acc-rigd-stinger-short","acc-rigd-stinger-long","acc-rigd-channel-mount"],"type":"video","title":"Rig'd Supply RambleRack Install (2026)","url":"https://www.youtube.com/watch?v=21aKhAnzAvA","source":"https://www.rigdsupply.com/pages/installguides","publisher":"RIGd Supply","official":true,"scope":"Component / platform reference · not complete LC250 approval","match":"family","note":"Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.","purpose":"installation","checked":"2026-10-29","creator":"RIGd Supply"}],"reviews":[],"clearance":null}]},{"id":"sus-ironman-im25","slug":"ironman-4x4-im2-5-stage-1","path":"/products/ironman-4x4-im2-5-stage-1","name":"IM2.5 · Stage 1","brand":"IRONMAN 4X4","brandPath":"/brands/ironman-4x4","category":"suspension","categorySlug":"suspension","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"sus-ironman-im25","brand":"IRONMAN 4X4","name":"IM2.5 · Stage 1","sku":"TOY083BAKM1S1P","price":2147,"image":"ironman-im25","lift":"3 in / 2 in","damper":"2.5-inch nitrogen monotube","adjust":"Adjustable front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Light · 0–220 lb added","included":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","uca":false,"correction":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","basisUrl":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1","offers":[{"seller":"Ironman 4x4","price":2147,"url":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403199211"}],"checked":"October 29, 2026 (America/Denver)","fitment":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","explain":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Light · 0–220 lb added","choice":["heavy","light"],"configLabel":"Front Heavy · 110–240 lb added / Rear Light · 0–220 lb added","from":false,"loadNote":"Exact Stage 1 US product selector: one front Heavy 110–240 lb choice, not a stock-load option. Rear ranges overlap; heavy choices require constant load and Extra Heavy requires Ironman confirmation. These are spring-selection labels, not increased payload/GVWR. Stage 1 excludes UCAs and adjustable panhard. Confirm actual axle loads and geometry before ordering.","source":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403199211","springParts":"Factory-matched front assemblies and rear springs in TOY083BAKM1S1P. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Light · 0–220 lb added","url":"/products/ironman-4x4-im2-5-stage-1?front=heavy&rear=light","priceAmount":2147,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","installHours":[4,7],"installBasis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","page":"suspension"}],"documents":[],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ironman-im25","brand":"IRONMAN 4X4","name":"IM2.5 · Stage 1","sku":"TOY083BBKM1S1P","price":2147,"image":"ironman-im25","lift":"3 in / 2 in","damper":"2.5-inch nitrogen monotube","adjust":"Adjustable front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Medium · 0–440 lb added","included":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","uca":false,"correction":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","basisUrl":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1","offers":[{"seller":"Ironman 4x4","price":2147,"url":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403297515"}],"checked":"October 29, 2026 (America/Denver)","fitment":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","explain":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Medium · 0–440 lb added","choice":["heavy","medium"],"configLabel":"Front Heavy · 110–240 lb added / Rear Medium · 0–440 lb added","from":false,"loadNote":"Exact Stage 1 US product selector: one front Heavy 110–240 lb choice, not a stock-load option. Rear ranges overlap; heavy choices require constant load and Extra Heavy requires Ironman confirmation. These are spring-selection labels, not increased payload/GVWR. Stage 1 excludes UCAs and adjustable panhard. Confirm actual axle loads and geometry before ordering.","source":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403297515","springParts":"Factory-matched front assemblies and rear springs in TOY083BBKM1S1P. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Medium · 0–440 lb added","url":"/products/ironman-4x4-im2-5-stage-1?front=heavy&rear=medium","priceAmount":2147,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","installHours":[4,7],"installBasis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","page":"suspension"}],"documents":[],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ironman-im25","brand":"IRONMAN 4X4","name":"IM2.5 · Stage 1","sku":"TOY083BCKM1S1P","price":2147,"image":"ironman-im25","lift":"3 in / 2 in","damper":"2.5-inch nitrogen monotube","adjust":"Adjustable front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Heavy · 440+ lb added","included":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","uca":false,"correction":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","basisUrl":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1","offers":[{"seller":"Ironman 4x4","price":2147,"url":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403035371"}],"checked":"October 29, 2026 (America/Denver)","fitment":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","explain":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Heavy · 440+ lb added","choice":["heavy","heavy"],"configLabel":"Front Heavy · 110–240 lb added / Rear Heavy · 440+ lb added","from":false,"loadNote":"Exact Stage 1 US product selector: one front Heavy 110–240 lb choice, not a stock-load option. Rear ranges overlap; heavy choices require constant load and Extra Heavy requires Ironman confirmation. These are spring-selection labels, not increased payload/GVWR. Stage 1 excludes UCAs and adjustable panhard. Confirm actual axle loads and geometry before ordering.","source":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403035371","springParts":"Factory-matched front assemblies and rear springs in TOY083BCKM1S1P. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Heavy · 440+ lb added","url":"/products/ironman-4x4-im2-5-stage-1?front=heavy&rear=heavy","priceAmount":2147,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","installHours":[4,7],"installBasis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","page":"suspension"}],"documents":[],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ironman-im25","brand":"IRONMAN 4X4","name":"IM2.5 · Stage 1","sku":"TOY083BDKM1S1P","price":2147,"image":"ironman-im25","lift":"3 in / 2 in","damper":"2.5-inch nitrogen monotube","adjust":"Adjustable front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Extra Heavy · 880+ lb added","included":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","uca":false,"correction":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","basisUrl":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1","offers":[{"seller":"Ironman 4x4","price":2147,"url":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403395819"}],"checked":"October 29, 2026 (America/Denver)","fitment":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit","explain":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Extra Heavy · 880+ lb added","choice":["heavy","extraheavy"],"configLabel":"Front Heavy · 110–240 lb added / Rear Extra Heavy · 880+ lb added","from":false,"loadNote":"Exact Stage 1 US product selector: one front Heavy 110–240 lb choice, not a stock-load option. Rear ranges overlap; heavy choices require constant load and Extra Heavy requires Ironman confirmation. These are spring-selection labels, not increased payload/GVWR. Stage 1 excludes UCAs and adjustable panhard. Confirm actual axle loads and geometry before ordering.","source":"https://www.ironman4x4.com/products/3-im-2-5-suspension-lift-kit-for-toyota-land-cruiser-2024-toy083km1?variant=46750403395819","springParts":"Factory-matched front assemblies and rear springs in TOY083BDKM1S1P. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Extra Heavy · 880+ lb added","url":"/products/ironman-4x4-im2-5-stage-1?front=heavy&rear=extraheavy","priceAmount":2147,"priceBasis":"selected configuration","sourceChecked":"October 29, 2026 (America/Denver)","fitmentText":"Manufacturer US LC250 2024+ listing. Verify exact year, grade and hybrid/VIN application; front selector only offers added-load Heavy springs.","installHours":[4,7],"installBasis":"Ironman’s LC250 IM2.5 product FAQ publishes 4–7 hours for a professional shop. Alignment, extra correction hardware and calibration are additional. Follow the current kit instructions and recheck fasteners after the maker’s stated interval.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front IM2.5 coilovers, rear IM2.5 shocks, rear coils, differential drop and bump-stop spacer kit"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Stage 1: UCAs and adjustable rear panhard not included. At 3-inch front lift, confirm alignment range, arms/clearance, axle centering and any ADAS calibration with the installer. Alignment and extra hardware quoted separately.","page":"suspension"}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-eibach","slug":"eibach-pro-truck-lift-stage-2r","path":"/products/eibach-pro-truck-lift-stage-2r","name":"PRO-TRUCK-LIFT Stage 2R","brand":"EIBACH","brandPath":"/brands/eibach","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"id":"sus-eibach","brand":"EIBACH","name":"PRO-TRUCK-LIFT Stage 2R","sku":"E86-82-108-02-22","image":"eibach","price":1799,"lift":"0–3 in / 1.5 in","damper":"Front coilovers · rear remote reservoirs","adjust":"Threaded front height · fixed damping","load":"Standard springs; constant-load rating unconfirmed","included":"Front coilovers, rear shocks and rear springs","uca":false,"correction":"Control arms and correction hardware not included. Verify requirements at your chosen height.","hmin":4,"hmax":6,"basis":"Planning inference for a spring/shock installation. Comparable Tacoma Stage 2R retailer installation quotes 4 hours; LC250 access, spring work and setup may differ.","basisUrl":"https://www.extremeterrain.com/eibach-tacoma-pro-truck-coil-over-kit-stage-2r-e86-82-007-02-22.html","offers":[{"seller":"Eibach","price":1799,"url":"https://www.eibach.com/product/E86-82-108-02-22"},{"seller":"LIMIT+1","price":1799,"url":"https://limitplus1.com/products/eibach-2024-land-cruiser-pro-truck-lift-stage-2r"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks and rear springs","explain":"Control arms and correction hardware not included. Verify requirements at your chosen height.","label":"Front coilovers, rear shocks and rear springs","choice":null,"url":"/products/eibach-pro-truck-lift-stage-2r","priceAmount":1799,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,6],"installBasis":"Planning inference for a spring/shock installation. Comparable Tacoma Stage 2R retailer installation quotes 4 hours; LC250 access, spring work and setup may differ.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks and rear springs"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Control arms and correction hardware not included. Verify requirements at your chosen height.","page":"suspension"}],"documents":[{"id":"eibach-front","productIds":["sus-eibach"],"type":"manual","title":"Eibach LC250 front coilovers E86-82-108-01-20","url":"https://eibach.com/storage/instructions/D4401.pdf","publisher":"Eibach","scope":"Component instructions · LC250 front coilovers E86-82-108-01-20","note":"These component sheets do not cover every part of the complete Stage 2R build. Match all installed part numbers and obtain the rear spring instructions separately.","match":"component","official":true,"source":"https://www.eibach.com/product/E86-82-108-02-22","purpose":"installation","checked":"2026-10-25"},{"id":"eibach-rear","productIds":["sus-eibach"],"type":"manual","title":"Eibach LC250 rear reservoir shocks E60-82-108-02-01","url":"https://eibach.com/storage/instructions/D4402.pdf","publisher":"Eibach","scope":"Component instructions · LC250 rear reservoir shocks E60-82-108-02-01","note":"These component sheets do not cover every part of the complete Stage 2R build. Match all installed part numbers and obtain the rear spring instructions separately.","match":"component","official":true,"source":"https://www.eibach.com/product/E86-82-108-02-22","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-ironman","slug":"ironman-4x4-foam-cell-pro-stage-1","path":"/products/ironman-4x4-foam-cell-pro-stage-1","name":"Foam Cell Pro · Stage 1","brand":"IRONMAN 4X4","brandPath":"/brands/ironman-4x4","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083BAKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Medium · 0–110 lb added; rear: Light · 0–220 lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Medium · 0–110 lb added","rearLoad":"Light · 0–220 lb added","choice":["medium","light"],"configLabel":"Front Medium · 0–110 lb added / Rear Light · 0–220 lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","springParts":"Factory-matched front assemblies and rear springs in TOY083BAKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Medium · 0–110 lb added / Rear Light · 0–220 lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=medium&rear=light","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083BBKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Medium · 0–110 lb added; rear: Medium · 0–440 lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196222699"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Medium · 0–110 lb added","rearLoad":"Medium · 0–440 lb added","choice":["medium","medium"],"configLabel":"Front Medium · 0–110 lb added / Rear Medium · 0–440 lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196222699","springParts":"Factory-matched front assemblies and rear springs in TOY083BBKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Medium · 0–110 lb added / Rear Medium · 0–440 lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=medium&rear=medium","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083BCKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Medium · 0–110 lb added; rear: Heavy · 440+ lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196321003"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Medium · 0–110 lb added","rearLoad":"Heavy · 440+ lb added","choice":["medium","heavy"],"configLabel":"Front Medium · 0–110 lb added / Rear Heavy · 440+ lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196321003","springParts":"Factory-matched front assemblies and rear springs in TOY083BCKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Medium · 0–110 lb added / Rear Heavy · 440+ lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=medium&rear=heavy","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083CAKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Light · 0–220 lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196517611"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Light · 0–220 lb added","choice":["heavy","light"],"configLabel":"Front Heavy · 110–240 lb added / Rear Light · 0–220 lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196517611","springParts":"Factory-matched front assemblies and rear springs in TOY083CAKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Light · 0–220 lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=heavy&rear=light","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083CBKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Medium · 0–440 lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196615915"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Medium · 0–440 lb added","choice":["heavy","medium"],"configLabel":"Front Heavy · 110–240 lb added / Rear Medium · 0–440 lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196615915","springParts":"Factory-matched front assemblies and rear springs in TOY083CBKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Medium · 0–440 lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=heavy&rear=medium","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-ironman","brand":"IRONMAN 4X4","name":"Foam Cell Pro · Stage 1","sku":"TOY083CCKP1S1P-G","image":"ironman","price":1899,"lift":"2 in / 2 in","damper":"Foam cell · twin tube","adjust":"Front ride height · fixed damping","load":"Front: Heavy · 110–240 lb added; rear: Heavy · 440+ lb added","included":"Front coilovers, rear shocks, rear springs and differential drop","uca":false,"correction":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","hmin":4,"hmax":7,"manufacturerHours":true,"basis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","basisUrl":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1","offers":[{"seller":"Ironman 4x4","price":1899,"url":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196714219"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs and differential drop","explain":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","frontLoad":"Heavy · 110–240 lb added","rearLoad":"Heavy · 440+ lb added","choice":["heavy","heavy"],"configLabel":"Front Heavy · 110–240 lb added / Rear Heavy · 440+ lb added","from":false,"loadNote":"Ironman’s front Medium and Heavy labels differ from its rear Light, Medium and Heavy labels. Rear Light and Medium ranges overlap; its selection guide favors Medium for occasional weekend loading. Heavy rear springs require the stated constant load. The 440+ label does not override vehicle load limits. All six listings here are Stage 1; UCAs and an adjustable panhard are not included.","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196714219","springParts":"Factory-matched front assemblies and rear springs in TOY083CCKP1S1P-G. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Heavy · 110–240 lb added / Rear Heavy · 440+ lb added","url":"/products/ironman-4x4-foam-cell-pro-stage-1?front=heavy&rear=heavy","priceAmount":1899,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[4,7],"installBasis":"Ironman’s LC250 2-inch lift kit FAQ publishes a professional-shop installation range of 4–7 hours. Alignment is required after installation and is quoted separately.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs and differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are in Stage 2, not this kit. Adjustable rear panhard is in Stage 3. Confirm alignment requirements.","page":"suspension"}],"documents":[],"videos":[],"reviews":[{"id":"ef20c2bc-7a81-5b6a-94b1-38ed0d757bd5","productIds":["sus-ironman"],"author":"Luis D.","date":"2026-09-16","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; not LC250 Stage 1","context":"2010–2024 4Runner application","summary":"Reports firmer road control and reduced brake dive/body roll.","sourceVerified":true,"verification":"Source marks verified buyer; not independently verified","checked":"2026-10-25"},{"id":"8ecacd90-8074-4776-8d4c-d42b537846ee","productIds":["sus-ironman"],"author":"Donald H.","date":"2025-11-25","source":"https://www.ironman4x4.com/products/2-foam-cell-pro-suspension-lift-kit-for-toyota-land-cruiser-250-series-2024-toy083kp1?variant=46749196124395","sourceName":"Customer review on manufacturer site","kind":"customer","scope":"Foam Cell Pro family only; different vehicle and spring design","context":"Tacoma; GVW rear leaf springs","summary":"Likes the complete package on a loaded trip but would choose a different rear load rating to reduce harshness.","sourceVerified":false,"verification":"Purchase/ownership not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"sus-ims","slug":"dobinsons-ims-matched-spring-system","path":"/products/dobinsons-ims-matched-spring-system","name":"IMS · matched spring system","brand":"DOBINSONS","brandPath":"/brands/dobinsons","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-882 / C59-817V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2 in target; rear: 0–100 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2 in target","rearLoad":"0–100 lb added","choice":["stock2","light"],"configLabel":"Front Stock load · 2 in target / Rear 0–100 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-882 pair · rear C59-817V pair · IMS59-60660 ×2 · IMS59-60443 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2 in target / Rear 0–100 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock2&rear=light","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-882 / C59-819V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2 in target; rear: 200–400 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2 in target","rearLoad":"200–400 lb added","choice":["stock2","medium"],"configLabel":"Front Stock load · 2 in target / Rear 200–400 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-882 pair · rear C59-819V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2 in target / Rear 200–400 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock2&rear=medium","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-882 / C59-821V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2 in target; rear: 500–700 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2 in target","rearLoad":"500–700 lb added","choice":["stock2","heavy"],"configLabel":"Front Stock load · 2 in target / Rear 500–700 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-882 pair · rear C59-821V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2 in target / Rear 500–700 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock2&rear=heavy","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-882 / C59-823V","image":"ims","price":2150,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2 in target; rear: 800–1,000 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2150,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2 in target","rearLoad":"800–1,000 lb added","choice":["stock2","expedition"],"configLabel":"Front Stock load · 2 in target / Rear 800–1,000 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-882 pair · rear C59-823V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",350],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2 in target / Rear 800–1,000 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock2&rear=expedition","priceAmount":2150,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-882 / C59-825V","image":"ims","price":2250,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2 in target; rear: 1,100–1,300 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2250,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2 in target","rearLoad":"1,100–1,300 lb added","choice":["stock2","commercial"],"configLabel":"Front Stock load · 2 in target / Rear 1,100–1,300 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-882 pair · rear C59-825V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",450],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2 in target / Rear 1,100–1,300 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock2&rear=commercial","priceAmount":2250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-817V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2.5 in target; rear: 0–100 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2.5 in target","rearLoad":"0–100 lb added","choice":["stock25","light"],"configLabel":"Front Stock load · 2.5 in target / Rear 0–100 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-817V pair · IMS59-60660 ×2 · IMS59-60443 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2.5 in target / Rear 0–100 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock25&rear=light","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-819V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2.5 in target; rear: 200–400 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2.5 in target","rearLoad":"200–400 lb added","choice":["stock25","medium"],"configLabel":"Front Stock load · 2.5 in target / Rear 200–400 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-819V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2.5 in target / Rear 200–400 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock25&rear=medium","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-821V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2.5 in target; rear: 500–700 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2.5 in target","rearLoad":"500–700 lb added","choice":["stock25","heavy"],"configLabel":"Front Stock load · 2.5 in target / Rear 500–700 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-821V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2.5 in target / Rear 500–700 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock25&rear=heavy","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-823V","image":"ims","price":2150,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2.5 in target; rear: 800–1,000 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2150,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2.5 in target","rearLoad":"800–1,000 lb added","choice":["stock25","expedition"],"configLabel":"Front Stock load · 2.5 in target / Rear 800–1,000 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-823V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",350],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2.5 in target / Rear 800–1,000 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock25&rear=expedition","priceAmount":2150,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-825V","image":"ims","price":2250,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 2.5 in target; rear: 1,100–1,300 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2250,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 2.5 in target","rearLoad":"1,100–1,300 lb added","choice":["stock25","commercial"],"configLabel":"Front Stock load · 2.5 in target / Rear 1,100–1,300 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-825V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",450],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 2.5 in target / Rear 1,100–1,300 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock25&rear=commercial","priceAmount":2250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-817V","image":"ims","price":2100,"from":false,"lift":"3 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 3 in target; rear: 0–100 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 3 in target","rearLoad":"0–100 lb added","choice":["stock3","light"],"configLabel":"Front Stock load · 3 in target / Rear 0–100 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-817V pair · IMS59-60660 ×2 · IMS59-60443 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 3 in target / Rear 0–100 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock3&rear=light","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-819V","image":"ims","price":2100,"from":false,"lift":"3 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 3 in target; rear: 200–400 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 3 in target","rearLoad":"200–400 lb added","choice":["stock3","medium"],"configLabel":"Front Stock load · 3 in target / Rear 200–400 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-819V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 3 in target / Rear 200–400 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock3&rear=medium","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-821V","image":"ims","price":2100,"from":false,"lift":"3 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 3 in target; rear: 500–700 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 3 in target","rearLoad":"500–700 lb added","choice":["stock3","heavy"],"configLabel":"Front Stock load · 3 in target / Rear 500–700 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-821V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 3 in target / Rear 500–700 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock3&rear=heavy","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-823V","image":"ims","price":2150,"from":false,"lift":"3 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 3 in target; rear: 800–1,000 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2150,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 3 in target","rearLoad":"800–1,000 lb added","choice":["stock3","expedition"],"configLabel":"Front Stock load · 3 in target / Rear 800–1,000 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-823V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",350],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 3 in target / Rear 800–1,000 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock3&rear=expedition","priceAmount":2150,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-825V","image":"ims","price":2250,"from":false,"lift":"3 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: Stock load · 3 in target; rear: 1,100–1,300 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2250,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"Stock load · 3 in target","rearLoad":"1,100–1,300 lb added","choice":["stock3","commercial"],"configLabel":"Front Stock load · 3 in target / Rear 1,100–1,300 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-825V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",450],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front Stock load · 3 in target / Rear 1,100–1,300 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=stock3&rear=commercial","priceAmount":2250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-817V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2 in target; rear: 0–100 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2 in target","rearLoad":"0–100 lb added","choice":["loaded2","light"],"configLabel":"Front 110–220 lb added · 2 in target / Rear 0–100 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-817V pair · IMS59-60660 ×2 · IMS59-60443 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2 in target / Rear 0–100 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded2&rear=light","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-819V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2 in target; rear: 200–400 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2 in target","rearLoad":"200–400 lb added","choice":["loaded2","medium"],"configLabel":"Front 110–220 lb added · 2 in target / Rear 200–400 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-819V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2 in target / Rear 200–400 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded2&rear=medium","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-821V","image":"ims","price":2100,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2 in target; rear: 500–700 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2 in target","rearLoad":"500–700 lb added","choice":["loaded2","heavy"],"configLabel":"Front 110–220 lb added · 2 in target / Rear 500–700 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-821V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2 in target / Rear 500–700 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded2&rear=heavy","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-823V","image":"ims","price":2150,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2 in target; rear: 800–1,000 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2150,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2 in target","rearLoad":"800–1,000 lb added","choice":["loaded2","expedition"],"configLabel":"Front 110–220 lb added · 2 in target / Rear 800–1,000 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-823V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",350],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2 in target / Rear 800–1,000 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded2&rear=expedition","priceAmount":2150,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-816 / C59-825V","image":"ims","price":2250,"from":false,"lift":"2 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2 in target; rear: 1,100–1,300 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2250,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2 in target","rearLoad":"1,100–1,300 lb added","choice":["loaded2","commercial"],"configLabel":"Front 110–220 lb added · 2 in target / Rear 1,100–1,300 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-816 pair · rear C59-825V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",450],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2 in target / Rear 1,100–1,300 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded2&rear=commercial","priceAmount":2250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-817V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2.5 in target; rear: 0–100 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2.5 in target","rearLoad":"0–100 lb added","choice":["loaded25","light"],"configLabel":"Front 110–220 lb added · 2.5 in target / Rear 0–100 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-817V pair · IMS59-60660 ×2 · IMS59-60443 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2.5 in target / Rear 0–100 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded25&rear=light","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-819V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2.5 in target; rear: 200–400 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2.5 in target","rearLoad":"200–400 lb added","choice":["loaded25","medium"],"configLabel":"Front 110–220 lb added · 2.5 in target / Rear 200–400 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-819V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2.5 in target / Rear 200–400 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded25&rear=medium","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-821V","image":"ims","price":2100,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2.5 in target; rear: 500–700 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2100,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2.5 in target","rearLoad":"500–700 lb added","choice":["loaded25","heavy"],"configLabel":"Front 110–220 lb added · 2.5 in target / Rear 500–700 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-821V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",300],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2.5 in target / Rear 500–700 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded25&rear=heavy","priceAmount":2100,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-823V","image":"ims","price":2150,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2.5 in target; rear: 800–1,000 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2150,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2.5 in target","rearLoad":"800–1,000 lb added","choice":["loaded25","expedition"],"configLabel":"Front 110–220 lb added · 2.5 in target / Rear 800–1,000 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-823V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",350],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2.5 in target / Rear 800–1,000 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded25&rear=expedition","priceAmount":2150,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null},{"id":"sus-ims","brand":"DOBINSONS","name":"IMS · matched spring system","sku":"C59-818 / C59-825V","image":"ims","price":2250,"from":false,"lift":"2.5 in / 2 in","damper":"IMS monotube · internal reservoir","adjust":"Spring / height configurations · fixed damping","load":"Front: 110–220 lb added · 2.5 in target; rear: 1,100–1,300 lb added","included":"Front struts, rear shocks and four springs; base supplied unassembled","uca":false,"correction":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","hmin":5,"hmax":7,"basis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","offers":[{"seller":"Dobinsons USA · selected parts sum","price":2250,"url":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front struts, rear shocks and four springs; base supplied unassembled","explain":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements.","frontLoad":"110–220 lb added · 2.5 in target","rearLoad":"1,100–1,300 lb added","choice":["loaded25","commercial"],"configLabel":"Front 110–220 lb added · 2.5 in target / Rear 1,100–1,300 lb added","loadNote":"These are the US LC250 2.4L catalog ratings. Regional / diesel charts differ. A gap between published ranges requires manufacturer confirmation; do not round into the next range. High-load options require vehicle-specific axle and payload checks. Standard-travel struts only; top mounts, assembly and correction parts are extra.","source":"https://dobinsonusa.com/product/dobinsons-1-3-ims-lift-kit-for-toyota-land-cruiser-250-series-2-4l-gas-2024-on/","springParts":"Front C59-818 pair · rear C59-825V pair · IMS59-60660 ×2 · IMS59-60441 ×2","bill":[["Front spring pair",300],["Rear spring pair",450],["Front struts ×2",800],["Rear shocks ×2",700]],"label":"Front 110–220 lb added · 2.5 in target / Rear 1,100–1,300 lb added","url":"/products/dobinsons-ims-matched-spring-system?front=loaded25&rear=commercial","priceAmount":2250,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference allows spring assembly and installation of the base spring/shock package. Optional correction parts add work; no whole-kit time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front struts, rear shocks and four springs; base supplied unassembled"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Top mounts / assembly extra. Extended travel requires aftermarket UCAs. At higher lifts, verify UCA, diff-drop and panhard requirements. Selected front lift exceeds 2 inches: obtain a configuration-specific quote for UCAs and geometry correction.","page":"suspension"}],"documents":[{"id":"dobinsons-library","productIds":["sus-ims"],"type":"library","title":"Dobinsons installation instruction library","url":"https://dobinsonusa.com/instructions/","publisher":"Dobinsons","scope":"Library · exact IMS LC250 kit sheets not established","note":"Find current instructions by all component part numbers. No complete LC250 IMS instruction set was verified in this pass.","match":"reference","official":true,"source":"https://dobinsonusa.com/instructions/","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-mt64","slug":"old-man-emu-mt64-matched-load-system","path":"/products/old-man-emu-mt64-matched-load-system","name":"MT64 · matched load system","brand":"Old Man Emu","brandPath":"/brands/old-man-emu","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"id":"sus-mt64","brand":"OLD MAN EMU","name":"MT64 · matched load system","sku":"2118K","image":"mt64","price":3143,"lift":"1.75–3 in / 2 in","damper":"MT64 monotube · 64 mm piston","adjust":"Front snap-ring height · fixed damping","load":"Front: Stock load · 0 lb added; rear: Stock load · 0 lb added","included":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","uca":true,"correction":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","hmin":5,"hmax":7,"basis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","offers":[{"seller":"LC250Mods","price":3143,"url":"https://lc250mods.com/old-man-emu-2-3-mt64-monotube-suspension-kit-stock-weight-w-uca-24-land-cruiser/"},{"seller":"ARB USA","price":3245.6,"url":"https://store.arbusa.com/mt64-kit-w-uca-fr-3-in-0-lb-rr-2-in-0-lb-2118k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","explain":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","frontLoad":"Stock load · 0 lb added","rearLoad":"Stock load · 0 lb added","choice":["stock","stock"],"configLabel":"Front Stock load · 0 lb added / Rear Stock load · 0 lb added","from":false,"loadNote":"OME’s 440 lb and 880 lb rear figures are nominal load designations, not published 0–440 or 0–880 lb ranges. Confirm suitability with ARB for your actual load. All five configurations here include UCAs. Stock-front / 880 lb rear is not offered here because a matching complete-kit SKU has not been verified.","source":"https://store.arbusa.com/mt64-kit-w-uca-fr-3-in-0-lb-rr-2-in-0-lb-2118k/","springParts":"Factory-matched front assemblies and rear springs in 2118K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Stock load · 0 lb added / Rear Stock load · 0 lb added","url":"/products/old-man-emu-mt64-matched-load-system?front=stock&rear=stock","priceAmount":3143,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=AvZ5grwbcY8","title":"MT64 Suspension Installation","creator":"ARB4x4","scope":"Manufacturer · product family","note":"MT64 installation reference. Does not establish the exact LC250 kit, spring load selection or included supporting hardware."},{"url":"https://www.youtube.com/watch?v=S6tMSKHmW0Y","title":"Installing a Lift in the 250: How Does it Compare to Stock?","creator":"KAON","scope":"LC250 / Prado · MT64 install example","note":"LC250/Prado installation and comparison. Market, powertrain, spring selection and hardware can differ from the US kit in your build."}],"reviews":[{"id":"mt64-click","productIds":["sus-mt64"],"author":"ar4390LC","date":"2026-06-27","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"LC250; front clip/spring configuration unconfirmed","summary":"Reports persistent front-shock clicking after replacement, extra labor and responsive ARB support; later says ARB offered BP-51s.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-onyx","productIds":["sus-mt64"],"author":"Onyx","date":"2026-07-09","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 LC250 with OME arms and rear springs","summary":"Reports roughly a year without clicking or other problems.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-mluk","productIds":["sus-mt64"],"author":"mluk","date":"2026-10-05","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 Land Cruiser Premium","summary":"Reports several thousand miles, including dirt driving, without issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-mt64","brand":"OLD MAN EMU","name":"MT64 · matched load system","sku":"2120K","image":"mt64","price":3245.6,"lift":"1.75–3 in / 2 in","damper":"MT64 monotube · 64 mm piston","adjust":"Front snap-ring height · fixed damping","load":"Front: Stock load · 0 lb added; rear: 440 lb nominal constant load","included":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","uca":true,"correction":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","hmin":5,"hmax":7,"basis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":3245.6,"url":"https://store.arbusa.com/mt64-kit-w-uca-fr-3-in-0-lb-rr-2-in-440-lb-2120k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","explain":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","frontLoad":"Stock load · 0 lb added","rearLoad":"440 lb nominal constant load","choice":["stock","440"],"configLabel":"Front Stock load · 0 lb added / Rear 440 lb nominal constant load","from":false,"loadNote":"OME’s 440 lb and 880 lb rear figures are nominal load designations, not published 0–440 or 0–880 lb ranges. Confirm suitability with ARB for your actual load. All five configurations here include UCAs. Stock-front / 880 lb rear is not offered here because a matching complete-kit SKU has not been verified.","source":"https://store.arbusa.com/mt64-kit-w-uca-fr-3-in-0-lb-rr-2-in-440-lb-2120k/","springParts":"Factory-matched front assemblies and rear springs in 2120K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front Stock load · 0 lb added / Rear 440 lb nominal constant load","url":"/products/old-man-emu-mt64-matched-load-system?front=stock&rear=440","priceAmount":3245.6,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=AvZ5grwbcY8","title":"MT64 Suspension Installation","creator":"ARB4x4","scope":"Manufacturer · product family","note":"MT64 installation reference. Does not establish the exact LC250 kit, spring load selection or included supporting hardware."},{"url":"https://www.youtube.com/watch?v=S6tMSKHmW0Y","title":"Installing a Lift in the 250: How Does it Compare to Stock?","creator":"KAON","scope":"LC250 / Prado · MT64 install example","note":"LC250/Prado installation and comparison. Market, powertrain, spring selection and hardware can differ from the US kit in your build."}],"reviews":[{"id":"mt64-click","productIds":["sus-mt64"],"author":"ar4390LC","date":"2026-06-27","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"LC250; front clip/spring configuration unconfirmed","summary":"Reports persistent front-shock clicking after replacement, extra labor and responsive ARB support; later says ARB offered BP-51s.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-onyx","productIds":["sus-mt64"],"author":"Onyx","date":"2026-07-09","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 LC250 with OME arms and rear springs","summary":"Reports roughly a year without clicking or other problems.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-mluk","productIds":["sus-mt64"],"author":"mluk","date":"2026-10-05","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 Land Cruiser Premium","summary":"Reports several thousand miles, including dirt driving, without issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-mt64","brand":"OLD MAN EMU","name":"MT64 · matched load system","sku":"2123K","image":"mt64","price":3245.6,"lift":"1.75–3 in / 2 in","damper":"MT64 monotube · 64 mm piston","adjust":"Front snap-ring height · fixed damping","load":"Front: 220–330 lb added; rear: Stock load · 0 lb added","included":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","uca":true,"correction":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","hmin":5,"hmax":7,"basis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":3245.6,"url":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-0lb-2123k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","explain":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","frontLoad":"220–330 lb added","rearLoad":"Stock load · 0 lb added","choice":["loaded","stock"],"configLabel":"Front 220–330 lb added / Rear Stock load · 0 lb added","from":false,"loadNote":"OME’s 440 lb and 880 lb rear figures are nominal load designations, not published 0–440 or 0–880 lb ranges. Confirm suitability with ARB for your actual load. All five configurations here include UCAs. Stock-front / 880 lb rear is not offered here because a matching complete-kit SKU has not been verified.","source":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-0lb-2123k/","springParts":"Factory-matched front assemblies and rear springs in 2123K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 220–330 lb added / Rear Stock load · 0 lb added","url":"/products/old-man-emu-mt64-matched-load-system?front=loaded&rear=stock","priceAmount":3245.6,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=AvZ5grwbcY8","title":"MT64 Suspension Installation","creator":"ARB4x4","scope":"Manufacturer · product family","note":"MT64 installation reference. Does not establish the exact LC250 kit, spring load selection or included supporting hardware."},{"url":"https://www.youtube.com/watch?v=S6tMSKHmW0Y","title":"Installing a Lift in the 250: How Does it Compare to Stock?","creator":"KAON","scope":"LC250 / Prado · MT64 install example","note":"LC250/Prado installation and comparison. Market, powertrain, spring selection and hardware can differ from the US kit in your build."}],"reviews":[{"id":"mt64-click","productIds":["sus-mt64"],"author":"ar4390LC","date":"2026-06-27","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"LC250; front clip/spring configuration unconfirmed","summary":"Reports persistent front-shock clicking after replacement, extra labor and responsive ARB support; later says ARB offered BP-51s.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-onyx","productIds":["sus-mt64"],"author":"Onyx","date":"2026-07-09","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 LC250 with OME arms and rear springs","summary":"Reports roughly a year without clicking or other problems.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-mluk","productIds":["sus-mt64"],"author":"mluk","date":"2026-10-05","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 Land Cruiser Premium","summary":"Reports several thousand miles, including dirt driving, without issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-mt64","brand":"OLD MAN EMU","name":"MT64 · matched load system","sku":"2126K","image":"mt64","price":3245.6,"lift":"1.75–3 in / 2 in","damper":"MT64 monotube · 64 mm piston","adjust":"Front snap-ring height · fixed damping","load":"Front: 220–330 lb added; rear: 440 lb nominal constant load","included":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","uca":true,"correction":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","hmin":5,"hmax":7,"basis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":3245.6,"url":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-440lbs-2126k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","explain":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","frontLoad":"220–330 lb added","rearLoad":"440 lb nominal constant load","choice":["loaded","440"],"configLabel":"Front 220–330 lb added / Rear 440 lb nominal constant load","from":false,"loadNote":"OME’s 440 lb and 880 lb rear figures are nominal load designations, not published 0–440 or 0–880 lb ranges. Confirm suitability with ARB for your actual load. All five configurations here include UCAs. Stock-front / 880 lb rear is not offered here because a matching complete-kit SKU has not been verified.","source":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-440lbs-2126k/","springParts":"Factory-matched front assemblies and rear springs in 2126K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 220–330 lb added / Rear 440 lb nominal constant load","url":"/products/old-man-emu-mt64-matched-load-system?front=loaded&rear=440","priceAmount":3245.6,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=AvZ5grwbcY8","title":"MT64 Suspension Installation","creator":"ARB4x4","scope":"Manufacturer · product family","note":"MT64 installation reference. Does not establish the exact LC250 kit, spring load selection or included supporting hardware."},{"url":"https://www.youtube.com/watch?v=S6tMSKHmW0Y","title":"Installing a Lift in the 250: How Does it Compare to Stock?","creator":"KAON","scope":"LC250 / Prado · MT64 install example","note":"LC250/Prado installation and comparison. Market, powertrain, spring selection and hardware can differ from the US kit in your build."}],"reviews":[{"id":"mt64-click","productIds":["sus-mt64"],"author":"ar4390LC","date":"2026-06-27","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"LC250; front clip/spring configuration unconfirmed","summary":"Reports persistent front-shock clicking after replacement, extra labor and responsive ARB support; later says ARB offered BP-51s.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-onyx","productIds":["sus-mt64"],"author":"Onyx","date":"2026-07-09","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 LC250 with OME arms and rear springs","summary":"Reports roughly a year without clicking or other problems.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-mluk","productIds":["sus-mt64"],"author":"mluk","date":"2026-10-05","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 Land Cruiser Premium","summary":"Reports several thousand miles, including dirt driving, without issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-mt64","brand":"OLD MAN EMU","name":"MT64 · matched load system","sku":"2128K","image":"mt64","price":3243.7,"lift":"1.75–3 in / 2 in","damper":"MT64 monotube · 64 mm piston","adjust":"Front snap-ring height · fixed damping","load":"Front: 220–330 lb added; rear: 880 lb nominal constant load","included":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","uca":true,"correction":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","hmin":5,"hmax":7,"basis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":3243.7,"url":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-880lbs-2128k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers","explain":"UCAs included. Check rear axle centering and alignment with the installer; avoid buying duplicate arms.","frontLoad":"220–330 lb added","rearLoad":"880 lb nominal constant load","choice":["loaded","880"],"configLabel":"Front 220–330 lb added / Rear 880 lb nominal constant load","from":false,"loadNote":"OME’s 440 lb and 880 lb rear figures are nominal load designations, not published 0–440 or 0–880 lb ranges. Confirm suitability with ARB for your actual load. All five configurations here include UCAs. Stock-front / 880 lb rear is not offered here because a matching complete-kit SKU has not been verified.","source":"https://store.arbusa.com/mt64-kit-w-uca-fr-3in-220-330lbs-rr-2in-880lbs-2128k/","springParts":"Factory-matched front assemblies and rear springs in 2128K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 220–330 lb added / Rear 880 lb nominal constant load","url":"/products/old-man-emu-mt64-matched-load-system?front=loaded&rear=880","priceAmount":3243.7,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[5,7],"installBasis":"Planning inference adds control-arm and spacer work to spring/shock installation. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs, brake-line and rear sway-bar spacers"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=AvZ5grwbcY8","title":"MT64 Suspension Installation","creator":"ARB4x4","scope":"Manufacturer · product family","note":"MT64 installation reference. Does not establish the exact LC250 kit, spring load selection or included supporting hardware."},{"url":"https://www.youtube.com/watch?v=S6tMSKHmW0Y","title":"Installing a Lift in the 250: How Does it Compare to Stock?","creator":"KAON","scope":"LC250 / Prado · MT64 install example","note":"LC250/Prado installation and comparison. Market, powertrain, spring selection and hardware can differ from the US kit in your build."}],"reviews":[{"id":"mt64-click","productIds":["sus-mt64"],"author":"ar4390LC","date":"2026-06-27","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"LC250; front clip/spring configuration unconfirmed","summary":"Reports persistent front-shock clicking after replacement, extra labor and responsive ARB support; later says ARB offered BP-51s.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-onyx","productIds":["sus-mt64"],"author":"Onyx","date":"2026-07-09","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 LC250 with OME arms and rear springs","summary":"Reports roughly a year without clicking or other problems.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"mt64-mluk","productIds":["sus-mt64"],"author":"mluk","date":"2026-10-05","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 MT64 system; exact spring choice unconfirmed","context":"2025 Land Cruiser Premium","summary":"Reports several thousand miles, including dirt driving, without issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"sus-icon","slug":"icon-vehicle-dynamics-stage-3-tubular-uca","path":"/products/icon-vehicle-dynamics-stage-3-tubular-uca","name":"Stage 3 · tubular UCA","brand":"ICON Vehicle Dynamics","brandPath":"/brands/icon-vehicle-dynamics","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"id":"sus-icon","brand":"ICON VEHICLE DYNAMICS","name":"Stage 3 · tubular UCA","sku":"K53363T","image":"icon","price":3852.5,"lift":"1.25–3 in / 2 in","damper":"Front 2.5 VS / rear 2.0 · internal reservoirs","adjust":"Threaded front height · fixed damping","load":"Dual-rate rear springs; added-load rating unconfirmed","included":"Front coilovers, rear shocks, rear springs, tubular UCAs, differential drop and adjustable rear track bar","uca":true,"correction":"Major correction parts included. ICON calls for ADAS recalibration after installation; quote separately.","hmin":6,"hmax":8,"basis":"ICON publishes 3 hours for the FRONT COILOVERS ONLY (58691). Our 6–8 hour whole-system planning range adds rear suspension, arms, diff drop and track bar. This is an inference, not a manufacturer whole-kit time.","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","offers":[{"seller":"LC250Mods","price":3852.5,"url":"https://lc250mods.com/icon-stage-3-suspension-system-1-25-3-lift-24-land-cruiser/"},{"seller":"ICON","price":3852.7,"url":"https://iconvehicledynamics.com/products/k53363t"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, tubular UCAs, differential drop and adjustable rear track bar","explain":"Major correction parts included. ICON calls for ADAS recalibration after installation; quote separately.","label":"Front coilovers, rear shocks, rear springs, tubular UCAs, differential drop and adjustable rear track bar","choice":null,"url":"/products/icon-vehicle-dynamics-stage-3-tubular-uca","priceAmount":3852.5,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[6,8],"installBasis":"ICON publishes 3 hours for the FRONT COILOVERS ONLY (58691). Our 6–8 hour whole-system planning range adds rear suspension, arms, diff drop and track bar. This is an inference, not a manufacturer whole-kit time.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, tubular UCAs, differential drop and adjustable rear track bar"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"icon-front-ir","productIds":["sus-icon","sus-icon1"],"type":"manual","title":"58691 LC250 front coilover instructions","url":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","publisher":"ICON Vehicle Dynamics","scope":"Front coilover component · 58691","note":"Front coilovers only; required differential-drop instructions, rear springs/shocks and control arms are separate. Confirm the part list for your stage.","match":"component","official":true,"source":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","purpose":"installation","checked":"2026-10-25"},{"id":"icon-library","productIds":["sus-icon","sus-icon1","sus-icon5","sus-icon7"],"type":"library","title":"ICON instruction manuals and downloads","url":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","publisher":"ICON Vehicle Dynamics","scope":"Library · supporting kit components","note":"Use the actual component numbers for rear shocks/springs, arms, links and differential drop. Some product-page Installation Guide links resolve to warranty documents; those were not counted.","match":"reference","official":true,"source":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-bp51","slug":"old-man-emu-bp-51-matched-load-system","path":"/products/old-man-emu-bp-51-matched-load-system","name":"BP-51 · matched load system","brand":"Old Man Emu","brandPath":"/brands/old-man-emu","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":1,"variants":[{"id":"sus-bp51","brand":"OLD MAN EMU","name":"BP-51 · matched load system","sku":"2220K","image":"bp51","price":4280.55,"lift":"3 in / 2 in","damper":"Internal bypass · remote reservoirs","adjust":"Compression and rebound adjustment","load":"Front: 0–330 lb added; rear: Stock load · 0 lb added","included":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","uca":true,"correction":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","hmin":6,"hmax":8,"basis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":4280.55,"url":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-0-lb-2220k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","explain":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","frontLoad":"0–330 lb added","rearLoad":"Stock load · 0 lb added","choice":["adjustable","stock"],"configLabel":"Front 0–330 lb added / Rear Stock load · 0 lb added","from":false,"loadNote":"Rear figures are OME nominal constant-load designations, not maximum payloads or continuous ranges. Front preload and setup must match the fitted equipment; the 0–330 lb designation does not mean every setup produces identical ride height.","source":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-0-lb-2220k/","springParts":"Factory-matched front assemblies and rear springs in 2220K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 0–330 lb added / Rear Stock load · 0 lb added","url":"/products/old-man-emu-bp-51-matched-load-system?front=adjustable&rear=stock","priceAmount":4280.55,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[6,8],"installBasis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"bp51-road","productIds":["sus-bp51"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; catalog load configuration differs","context":"LC250 with 3-inch BP-51 setup, Method 703 and 35-inch Toyos","summary":"Describes a more fluid, softer ride at the initial settings; notes damping can be adjusted.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"bp51-leak","productIds":["sus-bp51"],"author":"TEQJ250","date":"2026-07-18","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; unresolved individual report","context":"LC250; exact spring/damper revision unconfirmed","summary":"Reports rear shocks leaking about a month after installation and arranging a shop inspection.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-bp51","brand":"OLD MAN EMU","name":"BP-51 · matched load system","sku":"2221K","image":"bp51","price":4280.55,"lift":"3 in / 2 in","damper":"Internal bypass · remote reservoirs","adjust":"Compression and rebound adjustment","load":"Front: 0–330 lb added; rear: 440 lb nominal constant load","included":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","uca":true,"correction":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","hmin":6,"hmax":8,"basis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":4280.55,"url":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-440-lb-2221k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","explain":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","frontLoad":"0–330 lb added","rearLoad":"440 lb nominal constant load","choice":["adjustable","440"],"configLabel":"Front 0–330 lb added / Rear 440 lb nominal constant load","from":false,"loadNote":"Rear figures are OME nominal constant-load designations, not maximum payloads or continuous ranges. Front preload and setup must match the fitted equipment; the 0–330 lb designation does not mean every setup produces identical ride height.","source":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-440-lb-2221k/","springParts":"Factory-matched front assemblies and rear springs in 2221K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 0–330 lb added / Rear 440 lb nominal constant load","url":"/products/old-man-emu-bp-51-matched-load-system?front=adjustable&rear=440","priceAmount":4280.55,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[6,8],"installBasis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"bp51-road","productIds":["sus-bp51"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; catalog load configuration differs","context":"LC250 with 3-inch BP-51 setup, Method 703 and 35-inch Toyos","summary":"Describes a more fluid, softer ride at the initial settings; notes damping can be adjusted.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"bp51-leak","productIds":["sus-bp51"],"author":"TEQJ250","date":"2026-07-18","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; unresolved individual report","context":"LC250; exact spring/damper revision unconfirmed","summary":"Reports rear shocks leaking about a month after installation and arranging a shop inspection.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"sus-bp51","brand":"OLD MAN EMU","name":"BP-51 · matched load system","sku":"2222K","image":"bp51","price":4280.55,"lift":"3 in / 2 in","damper":"Internal bypass · remote reservoirs","adjust":"Compression and rebound adjustment","load":"Front: 0–330 lb added; rear: 880 lb nominal constant load","included":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","uca":true,"correction":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","hmin":6,"hmax":8,"basis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","offers":[{"seller":"ARB USA","price":4280.55,"url":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-880-lb-2222k/"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits","explain":"Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.","frontLoad":"0–330 lb added","rearLoad":"880 lb nominal constant load","choice":["adjustable","880"],"configLabel":"Front 0–330 lb added / Rear 880 lb nominal constant load","from":false,"loadNote":"Rear figures are OME nominal constant-load designations, not maximum payloads or continuous ranges. Front preload and setup must match the fitted equipment; the 0–330 lb designation does not mean every setup produces identical ride height.","source":"https://store.arbusa.com/bp-51-kit-w-uca-fr-3-in-0-330-lb-rr-2-in-880-lb-2222k/","springParts":"Factory-matched front assemblies and rear springs in 2222K. Confirm individual spring SKUs against the supplier’s packing list.","label":"Front 0–330 lb added / Rear 880 lb nominal constant load","url":"/products/old-man-emu-bp-51-matched-load-system?front=adjustable&rear=880","priceAmount":4280.55,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.","installHours":[6,8],"installBasis":"Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"ome-install-tips","productIds":["sus-mt64","sus-bp51"],"type":"guide","title":"Old Man Emu installation tips","url":"https://arbusa.com/news/old-man-emu-install-tips","publisher":"ARB / Old Man Emu","scope":"General OME suspension installation · not a complete LC250 kit manual","note":"Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.","match":"general","official":true,"source":"https://arbusa.com/news/old-man-emu-install-tips","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[{"id":"bp51-road","productIds":["sus-bp51"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; catalog load configuration differs","context":"LC250 with 3-inch BP-51 setup, Method 703 and 35-inch Toyos","summary":"Describes a more fluid, softer ride at the initial settings; notes damping can be adjusted.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"bp51-leak","productIds":["sus-bp51"],"author":"TEQJ250","date":"2026-07-18","source":"https://www.landcruiserforum.com/threads/old-man-emu-mt64-awareness-thread.9424/page-2","sourceName":"Owner forum report","kind":"owner","scope":"LC250 BP-51 family; unresolved individual report","context":"LC250; exact spring/damper revision unconfirmed","summary":"Reports rear shocks leaking about a month after installation and arranging a shop inspection.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"sus-icon1","slug":"icon-vehicle-dynamics-stage-1-internal-reservoir","path":"/products/icon-vehicle-dynamics-stage-1-internal-reservoir","name":"Stage 1 · internal reservoir","brand":"ICON Vehicle Dynamics","brandPath":"/brands/icon-vehicle-dynamics","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"ICON VEHICLE DYNAMICS","lift":"1.25–3 in / 2 in","adjust":"Threaded front height · fixed damping","load":"Numeric front / rear constant-load bands not verified. Stock-equipment lift figures change with accessory weight.","rearSprings":true,"fitment":"2024–2026 LC250 · confirm exact grade","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","id":"sus-icon1","name":"Stage 1 · internal reservoir","sku":"K53361","image":"icon1","price":2538.47,"damper":"Front 2.5 / rear 2.0 · internal reservoirs","uca":false,"included":"Front 58691 coilover pair, rear 56520 shocks ×2, 52752 rear spring pair and 55160 differential drop","correction":"UCAs are not included. ICON recommends Delta Joint Pro UCAs above 2 inches of lift. Rear track-bar correction is recommended, not included. ADAS recalibration is required by ICON.","hmin":5,"hmax":7,"basis":"Researched planning range for coilovers, rear shocks / springs and differential drop. ICON publishes 3 hours for the front coilovers only; the balance covers rear and differential work. Alignment and ADAS calibration excluded.","offers":[{"seller":"ICON","price":2538.47,"url":"https://iconvehicledynamics.com/products/k53361"},{"seller":"Shock Surplus","price":2538.47,"url":"https://www.shocksurplus.com/products/icon-1-25-3-lift-stage-1-suspension-system-kit-for-2024-2025-toyota-land-cruiser"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front 58691 coilover pair, rear 56520 shocks ×2, 52752 rear spring pair and 55160 differential drop","explain":"UCAs are not included. ICON recommends Delta Joint Pro UCAs above 2 inches of lift. Rear track-bar correction is recommended, not included. ADAS recalibration is required by ICON.","label":"Front 58691 coilover pair, rear 56520 shocks ×2, 52752 rear spring pair and 55160 differential drop","choice":null,"url":"/products/icon-vehicle-dynamics-stage-1-internal-reservoir","priceAmount":2538.47,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024–2026 LC250 · confirm exact grade","installHours":[5,7],"installBasis":"Researched planning range for coilovers, rear shocks / springs and differential drop. ICON publishes 3 hours for the front coilovers only; the balance covers rear and differential work. Alignment and ADAS calibration excluded.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front 58691 coilover pair, rear 56520 shocks ×2, 52752 rear spring pair and 55160 differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"UCAs are not included. ICON recommends Delta Joint Pro UCAs above 2 inches of lift. Rear track-bar correction is recommended, not included. ADAS recalibration is required by ICON.","page":"suspension"}],"documents":[{"id":"icon-front-ir","productIds":["sus-icon","sus-icon1"],"type":"manual","title":"58691 LC250 front coilover instructions","url":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","publisher":"ICON Vehicle Dynamics","scope":"Front coilover component · 58691","note":"Front coilovers only; required differential-drop instructions, rear springs/shocks and control arms are separate. Confirm the part list for your stage.","match":"component","official":true,"source":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","purpose":"installation","checked":"2026-10-25"},{"id":"icon-library","productIds":["sus-icon","sus-icon1","sus-icon5","sus-icon7"],"type":"library","title":"ICON instruction manuals and downloads","url":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","publisher":"ICON Vehicle Dynamics","scope":"Library · supporting kit components","note":"Use the actual component numbers for rear shocks/springs, arms, links and differential drop. Some product-page Installation Guide links resolve to warranty documents; those were not counted.","match":"reference","official":true,"source":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-icon5","slug":"icon-vehicle-dynamics-stage-5-remote-reservoir","path":"/products/icon-vehicle-dynamics-stage-5-remote-reservoir","name":"Stage 5 · remote reservoir","brand":"ICON Vehicle Dynamics","brandPath":"/brands/icon-vehicle-dynamics","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"ICON VEHICLE DYNAMICS","lift":"1.25–3 in / 2 in","adjust":"Threaded front height · fixed damping","load":"Numeric front / rear constant-load bands not verified. Stock-equipment lift figures change with accessory weight.","rearSprings":true,"fitment":"2024–2026 LC250 · confirm exact grade","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","id":"sus-icon5","name":"Stage 5 · remote reservoir","sku":"K53365T","image":"icon5","price":4382.77,"damper":"Front & rear 2.5 · remote reservoirs","uca":true,"included":"Front 58791 coilover pair, 57870P rear shock pair, 52752 rear springs, tubular 58452DJ UCAs and 55160 differential drop","correction":"UCAs and differential drop included. ICON recommends an adjustable rear track bar; it is not included in Stage 5. ADAS recalibration required by ICON.","hmin":6,"hmax":8,"basis":"Researched range adds rear springs, arms, differential drop and reservoir mounting to front coilover work. ICON’s 3-hour front-coilover time is a component reference, not a Stage 5 total.","offers":[{"seller":"GoTurbo","price":4382.77,"url":"https://goturbo.net/icok53365t-icon-2024-land-cruiser-250-series-1-25-3in-lift-stage-5-suspension-system-tubular-uca-k53365t"},{"seller":"ICON","price":4648.21,"url":"https://iconvehicledynamics.com/products/K53365T"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front 58791 coilover pair, 57870P rear shock pair, 52752 rear springs, tubular 58452DJ UCAs and 55160 differential drop","explain":"UCAs and differential drop included. ICON recommends an adjustable rear track bar; it is not included in Stage 5. ADAS recalibration required by ICON.","label":"Front 58791 coilover pair, 57870P rear shock pair, 52752 rear springs, tubular 58452DJ UCAs and 55160 differential drop","choice":null,"url":"/products/icon-vehicle-dynamics-stage-5-remote-reservoir","priceAmount":4382.77,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024–2026 LC250 · confirm exact grade","installHours":[6,8],"installBasis":"Researched range adds rear springs, arms, differential drop and reservoir mounting to front coilover work. ICON’s 3-hour front-coilover time is a component reference, not a Stage 5 total.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front 58791 coilover pair, 57870P rear shock pair, 52752 rear springs, tubular 58452DJ UCAs and 55160 differential drop"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"icon-front-cdcv","productIds":["sus-icon5","sus-icon7"],"type":"manual","title":"58791C LC250 remote-reservoir coilover instructions","url":"https://images.iconfigurators.app/pdf/I58791C_REVA_2962.pdf","publisher":"ICON Vehicle Dynamics","scope":"Component reference · 58791C CDCV coilover","note":"Confirm the selected kit contains 58791C before use. Not an instruction set for CDEV or all Stage 5/7 components.","match":"component","official":true,"source":"https://images.iconfigurators.app/pdf/I58791C_REVA_2962.pdf","purpose":"installation","checked":"2026-10-25"},{"id":"icon-library","productIds":["sus-icon","sus-icon1","sus-icon5","sus-icon7"],"type":"library","title":"ICON instruction manuals and downloads","url":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","publisher":"ICON Vehicle Dynamics","scope":"Library · supporting kit components","note":"Use the actual component numbers for rear shocks/springs, arms, links and differential drop. Some product-page Installation Guide links resolve to warranty documents; those were not counted.","match":"reference","official":true,"source":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-icon7","slug":"icon-vehicle-dynamics-stage-7-rear-links-track-bar","path":"/products/icon-vehicle-dynamics-stage-7-rear-links-track-bar","name":"Stage 7 · rear links & track bar","brand":"ICON Vehicle Dynamics","brandPath":"/brands/icon-vehicle-dynamics","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"ICON VEHICLE DYNAMICS","lift":"1.25–3 in / 2 in","adjust":"Threaded front height · fixed damping","load":"Numeric front / rear constant-load bands not verified. Stock-equipment lift figures change with accessory weight.","rearSprings":true,"fitment":"2024–2025 LC250 per listed page; confirm later years","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","id":"sus-icon7","name":"Stage 7 · rear links & track bar","sku":"K53367T","image":"icon7","price":5875.45,"damper":"Front & rear 2.5 · remote reservoirs","uca":true,"included":"Stage 5 hardware plus 54202 adjustable billet rear track bar and 54003T tubular rear lower links","correction":"UCAs, differential drop, rear track bar and rear lower links included. Upper links are a separate option. ADAS recalibration required by ICON.","hmin":8,"hmax":10,"basis":"Researched planning range includes the Stage 5 installation scope plus rear lower links, track-bar replacement and setup. No manufacturer whole-system time verified.","offers":[{"seller":"ICON","price":5875.45,"url":"https://iconvehicledynamics.com/products/k53367t"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Stage 5 hardware plus 54202 adjustable billet rear track bar and 54003T tubular rear lower links","explain":"UCAs, differential drop, rear track bar and rear lower links included. Upper links are a separate option. ADAS recalibration required by ICON.","label":"Stage 5 hardware plus 54202 adjustable billet rear track bar and 54003T tubular rear lower links","choice":null,"url":"/products/icon-vehicle-dynamics-stage-7-rear-links-track-bar","priceAmount":5875.45,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024–2025 LC250 per listed page; confirm later years","installHours":[8,10],"installBasis":"Researched planning range includes the Stage 5 installation scope plus rear lower links, track-bar replacement and setup. No manufacturer whole-system time verified.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Stage 5 hardware plus 54202 adjustable billet rear track bar and 54003T tubular rear lower links"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Upper control arms","status":"included","detail":"Listed as included in this kit. Confirm the selected variant and packing list."}],"documents":[{"id":"icon-front-cdcv","productIds":["sus-icon5","sus-icon7"],"type":"manual","title":"58791C LC250 remote-reservoir coilover instructions","url":"https://images.iconfigurators.app/pdf/I58791C_REVA_2962.pdf","publisher":"ICON Vehicle Dynamics","scope":"Component reference · 58791C CDCV coilover","note":"Confirm the selected kit contains 58791C before use. Not an instruction set for CDEV or all Stage 5/7 components.","match":"component","official":true,"source":"https://images.iconfigurators.app/pdf/I58791C_REVA_2962.pdf","purpose":"installation","checked":"2026-10-25"},{"id":"icon-library","productIds":["sus-icon","sus-icon1","sus-icon5","sus-icon7"],"type":"library","title":"ICON instruction manuals and downloads","url":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","publisher":"ICON Vehicle Dynamics","scope":"Library · supporting kit components","note":"Use the actual component numbers for rear shocks/springs, arms, links and differential drop. Some product-page Installation Guide links resolve to warranty documents; those were not counted.","match":"reference","official":true,"source":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","purpose":"support","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-king-standard","slug":"king-shocks-2-5-package-fixed-damping-links","path":"/products/king-shocks-2-5-package-fixed-damping-links","name":"2.5 package · fixed damping + links","brand":"KING SHOCKS","brandPath":"/brands/king-shocks","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"KING SHOCKS","lift":"Adjustable front / 0 in rear with factory springs","damper":"2.5 monotube · remote reservoirs front & rear","load":"Request a spring-rate and valving recommendation from King for your finished build. No numeric constant-load bands verified.","rearSprings":false,"packageOnly":true,"uca":false,"fitment":"2024+ LC250 · verify sway-bar equipment","hmin":4,"hmax":6,"basis":"Researched 4–6 hour planning range for front coilovers, rear shocks, reservoir mounts and the included front/rear sway-bar links. King INS-T065 documents the front work; the comparable ICON front-coilover manual publishes 3 hours. Remaining package work is a planning inference, not a published King time.","basisUrl":"https://kingshocks.com/pdf/184576","correction":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","support":["Confirm rear spring choice for final constant load; rear lift springs are extra if rear lift is desired.","Confirm control-arm and geometry requirements at the selected front height."],"manufacturerSources":[["King 20001-293 sway-bar link kit","https://kingshocks.com/i-30508139-20001-293-24-toyota-land-cruiser-250-25-4runner-sway-bar-links.html"],["King LC250 applications","https://kingshocks.com/ag-1785061-land-cruiser-250.html"]],"id":"sus-king-standard","name":"2.5 package · fixed damping + links","sku":"25001-415 / 25001-416 / 20001-293","image":"king-standard","price":3429.5,"adjust":"Front ride height · fixed compression damping","included":"Front 25001-415 coilover pair, rear 25001-416 shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","offers":[{"seller":"SDHQ · No / Yes variant","price":3429.5,"url":"https://store.sdhqoffroad.com/products/24-lc250-gx550-complete-king-shock-package?variant=44234097328228"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front 25001-415 coilover pair, rear 25001-416 shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","explain":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","label":"Front 25001-415 coilover pair, rear 25001-416 shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","choice":null,"url":"/products/king-shocks-2-5-package-fixed-damping-links","priceAmount":3429.5,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024+ LC250 · verify sway-bar equipment","installHours":[4,6],"installBasis":"Researched 4–6 hour planning range for front coilovers, rear shocks, reservoir mounts and the included front/rear sway-bar links. King INS-T065 documents the front work; the comparable ICON front-coilover manual publishes 3 hours. Remaining package work is a planning inference, not a published King time.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front 25001-415 coilover pair, rear 25001-416 shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Suitable rear springs","status":"check","detail":"Rear springs are not included. Confirm that the retained factory springs suit the final load and height, or obtain a quote for matched replacement springs.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","page":"suspension"}],"documents":[{"id":"king-front","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T065 · LC250 2.5 front coilovers","url":"https://kingshocks.com/pdf/184578","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Lists 25001-415; confirm applicability to the adjustable 25001-415A revision. Front coilovers only. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184578","purpose":"installation","checked":"2026-10-25"},{"id":"king-rear","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T066 · LC250 2.5 rear shocks","url":"https://kingshocks.com/pdf/184560","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Lists 25001-416; confirm applicability to the adjustable 25001-416A revision. Rear shocks only. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184560","purpose":"installation","checked":"2026-10-25"},{"id":"king-link-front","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T067 · LC250 front sway-bar links","url":"https://kingshocks.com/pdf/184662","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Manufacturer links this sheet from the 20001-293 LC250 sway-bar link kit. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184662","purpose":"installation","checked":"2026-10-25"},{"id":"king-link-rear","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T047 · LC250 rear sway-bar links","url":"https://kingshocks.com/pdf/184569","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Manufacturer links this sheet from the 20001-293 kit. Includes rear-link orientation. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184569","purpose":"installation","checked":"2026-10-25"}],"videos":[{"id":"king-installer","productIds":["sus-king-standard","sus-king-adjustable"],"type":"video","title":"LC250 King shocks and Total Chaos UCA installation","url":"https://www.youtube.com/watch?v=04uBpPis1SY","publisher":"Taco Garage","scope":"Independent installer · LC250 example","note":"Not a King manufacturer video. Different package/arms may be shown; confirm shock variants, rear springs and sway-bar link instructions.","match":"component","official":false,"source":"https://www.youtube.com/watch?v=04uBpPis1SY","purpose":"installation","checked":"2026-10-25","creator":"Taco Garage"}],"reviews":[],"clearance":null}]},{"id":"sus-king-adjustable","slug":"king-shocks-2-5-package-adjustable-links","path":"/products/king-shocks-2-5-package-adjustable-links","name":"2.5 package · adjustable + links","brand":"KING SHOCKS","brandPath":"/brands/king-shocks","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"KING SHOCKS","lift":"Adjustable front / 0 in rear with factory springs","damper":"2.5 monotube · remote reservoirs front & rear","load":"Request a spring-rate and valving recommendation from King for your finished build. No numeric constant-load bands verified.","rearSprings":false,"packageOnly":true,"uca":false,"fitment":"2024+ LC250 · verify sway-bar equipment","hmin":4,"hmax":6,"basis":"Researched 4–6 hour planning range for front coilovers, rear shocks, reservoir mounts and the included front/rear sway-bar links. King INS-T065 documents the front work; the comparable ICON front-coilover manual publishes 3 hours. Remaining package work is a planning inference, not a published King time.","basisUrl":"https://kingshocks.com/pdf/184576","correction":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","support":["Confirm rear spring choice for final constant load; rear lift springs are extra if rear lift is desired.","Confirm control-arm and geometry requirements at the selected front height."],"manufacturerSources":[["King 20001-293 sway-bar link kit","https://kingshocks.com/i-30508139-20001-293-24-toyota-land-cruiser-250-25-4runner-sway-bar-links.html"],["King LC250 applications","https://kingshocks.com/ag-1785061-land-cruiser-250.html"]],"id":"sus-king-adjustable","name":"2.5 package · adjustable + links","sku":"25001-415A / 25001-416A / 20001-293","image":"king","price":3985.25,"adjust":"Front ride height · compression adjusters","included":"Front 25001-415A coilover pair, rear 25001-416A shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","offers":[{"seller":"SDHQ · Yes / Yes variant","price":3985.25,"url":"https://store.sdhqoffroad.com/products/24-lc250-gx550-complete-king-shock-package?variant=44234097262692"}],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Front 25001-415A coilover pair, rear 25001-416A shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","explain":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","label":"Front 25001-415A coilover pair, rear 25001-416A shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded","choice":null,"url":"/products/king-shocks-2-5-package-adjustable-links","priceAmount":3985.25,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024+ LC250 · verify sway-bar equipment","installHours":[4,6],"installBasis":"Researched 4–6 hour planning range for front coilovers, rear shocks, reservoir mounts and the included front/rear sway-bar links. King INS-T065 documents the front work; the comparable ICON front-coilover manual publishes 3 hours. Remaining package work is a planning inference, not a published King time.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Front 25001-415A coilover pair, rear 25001-416A shock pair and 20001-293 front/rear sway-bar link kit; rear springs and UCAs excluded"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Suitable rear springs","status":"check","detail":"Rear springs are not included. Confirm that the retained factory springs suit the final load and height, or obtain a quote for matched replacement springs.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Rear lift springs and UCAs are not included. Keep factory rear springs only if they suit the load and desired height; otherwise obtain a matched spring and geometry quote. Included King sway-bar links must match the vehicle’s sway-bar arrangement. Verify travel, brake lines and reservoir clearance.","page":"suspension"}],"documents":[{"id":"king-front","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T065 · LC250 2.5 front coilovers","url":"https://kingshocks.com/pdf/184578","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Lists 25001-415; confirm applicability to the adjustable 25001-415A revision. Front coilovers only. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184578","purpose":"installation","checked":"2026-10-25"},{"id":"king-rear","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T066 · LC250 2.5 rear shocks","url":"https://kingshocks.com/pdf/184560","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Lists 25001-416; confirm applicability to the adjustable 25001-416A revision. Rear shocks only. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184560","purpose":"installation","checked":"2026-10-25"},{"id":"king-link-front","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T067 · LC250 front sway-bar links","url":"https://kingshocks.com/pdf/184662","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Manufacturer links this sheet from the 20001-293 LC250 sway-bar link kit. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184662","purpose":"installation","checked":"2026-10-25"},{"id":"king-link-rear","productIds":["sus-king-standard","sus-king-adjustable"],"type":"manual","title":"INS-T047 · LC250 rear sway-bar links","url":"https://kingshocks.com/pdf/184569","publisher":"King Shocks","scope":"LC250 component · package contains multiple parts","note":"Manufacturer links this sheet from the 20001-293 kit. Includes rear-link orientation. Rear spring selection and any control-arm instructions remain separate.","match":"component","official":true,"source":"https://kingshocks.com/pdf/184569","purpose":"installation","checked":"2026-10-25"}],"videos":[{"id":"king-installer","productIds":["sus-king-standard","sus-king-adjustable"],"type":"video","title":"LC250 King shocks and Total Chaos UCA installation","url":"https://www.youtube.com/watch?v=04uBpPis1SY","publisher":"Taco Garage","scope":"Independent installer · LC250 example","note":"Not a King manufacturer video. Different package/arms may be shown; confirm shock variants, rear springs and sway-bar link instructions.","match":"component","official":false,"source":"https://www.youtube.com/watch?v=04uBpPis1SY","purpose":"installation","checked":"2026-10-25","creator":"Taco Garage"}],"reviews":[],"clearance":null}]},{"id":"sus-fox20","slug":"fox-2-0-performance-shock-package","path":"/products/fox-2-0-performance-shock-package","name":"2.0 Performance · shock package","brand":"FOX","brandPath":"/brands/fox","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"FOX","adjust":"Threaded front height · fixed damping","rearSprings":false,"packageOnly":true,"uca":false,"fitment":"2024–2026 LC250 · confirm exact vehicle","hmin":4,"hmax":6,"basis":"Researched 4–6 hour professional planning range for two loaded front coilovers and two rear shocks. Comparable ICON front-coilover instructions publish 3 hours; rear shock replacement and setup complete this estimate. No FOX whole-package time was verified. Rear spring changes, arms, alignment and calibration are additional.","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","support":["Rear lift / load-rated springs are not included; retain factory springs only if appropriate.","Confirm required UCAs and correction hardware before purchase."],"id":"sus-fox20","name":"2.0 Performance · shock package","sku":"985-02-157 ×2 / 985-24-274 ×2","image":"fox20","price":1719.8,"lift":"0–2.25 in front / 0 in rear with factory springs","damper":"2.0 monotube · internal floating piston","load":"Front coil springs included; numeric additional-load bands unverified. Rear load selection follows the separate rear springs.","included":"Two 985-02-157 loaded front coilovers and two 985-24-274 rear shocks; no rear springs or UCAs","correction":"Rear shocks accommodate 0–1.5 inches of rear lift; they do not lift the rear by themselves. Specify rear springs separately if needed. Confirm arm clearance, alignment and travel at the selected front height.","offers":[{"seller":"SuspensionLifts","price":1719.8,"url":"https://www.suspensionlifts.com/shop/toyota-land-cruiser/2024-2025-toyota-land-cruiser-toyota-land-cruiser/lift-kits-2024-2025-toyota-land-cruiser/fox-2-0-performance-0-2-25-front-0-1-5-rear-coilover-and-shock-kit-for-2024-2026-toyota-land-cruiser-250/"}],"manufacturerSources":[["FOX 985-02-157 front coilover","https://ridefox.com/products/toyota-and-lexus-2-0-performance-series-a4c24ec8"]],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Two 985-02-157 loaded front coilovers and two 985-24-274 rear shocks; no rear springs or UCAs","explain":"Rear shocks accommodate 0–1.5 inches of rear lift; they do not lift the rear by themselves. Specify rear springs separately if needed. Confirm arm clearance, alignment and travel at the selected front height.","label":"Two 985-02-157 loaded front coilovers and two 985-24-274 rear shocks; no rear springs or UCAs","choice":null,"url":"/products/fox-2-0-performance-shock-package","priceAmount":1719.8,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024–2026 LC250 · confirm exact vehicle","installHours":[4,6],"installBasis":"Researched 4–6 hour professional planning range for two loaded front coilovers and two rear shocks. Comparable ICON front-coilover instructions publish 3 hours; rear shock replacement and setup complete this estimate. No FOX whole-package time was verified. Rear spring changes, arms, alignment and calibration are additional.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Two 985-02-157 loaded front coilovers and two 985-24-274 rear shocks; no rear springs or UCAs"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Suitable rear springs","status":"check","detail":"Rear springs are not included. Confirm that the retained factory springs suit the final load and height, or obtain a quote for matched replacement springs.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Rear shocks accommodate 0–1.5 inches of rear lift; they do not lift the rear by themselves. Specify rear springs separately if needed. Confirm arm clearance, alignment and travel at the selected front height.","page":"suspension"}],"documents":[{"id":"fox20-manual","productIds":["sus-fox20"],"type":"manual","title":"FOX LC250 2.0 front and rear installation guide","url":"https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/605_01_421REVAWEBONLY.pdf","publisher":"FOX","scope":"Exact shock pair numbers · 985-02-157 / 985-24-274","note":"Covers front and rear shocks in the catalog package. Supporting rear springs, arms or correction hardware are outside this document.","match":"exact","official":true,"source":"https://ridefox.com/products/toyota-and-lexus-2-0-performance-series-a4c24ec8","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"sus-fox25","slug":"fox-2-5-performance-hd-shock-package","path":"/products/fox-2-5-performance-hd-shock-package","name":"2.5 Performance HD · shock package","brand":"FOX","brandPath":"/brands/fox","category":"suspension","categorySlug":"suspension","addedOn":null,"defaultIndex":0,"variants":[{"brand":"FOX","adjust":"Threaded front height · fixed damping","rearSprings":false,"packageOnly":true,"uca":false,"fitment":"2024–2026 LC250 · confirm exact vehicle","hmin":4,"hmax":6,"basis":"Researched 4–6 hour professional planning range for two loaded front coilovers and two rear shocks. Comparable ICON front-coilover instructions publish 3 hours; rear shock replacement and setup complete this estimate. No FOX whole-package time was verified. Rear spring changes, arms, alignment and calibration are additional.","basisUrl":"https://images.iconfigurators.app/pdf/I58691_REVA_4302.pdf","support":["Rear lift / load-rated springs are not included; retain factory springs only if appropriate.","Confirm required UCAs and correction hardware before purchase."],"id":"sus-fox25","name":"2.5 Performance HD · shock package","sku":"987-02-016 ×2 / 987-24-059 ×2","image":"fox25","price":2339.8,"lift":"0–2.25 in front / 0 in rear with factory springs","damper":"2.5 monotube · internal floating piston","load":"HD tune describes the damping setup; it is not a numeric spring-load rating. Verify spring rates for the actual equipment load.","included":"Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs","correction":"Seller lists aftermarket UCAs as required for body clearance; obtain the compatible arm quote. Rear shocks fit 0–2 inches of rear lift, but rear lift springs are not supplied. Confirm all geometry at the chosen height.","offers":[{"seller":"Shock Surplus","price":2339.8,"url":"https://www.shocksurplus.com/products/fox-2-5-performance-series-coilovers-rear-shocks-set-for-2024-2026-toyota-land-cruiser-250-4wd-rwd-w-0-2-25-lift-hd-tune"}],"manufacturerSources":[["FOX 987-02-016 front coilover","https://ridefox.com/products/toyota-and-lexus-2-5-performance-series-hd-tune-6ddf660c"],["FOX 987-24-059 rear shock","https://ridefox.com/products/toyota-and-lexus-2-5-performance-series-hd-tune-55cab8c8"]],"cat":"suspension","weight":null,"slot":"lift","icon":"〰","visual":"lift","realKit":true,"desc":"Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs","explain":"Seller lists aftermarket UCAs as required for body clearance; obtain the compatible arm quote. Rear shocks fit 0–2 inches of rear lift, but rear lift springs are not supplied. Confirm all geometry at the chosen height.","label":"Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs","choice":null,"url":"/products/fox-2-5-performance-hd-shock-package","priceAmount":2339.8,"priceBasis":"selected configuration","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"2024–2026 LC250 · confirm exact vehicle","installHours":[4,6],"installBasis":"Researched 4–6 hour professional planning range for two loaded front coilovers and two rear shocks. Comparable ICON front-coilover instructions publish 3 hours; rear shock replacement and setup complete this estimate. No FOX whole-package time was verified. Rear spring changes, arms, alignment and calibration are additional.","requirements":[{"label":"Listed suspension components","status":"included","detail":"Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs"},{"label":"Front / rear spring choice and final load","status":"check","detail":"Confirm spring ratings for the finished build, expected ride height and actual constant load.","page":"suspension"},{"label":"Suitable rear springs","status":"check","detail":"Rear springs are not included. Confirm that the retained factory springs suit the final load and height, or obtain a quote for matched replacement springs.","page":"suspension"},{"label":"Alignment","status":"quote","detail":"Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance."},{"label":"Control arms / correction hardware","status":"conditional","detail":"Seller lists aftermarket UCAs as required for body clearance; obtain the compatible arm quote. Rear shocks fit 0–2 inches of rear lift, but rear lift springs are not supplied. Confirm all geometry at the chosen height.","page":"suspension"}],"documents":[{"id":"fox25-general","productIds":["sus-fox25"],"type":"guide","title":"FOX direct-replacement shock installation guidance","url":"https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/605_01_053_REV_C.pdf","publisher":"FOX","scope":"General manufacturer reference · not an exact LC250 HD instruction set","note":"FOX links this generic five-page document from the 987-02-016 HD page. It does not identify all listed HD package components; request exact installation sheets before work.","match":"general","official":true,"source":"https://ridefox.com/products/toyota-and-lexus-2-5-performance-series-hd-tune-6ddf660c","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"wh-method703","slug":"method-703-matte-black-17x8-5-plus-35","path":"/products/method-703-matte-black-17x8-5-plus-35","name":"703 Bead Grip · 17×8.5 +35","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-method703","brand":"METHOD","name":"703 · Matte Black","sku":"MR70378560535","image":"method-mr70378560535","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":27.93,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-703-matte-black-17x8-5-plus-35?variant=wh-method703","source":"https://www.methodracewheels.com/products/703-matte-black?variant=39290134495293","manufacturerUrl":"https://www.methodracewheels.com/products/703-matte-black?variant=39290134495293","specUrl":"https://www.methodracewheels.com/products/703-matte-black?variant=39290134495293","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/703-matte-black?variant=39290134495293"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","fitmentPending":true,"variant":"Matte Black / 17×8.5 / +35 mm","finish":"Matte Black","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":39290134495293,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 27.93 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Matte Black","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"method703-jl","productIds":["wh-method703"],"author":"LSJKU","date":"2025-10-06","source":"https://www.jlwranglerforums.com/forum/threads/bead-grip-vs-beadlock-wheels.157649/","sourceName":"Owner forum report","kind":"owner","scope":"703 family only; not LC250 +35 mm SKU","context":"Jeep Wrangler; wheel dimensions/finish unconfirmed","summary":"Reports good on- and off-road experience with 703 wheels.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null},{"id":"wh-method703-gloss-titanium","brand":"METHOD","name":"703 · Gloss Titanium","sku":"MR70378560835","image":"method-mr70378560835","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":27.84,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-703-matte-black-17x8-5-plus-35?variant=wh-method703-gloss-titanium","source":"https://www.methodracewheels.com/products/703-gloss-titanium?variant=67746372845937","manufacturerUrl":"https://www.methodracewheels.com/products/703-gloss-titanium?variant=67746372845937","specUrl":"https://www.methodracewheels.com/products/703-gloss-titanium?variant=67746372845937","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/703-gloss-titanium?variant=67746372845937"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","fitmentPending":true,"variant":"Gloss Titanium / 17×8.5 / +35 mm","finish":"Gloss Titanium","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746372845937,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 27.84 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Gloss Titanium","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method703-machined-clear-coat","brand":"METHOD","name":"703 · Machined - Clear Coat","sku":"MR70378560335","image":"method-mr70378560335","unit":429,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":27.8,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-703-matte-black-17x8-5-plus-35?variant=wh-method703-machined-clear-coat","source":"https://www.methodracewheels.com/products/703-machined-clear-coat?variant=52030447616369","manufacturerUrl":"https://www.methodracewheels.com/products/703-machined-clear-coat?variant=52030447616369","specUrl":"https://www.methodracewheels.com/products/703-machined-clear-coat?variant=52030447616369","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":429,"url":"https://www.methodracewheels.com/products/703-machined-clear-coat?variant=52030447616369"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","fitmentPending":true,"variant":"Machined - Clear Coat / 17×8.5 / +35 mm","finish":"Machined - Clear Coat","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52030447616369,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 27.8 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2145,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Machined - Clear Coat","choice":null,"priceAmount":429,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method703-method-bronze","brand":"METHOD","name":"703 · Method Bronze®","sku":"MR70378560935","image":"method-mr70378560935","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":27.93,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-703-matte-black-17x8-5-plus-35?variant=wh-method703-method-bronze","source":"https://www.methodracewheels.com/products/703-method-bronze?variant=67746344993137","manufacturerUrl":"https://www.methodracewheels.com/products/703-method-bronze?variant=67746344993137","specUrl":"https://www.methodracewheels.com/products/703-method-bronze?variant=67746344993137","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/703-method-bronze?variant=67746344993137"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","fitmentPending":true,"variant":"Method Bronze® / 17×8.5 / +35 mm","finish":"Method Bronze®","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746344993137,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 27.93 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Method Bronze®","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. Method documents 703 17x8.5 +35 on a modified 2024 LC250; its lift/tire configuration is an example, not stock clearance certification.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-iconpro","slug":"icon-vehicle-dynamics-rebound-pro-bronze-17x8-5-plus-25","path":"/products/icon-vehicle-dynamics-rebound-pro-bronze-17x8-5-plus-25","name":"Rebound PRO · Bronze · 17 × 8.5 · +25 mm","brand":"ICON Vehicle Dynamics","brandPath":"/brands/icon-vehicle-dynamics","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-iconpro","brand":"ICON","name":"Rebound PRO · Bronze","sku":"21817859057BR","image":"icon","unit":356.38,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":95.1,"capacity":3200,"mass":null,"url":"/products/icon-vehicle-dynamics-rebound-pro-bronze-17x8-5-plus-25","seller":"ICON Vehicle Dynamics","note":"InnerLock retention pins. Packaged weight is not bare-wheel weight; installation needs the specified hardware procedure.","offers":[{"seller":"ICON Vehicle Dynamics","price":356.38,"url":"https://iconvehicledynamics.com/products/21817859057br"}],"cat":"wheels","realRolling":true,"price":1781.9,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","explain":"InnerLock retention pins. Packaged weight is not bare-wheel weight; installation needs the specified hardware procedure.","label":"17 × 8.5 · +25 mm · 6 × 139.7","choice":null,"priceAmount":356.38,"priceBasis":"each wheel","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"InnerLock retention pins. Packaged weight is not bare-wheel weight; installation needs the specified hardware procedure.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"icon-innerlock","productIds":["wh-iconpro"],"type":"manual","title":"Rebound PRO InnerLock tire mounting instructions","url":"https://prod-da.s3.us-east-2.amazonaws.com/FDGX/88ff24062c4aff98c01a72902405114d.pdf","publisher":"ICON Vehicle Dynamics","scope":"InnerLock wheel family · tire mounting","note":"Manufacturer instruction library links this PDF for 21817859057BR. Includes mounting steps on page 2. LC250 wheel torque and clearance checks are separate.","match":"family","official":true,"source":"https://iconvehicledynamics.com/pages/instruction-manuals-downloads","purpose":"installation","checked":"2026-10-25"}],"videos":[{"official":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=uciCAdLzYrs","title":"Mount a tire on Rebound PRO with InnerLock","creator":"ICON Vehicle Dynamics","scope":"Manufacturer · product family","note":"Specific InnerLock mounting procedure. Wheel size, torque values and vehicle fitment must follow the current instructions for your exact SKU."},{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"icon-pro-mount","productIds":["wh-iconpro"],"author":"Forum member, post #4","date":"2025-10-05","source":"https://www.jlwranglerforums.com/forum/threads/bead-grip-vs-beadlock-wheels.157649/","sourceName":"Owner forum report","kind":"owner","scope":"Rebound PRO family only; not LC250-specific","context":"Jeep Wrangler context; dimensions/finish unconfirmed","summary":"Reports satisfaction with tire retention but finds InnerLock hardware adds substantial tire-mounting work.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"wh-rr7","slug":"rrw-rr7-s-matte-black-17x8-5-plus-25","path":"/products/rrw-rr7-s-matte-black-17x8-5-plus-25","name":"RR7-S · Matte Black · 17 × 8.5 · +25 mm","brand":"RRW","brandPath":"/brands/rrw","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-rr7","brand":"RRW","name":"RR7-S · Matte Black","sku":"FF-RR7-S-1785-X25139-BK / 20-119","image":"rrw","unit":325,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":95.1,"capacity":2500,"mass":21.8,"url":"/products/rrw-rr7-s-matte-black-17x8-5-plus-25","seller":"Relations Race Wheels","note":"Flow formed. Manufacturer calls for extended-thread conical-seat lug nuts; budget them separately. Weight approximately 21.8 lb.","offers":[{"seller":"Relations Race Wheels","price":325,"url":"https://www.relationsracewheels.com/products/rr7-s-flow-formed-wheel-matte-black?variant=42254371913810"}],"cat":"wheels","realRolling":true,"price":1625,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","explain":"Flow formed. Manufacturer calls for extended-thread conical-seat lug nuts; budget them separately. Weight approximately 21.8 lb.","label":"17 × 8.5 · +25 mm · 6 × 139.7","choice":null,"priceAmount":325,"priceBasis":"each wheel","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Flow formed. Manufacturer calls for extended-thread conical-seat lug nuts; budget them separately. Weight approximately 21.8 lb.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"ti-at3-33","slug":"toyo-open-country-a-t-iii-lt285-70r17-e","path":"/products/toyo-open-country-a-t-iii-lt285-70r17-e","name":"Open Country A/T III · LT285/70R17 E","brand":"TOYO","brandPath":"/brands/toyo","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-at3-33","brand":"TOYO","name":"Open Country A/T III","sku":"87SR7OCAT3OWL","image":"at3","unit":358.68,"slot":"tires","diameter":17,"widthmm":285,"aspect":70,"size":"LT285/70R17","load":"E","service":"121/118S","capacity":3195,"mass":54,"actual":33,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Outlined white letter","url":"/products/toyo-open-country-a-t-iii-lt285-70r17-e","seller":"Tire Rack","note":"The smaller diameter in this collection. Start here for a restrained daily / trail build; clearance still requires inspection.","offers":[{"seller":"Tire Rack","price":358.68,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=87SR7OCAT3OWL&tireMake=Toyo&tireModel=Open+Country+A%2FT+III"}],"cat":"wheels","realRolling":true,"price":1793.4,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · LT285/70R17 · E · 121/118S","explain":"The smaller diameter in this collection. Start here for a restrained daily / trail build; clearance still requires inspection.","label":"AT · LT285/70R17 · E · 121/118S","choice":null,"priceAmount":358.68,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"The smaller diameter in this collection. Start here for a restrained daily / trail build; clearance still requires inspection.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"toyo-safety","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e","ti-rt-34"],"type":"guide","title":"Toyo tire mounting and safety guidance","url":"https://www.toyotires.com/safety-info/","publisher":"Toyo Tires","scope":"General professional mounting and service guidance","note":"Manufacturer safety guidance, not a size-specific installation manual. Inflation, load, rim compatibility and LC250 clearance remain configuration dependent.","match":"general","official":true,"source":"https://www.toyotires.com/safety-info/","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at3-lc","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; do not infer exact size, load range or rubbing","context":"LC250; 35-inch Toyo A/T III; exact width/load range unconfirmed","summary":"Likes low road noise and on/off-road behavior.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-4runner","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"anythingaustin","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle and unconfirmed size","context":"4Runner; tire size and load range not stated","summary":"Reports years of highway/trail use and acceptable noise in a 4Runner.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-wet","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"jotegr","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; anecdotal traction comparison","context":"Vehicle, size and load range not stated","summary":"Likes trail grip but reports pavement traction breaking sooner than all-season tires during spirited driving.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-at3-34c","slug":"toyo-open-country-a-t-iii-lt285-75r17-c","path":"/products/toyo-open-country-a-t-iii-lt285-75r17-c","name":"Open Country A/T III · LT285/75R17 C","brand":"TOYO","brandPath":"/brands/toyo","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-at3-34c","brand":"TOYO","name":"Open Country A/T III","sku":"875QR7OCAT3","image":"at3","unit":359.38,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"C","service":"117/114Q","capacity":2835,"mass":59,"actual":33.9,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Blackwall","url":"/products/toyo-open-country-a-t-iii-lt285-75r17-c","seller":"Tire Rack","note":"C load range is a separate specification, not a quality score. Confirm load capacity against your vehicle label and loaded axle weights.","offers":[{"seller":"Tire Rack","price":359.38,"url":"https://www.tirerack.com/tires/toyo-open-country-a-t-iii?partnum=875QR7OCAT3"}],"cat":"wheels","realRolling":true,"price":1796.9,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · LT285/75R17 · C · 117/114Q","explain":"C load range is a separate specification, not a quality score. Confirm load capacity against your vehicle label and loaded axle weights.","label":"AT · LT285/75R17 · C · 117/114Q","choice":null,"priceAmount":359.38,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"C load range is a separate specification, not a quality score. Confirm load capacity against your vehicle label and loaded axle weights.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"toyo-safety","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e","ti-rt-34"],"type":"guide","title":"Toyo tire mounting and safety guidance","url":"https://www.toyotires.com/safety-info/","publisher":"Toyo Tires","scope":"General professional mounting and service guidance","note":"Manufacturer safety guidance, not a size-specific installation manual. Inflation, load, rim compatibility and LC250 clearance remain configuration dependent.","match":"general","official":true,"source":"https://www.toyotires.com/safety-info/","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at3-lc","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; do not infer exact size, load range or rubbing","context":"LC250; 35-inch Toyo A/T III; exact width/load range unconfirmed","summary":"Likes low road noise and on/off-road behavior.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-4runner","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"anythingaustin","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle and unconfirmed size","context":"4Runner; tire size and load range not stated","summary":"Reports years of highway/trail use and acceptable noise in a 4Runner.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-wet","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"jotegr","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; anecdotal traction comparison","context":"Vehicle, size and load range not stated","summary":"Likes trail grip but reports pavement traction breaking sooner than all-season tires during spirited driving.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-ko3-34","slug":"bfgoodrich-all-terrain-t-a-ko3-lt285-75r17-e","path":"/products/bfgoodrich-all-terrain-t-a-ko3-lt285-75r17-e","name":"All-Terrain T/A KO3 · LT285/75R17 E","brand":"BFGoodrich","brandPath":"/brands/bfgoodrich","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-ko3-34","brand":"BFGOODRICH","name":"All-Terrain T/A KO3","sku":"875SR7KO3RWL","image":"ko3","unit":384.99,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"E","service":"128/125S","capacity":3970,"mass":63,"actual":33.8,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Raised white letter","url":"/products/bfgoodrich-all-terrain-t-a-ko3-lt285-75r17-e","seller":"Tire Rack","note":"Higher rated capacity than the C-range Toyo shown here, plus 4 lb more per tire. Extra capacity does not increase the vehicle’s payload or axle limits.","offers":[{"seller":"Tire Rack","price":384.99,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=875SR7KO3RWL&tireMake=BFGoodrich&tireModel=All-Terrain+T%2FA+KO3"}],"cat":"wheels","realRolling":true,"price":1924.95,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · LT285/75R17 · E · 128/125S","explain":"Higher rated capacity than the C-range Toyo shown here, plus 4 lb more per tire. Extra capacity does not increase the vehicle’s payload or axle limits.","label":"AT · LT285/75R17 · E · 128/125S","choice":null,"priceAmount":384.99,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Higher rated capacity than the C-range Toyo shown here, plus 4 lb more per tire. Extra capacity does not increase the vehicle’s payload or axle limits.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"bfg-ko3-guide","productIds":["ti-ko3-34","ti-ko3-35d"],"type":"guide","title":"KO3 mounting, balancing and bead-seating guidance","url":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","publisher":"BFGoodrich","scope":"KO3 family · all sizes require their own checks","note":"Manufacturer guidance for qualified tire technicians. Does not establish LC250 clearance or wheel fitment for either catalog size.","match":"family","official":true,"source":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","purpose":"installation","checked":"2026-10-25"}],"videos":[{"id":"bfg-mount","productIds":["ti-ko3-34","ti-ko3-35d"],"type":"video","title":"BFGoodrich guide to mounting performance tires","url":"https://www.youtube.com/watch?v=YPZcVeJQaOc","publisher":"BFGoodrich","scope":"Official · professional mounting procedure","note":"Linked by the manufacturer KO3 mounting article. General mounting technique, not an LC250 or exact size fitment demonstration.","match":"general","official":true,"source":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","purpose":"installation","checked":"2026-10-25","creator":"BFGoodrich"},{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"ko3-ranger","productIds":["ti-ko3-34","ti-ko3-35d"],"author":"awd.nv","date":"2024-11-06","source":"https://www.ranger5g.com/forum/threads/anyone-tried-toyos-rt-trail-275-70-17.31736/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle/size/load configuration","context":"2021 Ranger Tremor; 285/70R17 KO3","summary":"Finds KO3 road noise low and puddle behavior better than the previous KO2 set.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-rt-34","slug":"toyo-open-country-r-t-trail-lt285-75r17-e","path":"/products/toyo-open-country-r-t-trail-lt285-75r17-e","name":"Open Country R/T Trail · LT285/75R17 E","brand":"TOYO","brandPath":"/brands/toyo","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-rt-34","brand":"TOYO","name":"Open Country R/T Trail","sku":"875QR7OCRTT","image":"rt","unit":398.32,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"E","service":"128/125Q","capacity":3970,"mass":60,"actual":33.9,"rim":[7.5,9.5],"snow":false,"terrain":"Rugged-terrain","sidewall":"Blackwall","url":"/products/toyo-open-country-r-t-trail-lt285-75r17-e","seller":"Tire Rack","note":"A more aggressive tread option. No 3PMSF severe-snow certification in this listing; choose a snow-rated alternative if that is a priority.","offers":[{"seller":"Tire Rack","price":398.32,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=875QR7OCRTT&tireMake=Toyo&tireModel=Open+Country+R%2FT+Trail"}],"cat":"wheels","realRolling":true,"price":1991.6,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"RT · LT285/75R17 · E · 128/125Q","explain":"A more aggressive tread option. No 3PMSF severe-snow certification in this listing; choose a snow-rated alternative if that is a priority.","label":"RT · LT285/75R17 · E · 128/125Q","choice":null,"priceAmount":398.32,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"A more aggressive tread option. No 3PMSF severe-snow certification in this listing; choose a snow-rated alternative if that is a priority.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"toyo-safety","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e","ti-rt-34"],"type":"guide","title":"Toyo tire mounting and safety guidance","url":"https://www.toyotires.com/safety-info/","publisher":"Toyo Tires","scope":"General professional mounting and service guidance","note":"Manufacturer safety guidance, not a size-specific installation manual. Inflation, load, rim compatibility and LC250 clearance remain configuration dependent.","match":"general","official":true,"source":"https://www.toyotires.com/safety-info/","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"rttrail-tremor","productIds":["ti-rt-34"],"author":"Mister Bevilaqua","date":"2024-11-28","source":"https://www.fordtremor.com/threads/toyo-mt-or-mickey-thompson-baja-boss.19749/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; not an LC250 or exact-SKU review","context":"Ford truck; exact R/T Trail size/load range not stated","summary":"Reports satisfaction with R/T Trail performance, appearance and wear.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"wh-scs-f5","slug":"scs-f5-matte-jet-black-17x8-5-plus-20","path":"/products/scs-f5-matte-jet-black-17x8-5-plus-20","name":"F5 · Matte Jet Black · 17 × 8.5 · +20 mm","brand":"SCS","brandPath":"/brands/scs","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-scs-f5","brand":"SCS","name":"F5 · Matte Jet Black","sku":"F5D3BKSCS360B17X8.5+20","image":"f5","unit":285,"slot":"wheel","diameter":17,"width":8.5,"offset":20,"bore":95.1,"capacity":null,"mass":21.5,"url":"/products/scs-f5-matte-jet-black-17x8-5-plus-20","seller":"Stealth Custom Series","note":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","fitmentPending":true,"offers":[{"seller":"Stealth Custom Series","price":285,"url":"https://www.stealthcustomseries.com/products/f5?variant=44078925676597"}],"cat":"wheels","realRolling":true,"price":1425,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +20 mm · 6 × 139.7","explain":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","label":"17 × 8.5 · +20 mm · 6 × 139.7","choice":null,"priceAmount":285,"priceBasis":"each wheel","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-scs-gen5","slug":"scs-gen5-matte-jet-black-17x8-5-plus-20","path":"/products/scs-gen5-matte-jet-black-17x8-5-plus-20","name":"GEN5 · Matte Jet Black · 17 × 8.5 · +20 mm","brand":"SCS","brandPath":"/brands/scs","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-scs-gen5","brand":"SCS","name":"GEN5 · Matte Jet Black","sku":"GEN5D3BKSCS17X8.5+20","image":"gen5","unit":285,"slot":"wheel","diameter":17,"width":8.5,"offset":20,"bore":95.1,"capacity":null,"mass":22,"url":"/products/scs-gen5-matte-jet-black-17x8-5-plus-20","seller":"Stealth Custom Series","note":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","fitmentPending":true,"offers":[{"seller":"Stealth Custom Series","price":285,"url":"https://www.stealthcustomseries.com/products/gen5?variant=44078935310389"}],"cat":"wheels","realRolling":true,"price":1425,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +20 mm · 6 × 139.7","explain":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","label":"17 × 8.5 · +20 mm · 6 × 139.7","choice":null,"priceAmount":285,"priceBasis":"each wheel","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Lightweight, capless flow-formed wheel. Manufacturer lists this variant for 2024+ Tacoma; LC250 brake clearance, exact wheel load rating and mounting approval still need confirmation. Family load-rating ranges are not assigned to this variant.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-nomad501","slug":"nomad-501-convoy-satin-black-17x8-5-plus-25","path":"/products/nomad-501-convoy-satin-black-17x8-5-plus-25","name":"501 Convoy · Satin Black · 17 × 8.5 · +25 mm","brand":"NOMAD","brandPath":"/brands/nomad","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"wh-nomad501","brand":"NOMAD","name":"501 Convoy · Satin Black","sku":"N501SB-78560+25","image":"nomad","unit":325.44,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.1,"capacity":2500,"mass":null,"url":"/products/nomad-501-convoy-satin-black-17x8-5-plus-25","seller":"Element Wheels","offers":[{"seller":"Element Wheels","price":325.44,"url":"https://www.elementwheels.com/17x8-5-nomad-off-road-501-convoy-satin-black-6x5-5-139-7-25mm-n501sb-78560-25"},{"seller":"Nomad Wheels","price":339,"url":"https://www.nomadwheels.com/products/501-convoy-satin-black?variant=43555325837493"}],"specUrl":"https://www.elementwheels.com/17x8-5-nomad-off-road-501-convoy-satin-black-6x5-5-139-7-25mm-n501sb-78560-25","manufacturerUrl":"https://www.nomadwheels.com/products/501-convoy-satin-black?variant=43555325837493","note":"Classic modular design with Formlite construction. This 106.1 mm bore is larger than the LC250 hub; confirm the supplier-approved centering arrangement, cap clearance and 60-degree conical spline-drive lugs. Supporting hardware is extra.","fitmentPending":true,"cat":"wheels","realRolling":true,"price":1627.2,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","explain":"Classic modular design with Formlite construction. This 106.1 mm bore is larger than the LC250 hub; confirm the supplier-approved centering arrangement, cap clearance and 60-degree conical spline-drive lugs. Supporting hardware is extra.","label":"17 × 8.5 · +25 mm · 6 × 139.7","choice":null,"priceAmount":325.44,"priceBasis":"each wheel","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Classic modular design with Formlite construction. This 106.1 mm bore is larger than the LC250 hub; confirm the supplier-approved centering arrangement, cap clearance and 60-degree conical spline-drive lugs. Supporting hardware is extra.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"ti-falken-34e","slug":"falken-wildpeak-a-t4w-lt285-75r17-e","path":"/products/falken-wildpeak-a-t4w-lt285-75r17-e","name":"Wildpeak A/T4W · LT285/75R17 E","brand":"FALKEN","brandPath":"/brands/falken","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-falken-34e","brand":"FALKEN","name":"Wildpeak A/T4W","image":"falken","unit":358,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"E","service":"128/125S","capacity":3970,"mass":67,"actual":34.1,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Raised black letter","sku":"875SR7WPAT4W","url":"/products/falken-wildpeak-a-t4w-lt285-75r17-e","seller":"Tire Rack","note":"HD / DURASPEC 3-ply version. Listed 34.1-inch diameter and 67 lb mass are greater than the smaller Toyo A/T III option. Snow certification does not establish ice performance.","manufacturerUrl":"https://www.falkentire.com/wildpeak/at4w","offers":[{"seller":"Tire Rack","price":358,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=875SR7WPAT4W&tireMake=Falken&tireModel=WildPeak+A%2FT4W"}],"cat":"wheels","realRolling":true,"price":1790,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · LT285/75R17 · E · 128/125S","explain":"HD / DURASPEC 3-ply version. Listed 34.1-inch diameter and 67 lb mass are greater than the smaller Toyo A/T III option. Snow certification does not establish ice performance.","label":"AT · LT285/75R17 · E · 128/125S","choice":null,"priceAmount":358,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"HD / DURASPEC 3-ply version. Listed 34.1-inch diameter and 67 lb mass are greater than the smaller Toyo A/T III option. Snow certification does not establish ice performance.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"falken-care","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"type":"reference","title":"Falken tire care, safety and warranty resource","url":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","publisher":"Falken Tires","scope":"General owner reference","note":"Tire care and safety context; no exact AT4W mounting instruction set was verified. Not counted as installation instructions.","match":"general","official":true,"source":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at4w-sierra","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Original poster","date":null,"source":"https://www.reddit.com/r/gmcsierra/comments/1ca9o8v/new_falken_wildpeak_at4w/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; not catalog 17-inch variants","context":"GMC Sierra AT4 diesel; 285/75R18 at reported 41 psi","summary":"Reports lower economy and a floating road feel after switching from Ridge Grapplers; preferred the previous tires.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at4w-wet","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Auandthuja","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Family reference; precise tire revision/configuration unconfirmed","context":"Owner states Wildpeak AT4; vehicle/size not stated","summary":"Favors the Wildpeaks for wet grip and durability compared with friends’ alternatives.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-falken-34c","slug":"falken-wildpeak-a-t4w-lt285-75r17-c","path":"/products/falken-wildpeak-a-t4w-lt285-75r17-c","name":"Wildpeak A/T4W · LT285/75R17 C","brand":"FALKEN","brandPath":"/brands/falken","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-falken-34c","brand":"FALKEN","name":"Wildpeak A/T4W","image":"falken","unit":380,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"C","service":"117/114R","capacity":2835,"mass":67,"actual":34.1,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Raised black letter · Alt 2","sku":"875R7WPAT4W","url":"/products/falken-wildpeak-a-t4w-lt285-75r17-c","seller":"Tire Rack","note":"DURASPEC 3-ply C-range version. Same rounded retailer-listed weight as the E option, but lower rated load capacity. C does not automatically mean a lighter tire.","manufacturerUrl":"https://www.falkentire.com/wildpeak/at4w","offers":[{"seller":"Tire Rack","price":380,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=875R7WPAT4W&tireMake=Falken&tireModel=WildPeak+A%2FT4W"}],"cat":"wheels","realRolling":true,"price":1900,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · LT285/75R17 · C · 117/114R","explain":"DURASPEC 3-ply C-range version. Same rounded retailer-listed weight as the E option, but lower rated load capacity. C does not automatically mean a lighter tire.","label":"AT · LT285/75R17 · C · 117/114R","choice":null,"priceAmount":380,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"DURASPEC 3-ply C-range version. Same rounded retailer-listed weight as the E option, but lower rated load capacity. C does not automatically mean a lighter tire.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"falken-care","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"type":"reference","title":"Falken tire care, safety and warranty resource","url":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","publisher":"Falken Tires","scope":"General owner reference","note":"Tire care and safety context; no exact AT4W mounting instruction set was verified. Not counted as installation instructions.","match":"general","official":true,"source":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at4w-sierra","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Original poster","date":null,"source":"https://www.reddit.com/r/gmcsierra/comments/1ca9o8v/new_falken_wildpeak_at4w/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; not catalog 17-inch variants","context":"GMC Sierra AT4 diesel; 285/75R18 at reported 41 psi","summary":"Reports lower economy and a floating road feel after switching from Ridge Grapplers; preferred the previous tires.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at4w-wet","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Auandthuja","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Family reference; precise tire revision/configuration unconfirmed","context":"Owner states Wildpeak AT4; vehicle/size not stated","summary":"Favors the Wildpeaks for wet grip and durability compared with friends’ alternatives.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-nitto-ridge-34e","slug":"nitto-ridge-grappler-lt285-75r17-e","path":"/products/nitto-ridge-grappler-lt285-75r17-e","name":"Ridge Grappler · LT285/75R17 E","brand":"NITTO","brandPath":"/brands/nitto","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-nitto-ridge-34e","brand":"NITTO","name":"Ridge Grappler","image":"nitto","unit":378,"slot":"tires","diameter":17,"widthmm":285,"aspect":75,"size":"LT285/75R17","load":"E","service":"121/118Q","capacity":3195,"mass":64.4,"actual":33.86,"rim":[7.5,9.5],"snow":false,"terrain":"Rugged-terrain","sidewall":"Blackwall · aggressive block","sku":"217200","url":"/products/nitto-ridge-grappler-lt285-75r17-e","seller":"Tire Rack","note":"Hybrid tread option without 3PMSF certification. Nitto lists 64.40 lb for stock #217200; the retailer lists 61 lb, so manufacturer weight is used here. Confirm the delivered specification.","manufacturerUrl":"https://www.nittotire.com/light-truck-tires/ridge-grappler-light-truck-tire/","offers":[{"seller":"Tire Rack","price":378,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=875QR7RIGV2&tireMake=Nitto&tireModel=Ridge+Grappler"}],"cat":"wheels","realRolling":true,"price":1890,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"RT · LT285/75R17 · E · 121/118Q","explain":"Hybrid tread option without 3PMSF certification. Nitto lists 64.40 lb for stock #217200; the retailer lists 61 lb, so manufacturer weight is used here. Confirm the delivered specification.","label":"RT · LT285/75R17 · E · 121/118Q","choice":null,"priceAmount":378,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Hybrid tread option without 3PMSF certification. Nitto lists 64.40 lb for stock #217200; the retailer lists 61 lb, so manufacturer weight is used here. Confirm the delivered specification.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"nitto-safety","productIds":["ti-nitto-ridge-34e","ti-nitto-35n"],"type":"reference","title":"Nitto tire safety and maintenance manual","url":"https://www.nittotire.com/media/oouhs1rq/nitto-warranty-manual_2017.pdf","publisher":"Nitto","scope":"General owner safety reference · dated 2017","note":"The document explicitly says it does not provide mounting/service training. Retained as safety context, not counted as an installation guide.","match":"general","official":true,"source":"https://www.nittotire.com/media/oouhs1rq/nitto-warranty-manual_2017.pdf","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"ridge-sierra","productIds":["ti-nitto-ridge-34e","ti-nitto-35n"],"author":"Original poster","date":null,"source":"https://www.reddit.com/r/gmcsierra/comments/1ca9o8v/new_falken_wildpeak_at4w/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle and unknown SKU","context":"GMC Sierra AT4 diesel; previous tire exact size unconfirmed","summary":"Reports preferring the earlier Ridge Grapplers for road feel and economy over a short AT4W trial.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-mickey-33sl","slug":"mickey-thompson-baja-boss-a-t-285-70r17-sl","path":"/products/mickey-thompson-baja-boss-a-t-285-70r17-sl","name":"Baja Boss A/T · 285/70R17 SL","brand":"MICKEY THOMPSON","brandPath":"/brands/mickey-thompson","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-mickey-33sl","brand":"MICKEY THOMPSON","name":"Baja Boss A/T","image":"mickey","unit":307.89,"slot":"tires","diameter":17,"widthmm":285,"aspect":70,"size":"285/70R17","load":"SL","service":"116T","capacity":2756,"mass":48,"actual":32.8,"rim":[7.5,9.5],"snow":true,"terrain":"All-terrain","sidewall":"Blackwall","sku":"87TR7BBAT","url":"/products/mickey-thompson-baja-boss-a-t-285-70r17-sl","seller":"Tire Rack","note":"Standard-load, non-LT version: 48 lb listed mass and different carcass construction from LT Baja Boss variants. Confirm load / inflation suitability with your installer; this is not the LT285/70R17 E tire.","manufacturerUrl":"https://www.mickeythompsontires.com/light-truck-tires/baja-boss-a-t","offers":[{"seller":"Tire Rack","price":307.89,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=87TR7BBAT&tireMake=Mickey+Thompson&tireModel=Baja+Boss+A%2FT"}],"cat":"wheels","realRolling":true,"price":1539.4499999999998,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · 285/70R17 · SL · 116T","explain":"Standard-load, non-LT version: 48 lb listed mass and different carcass construction from LT Baja Boss variants. Confirm load / inflation suitability with your installer; this is not the LT285/70R17 E tire.","label":"AT · 285/70R17 · SL · 116T","choice":null,"priceAmount":307.89,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard-load, non-LT version: 48 lb listed mass and different carcass construction from LT Baja Boss variants. Confirm load / inflation suitability with your installer; this is not the LT285/70R17 E tire.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"mickey-mount","productIds":["ti-mickey-33sl"],"type":"guide","title":"Tire-wheel match mounting for optimum uniformity","url":"https://www.mickeythompsontires.com/tech-bulletins/tire-wheel-match-mounting-for-optimum-uniformity","publisher":"Mickey Thompson","scope":"General tire-wheel match mounting","note":"Professional mounting/balancing reference, not a Baja Boss size-specific or LC250 fitment guide.","match":"general","official":true,"source":"https://www.mickeythompsontires.com/tech-bulletins/tire-wheel-match-mounting-for-optimum-uniformity","purpose":"installation","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"bajaboss-tremor","productIds":["ti-mickey-33sl"],"author":"BroncOh","date":"2024-11-28","source":"https://www.fordtremor.com/threads/toyo-mt-or-mickey-thompson-baja-boss.19749/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; not the catalog SL variant","context":"Ford Tremor context; exact tire size/load range unconfirmed","summary":"Reports nearly 20,000 miles of satisfactory Baja Boss A/T use without tread issues.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Modification requirements are unconfirmed for this exact combination. Check full lock and suspension compression."}}]},{"id":"ti-falken-35n","slug":"falken-wildpeak-a-t4w-35x11-5r17lt-c","path":"/products/falken-wildpeak-a-t4w-35x11-5r17lt-c","name":"Wildpeak A/T4W · 35X11.5R17LT C","brand":"FALKEN","brandPath":"/brands/falken","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-falken-35n","brand":"FALKEN","name":"Wildpeak A/T4W","image":"falken","unit":319,"slot":"tires","diameter":17,"nominalDiameter":35,"sectionInches":11.5,"size":"35X11.5R17LT","load":"C","service":"118R","capacity":2910,"mass":68,"actual":35,"rim":[7.5,10],"sku":"515R7WPAT4W","url":"/products/falken-wildpeak-a-t4w-35x11-5r17lt-c","seller":"Tire Rack","snow":true,"terrain":"All-terrain","sidewall":"Raised black letter · Alt 2","note":"35-inch narrow option: listed section width 11.9 inches on the measuring rim. DURASPEC 3-ply, C range and 3PMSF. Narrower than a 12.5-inch option; LC250 clearance and spare mounting still need verification.","offers":[{"seller":"Tire Rack","price":319,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=515R7WPAT4W&tireMake=Falken&tireModel=WildPeak+A%2FT4W"}],"cat":"wheels","realRolling":true,"price":1595,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · 35X11.5R17LT · C · 118R","explain":"35-inch narrow option: listed section width 11.9 inches on the measuring rim. DURASPEC 3-ply, C range and 3PMSF. Narrower than a 12.5-inch option; LC250 clearance and spare mounting still need verification.","label":"AT · 35X11.5R17LT · C · 118R","choice":null,"priceAmount":319,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"35-inch narrow option: listed section width 11.9 inches on the measuring rim. DURASPEC 3-ply, C range and 3PMSF. Narrower than a 12.5-inch option; LC250 clearance and spare mounting still need verification.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"falken-care","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"type":"reference","title":"Falken tire care, safety and warranty resource","url":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","publisher":"Falken Tires","scope":"General owner reference","note":"Tire care and safety context; no exact AT4W mounting instruction set was verified. Not counted as installation instructions.","match":"general","official":true,"source":"https://www.falkentire.com/contact-us/warranty?qt-tire_care_safety=3","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at4w-sierra","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Original poster","date":null,"source":"https://www.reddit.com/r/gmcsierra/comments/1ca9o8v/new_falken_wildpeak_at4w/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; not catalog 17-inch variants","context":"GMC Sierra AT4 diesel; 285/75R18 at reported 41 psi","summary":"Reports lower economy and a floating road feel after switching from Ridge Grapplers; preferred the previous tires.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at4w-wet","productIds":["ti-falken-34e","ti-falken-34c","ti-falken-35n"],"author":"Auandthuja","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Family reference; precise tire revision/configuration unconfirmed","context":"Owner states Wildpeak AT4; vehicle/size not stated","summary":"Favors the Wildpeaks for wet grip and durability compared with friends’ alternatives.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Plan a clearance review. Trimming / liner changes may be needed; lift alone is not proof of clearance."}}]},{"id":"ti-at3-35e","slug":"toyo-open-country-a-t-iii-35x12-5r17lt-e","path":"/products/toyo-open-country-a-t-iii-35x12-5r17lt-e","name":"Open Country A/T III · 35X12.5R17LT E","brand":"TOYO","brandPath":"/brands/toyo","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-at3-35e","brand":"TOYO","name":"Open Country A/T III","image":"at3","unit":421.59,"slot":"tires","diameter":17,"nominalDiameter":35,"sectionInches":12.5,"size":"35X12.5R17LT","load":"E","service":"121R","capacity":3195,"mass":65,"actual":34.5,"rim":[8,10.5],"sku":"525R7OCAT3","url":"/products/toyo-open-country-a-t-iii-35x12-5r17lt-e","seller":"Tire Rack","snow":true,"terrain":"All-terrain","sidewall":"Blackwall","note":"35-inch designation, 34.5-inch listed diameter. This is the E / 121R version, not the lower-capacity C / 111Q variant. The wider footprint needs an exact-offset clearance review.","offers":[{"seller":"Tire Rack","price":421.59,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=525R7OCAT3&tireMake=Toyo&tireModel=Open+Country+A%2FT+III"}],"cat":"wheels","realRolling":true,"price":2107.95,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · 35X12.5R17LT · E · 121R","explain":"35-inch designation, 34.5-inch listed diameter. This is the E / 121R version, not the lower-capacity C / 111Q variant. The wider footprint needs an exact-offset clearance review.","label":"AT · 35X12.5R17LT · E · 121R","choice":null,"priceAmount":421.59,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"35-inch designation, 34.5-inch listed diameter. This is the E / 121R version, not the lower-capacity C / 111Q variant. The wider footprint needs an exact-offset clearance review.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"toyo-safety","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e","ti-rt-34"],"type":"guide","title":"Toyo tire mounting and safety guidance","url":"https://www.toyotires.com/safety-info/","publisher":"Toyo Tires","scope":"General professional mounting and service guidance","note":"Manufacturer safety guidance, not a size-specific installation manual. Inflation, load, rim compatibility and LC250 clearance remain configuration dependent.","match":"general","official":true,"source":"https://www.toyotires.com/safety-info/","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"at3-lc","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"Noveria_Corp","date":null,"source":"https://www.reddit.com/r/LandCruisers/comments/1oa5gwr/lc_250_upgraded/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; do not infer exact size, load range or rubbing","context":"LC250; 35-inch Toyo A/T III; exact width/load range unconfirmed","summary":"Likes low road noise and on/off-road behavior.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-4runner","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"anythingaustin","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle and unconfirmed size","context":"4Runner; tire size and load range not stated","summary":"Reports years of highway/trail use and acceptable noise in a 4Runner.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"},{"id":"at3-wet","productIds":["ti-at3-33","ti-at3-34c","ti-at3-35e"],"author":"jotegr","date":null,"source":"https://www.reddit.com/r/overlanding/comments/1k0o1cb/anyone_running_the_toyo_open_countrys_are_they/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; anecdotal traction comparison","context":"Vehicle, size and load range not stated","summary":"Likes trail grip but reports pavement traction breaking sooner than all-season tires during spirited driving.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"documented","label":"Changes in published setup","detail":"Bracket / liner changes are listed in the Westcott reference. Your exact suspension and tire still need approval."}}]},{"id":"ti-ko3-35d","slug":"bfgoodrich-all-terrain-t-a-ko3-35x12-5r17lt-d","path":"/products/bfgoodrich-all-terrain-t-a-ko3-35x12-5r17lt-d","name":"All-Terrain T/A KO3 · 35X12.5R17LT D","brand":"BFGoodrich","brandPath":"/brands/bfgoodrich","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-ko3-35d","brand":"BFGOODRICH","name":"All-Terrain T/A KO3","image":"ko3","unit":418.99,"slot":"tires","diameter":17,"nominalDiameter":35,"sectionInches":12.5,"size":"35X12.5R17LT","load":"D","service":"119R","capacity":3000,"mass":63,"actual":34.5,"rim":[8,11],"sku":"525R7KO3RWL","url":"/products/bfgoodrich-all-terrain-t-a-ko3-35x12-5r17lt-d","seller":"Tire Rack","snow":true,"terrain":"All-terrain","sidewall":"Raised White Letter","note":"35-inch designation with 34.5-inch listed diameter. D load range / 119R and raised white lettering distinguish this exact variant. Check body and control-arm clearance before ordering.","offers":[{"seller":"Tire Rack","price":418.99,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=525R7KO3RWL&tireMake=BFGoodrich&tireModel=All-Terrain+T%2FA+KO3"}],"cat":"wheels","realRolling":true,"price":2094.95,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"AT · 35X12.5R17LT · D · 119R","explain":"35-inch designation with 34.5-inch listed diameter. D load range / 119R and raised white lettering distinguish this exact variant. Check body and control-arm clearance before ordering.","label":"AT · 35X12.5R17LT · D · 119R","choice":null,"priceAmount":418.99,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"35-inch designation with 34.5-inch listed diameter. D load range / 119R and raised white lettering distinguish this exact variant. Check body and control-arm clearance before ordering.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"bfg-ko3-guide","productIds":["ti-ko3-34","ti-ko3-35d"],"type":"guide","title":"KO3 mounting, balancing and bead-seating guidance","url":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","publisher":"BFGoodrich","scope":"KO3 family · all sizes require their own checks","note":"Manufacturer guidance for qualified tire technicians. Does not establish LC250 clearance or wheel fitment for either catalog size.","match":"family","official":true,"source":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","purpose":"installation","checked":"2026-10-25"}],"videos":[{"id":"bfg-mount","productIds":["ti-ko3-34","ti-ko3-35d"],"type":"video","title":"BFGoodrich guide to mounting performance tires","url":"https://www.youtube.com/watch?v=YPZcVeJQaOc","publisher":"BFGoodrich","scope":"Official · professional mounting procedure","note":"Linked by the manufacturer KO3 mounting article. General mounting technique, not an LC250 or exact size fitment demonstration.","match":"general","official":true,"source":"https://www.bfgoodrich.ca/en/auto/garage/articles/bfgoodrich-all-terrain-t-a-ko3-tire-vibration-mounting-balancing-and-bead-seating","purpose":"installation","checked":"2026-10-25","creator":"BFGoodrich"},{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"ko3-ranger","productIds":["ti-ko3-34","ti-ko3-35d"],"author":"awd.nv","date":"2024-11-06","source":"https://www.ranger5g.com/forum/threads/anyone-tried-toyos-rt-trail-275-70-17.31736/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle/size/load configuration","context":"2021 Ranger Tremor; 285/70R17 KO3","summary":"Finds KO3 road noise low and puddle behavior better than the previous KO2 set.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"documented","label":"Changes in published setup","detail":"Bracket / liner changes are listed in the Westcott reference. Your exact suspension and tire still need approval."}}]},{"id":"ti-nitto-35n","slug":"nitto-ridge-grappler-35x11-5r17lt-e","path":"/products/nitto-ridge-grappler-35x11-5r17lt-e","name":"Ridge Grappler · 35X11.5R17LT E","brand":"NITTO","brandPath":"/brands/nitto","category":"wheels","categorySlug":"wheels-and-tires","addedOn":null,"defaultIndex":0,"variants":[{"id":"ti-nitto-35n","brand":"NITTO","name":"Ridge Grappler","image":"nitto","unit":433,"slot":"tires","diameter":17,"nominalDiameter":35,"sectionInches":11.5,"size":"35X11.5R17LT","load":"E","service":"128Q","capacity":3970,"mass":66,"actual":34.8,"rim":[7.5,10],"sku":"515QR7RIG","url":"/products/nitto-ridge-grappler-35x11-5r17lt-e","seller":"Tire Rack","snow":false,"terrain":"Rugged-terrain","sidewall":"Blackwall · aggressive block","note":"Narrow 35-inch hybrid-tread option. Listed diameter 34.8 inches and 66 lb retailer-listed mass. No 3PMSF snow certification. E load range does not eliminate LC250 clearance or spare requirements.","offers":[{"seller":"Tire Rack","price":433,"url":"https://www.tirerack.com/tires/tires.jsp?partnum=515QR7RIG&tireMake=Nitto&tireModel=Ridge+Grappler"}],"cat":"wheels","realRolling":true,"price":2165,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"tire","desc":"RT · 35X11.5R17LT · E · 128Q","explain":"Narrow 35-inch hybrid-tread option. Listed diameter 34.8 inches and 66 lb retailer-listed mass. No 3PMSF snow certification. E load range does not eliminate LC250 clearance or spare requirements.","label":"RT · 35X11.5R17LT · E · 128Q","choice":null,"priceAmount":433,"priceBasis":"each tire","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"LC250 comparison candidate. Verify the exact year, grade, dimensions, wheel/brake clearance and supplier approval before ordering.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Matching wheels","status":"check","detail":"Confirm existing wheels or choose matching 17″ wheels with a manufacturer-approved rim width, load rating and mounting arrangement.","page":"wheels"},{"label":"Clearance and supporting modifications","status":"check","detail":"Review the exact tire size, wheel width/offset, suspension and spare location. Trimming or other modifications are conditional on the specific setup.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Narrow 35-inch hybrid-tread option. Listed diameter 34.8 inches and 66 lb retailer-listed mass. No 3PMSF snow certification. E load range does not eliminate LC250 clearance or spare requirements.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"nitto-safety","productIds":["ti-nitto-ridge-34e","ti-nitto-35n"],"type":"reference","title":"Nitto tire safety and maintenance manual","url":"https://www.nittotire.com/media/oouhs1rq/nitto-warranty-manual_2017.pdf","publisher":"Nitto","scope":"General owner safety reference · dated 2017","note":"The document explicitly says it does not provide mounting/service training. Retained as safety context, not counted as an installation guide.","match":"general","official":true,"source":"https://www.nittotire.com/media/oouhs1rq/nitto-warranty-manual_2017.pdf","purpose":"service reference","checked":"2026-10-25"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[{"id":"ridge-sierra","productIds":["ti-nitto-ridge-34e","ti-nitto-35n"],"author":"Original poster","date":null,"source":"https://www.reddit.com/r/gmcsierra/comments/1ca9o8v/new_falken_wildpeak_at4w/","sourceName":"Owner forum report","kind":"owner","scope":"Tire family only; different vehicle and unknown SKU","context":"GMC Sierra AT4 diesel; previous tire exact size unconfirmed","summary":"Reports preferring the earlier Ridge Grapplers for road feel and economy over a short AT4W trial.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":{"code":"unknown","label":"No-rub fitment unverified","detail":"Plan a clearance review. Trimming / liner changes may be needed; lift alone is not proof of clearance."}}]},{"id":"wh-method305","slug":"method-305-nv-17-8-5-25","path":"/products/method-305-nv-17-8-5-25","name":"305 NV · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method305","brand":"METHOD","name":"305 NV · Matte Black","sku":"MR30578560525","image":"method-mr30578560525","unit":399,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":108,"capacity":2500,"mass":28.95,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-305-nv-17-8-5-25?variant=wh-method305","source":"https://www.methodracewheels.com/products/305-nv-matte-black?variant=67746394538353","manufacturerUrl":"https://www.methodracewheels.com/products/305-nv-matte-black?variant=67746394538353","specUrl":"https://www.methodracewheels.com/products/305-nv-matte-black?variant=67746394538353","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":399,"url":"https://www.methodracewheels.com/products/305-nv-matte-black?variant=67746394538353"}],"note":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Matte Black / 17×8.5 / +25 mm","finish":"Matte Black","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746394538353,"specs":"17×8.5 in; 6×139.7; +25 mm; 108.0 mm bore; 2500.0 lb rated load per wheel; 28.95 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1995,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Matte Black","choice":null,"priceAmount":399,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method305-double-black","brand":"METHOD","name":"305 NV · Double Black®","sku":"MR305785601025","image":"method-mr305785601025","unit":419,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":108,"capacity":2500,"mass":28.55,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-305-nv-17-8-5-25?variant=wh-method305-double-black","source":"https://www.methodracewheels.com/products/305-double-black?variant=67746370683249","manufacturerUrl":"https://www.methodracewheels.com/products/305-double-black?variant=67746370683249","specUrl":"https://www.methodracewheels.com/products/305-double-black?variant=67746370683249","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":419,"url":"https://www.methodracewheels.com/products/305-double-black?variant=67746370683249"}],"note":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Double Black® / 17×8.5 / +25 mm","finish":"Double Black®","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746370683249,"specs":"17×8.5 in; 6×139.7; +25 mm; 108.0 mm bore; 2500.0 lb rated load per wheel; 28.55 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":2095,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Double Black®","choice":null,"priceAmount":419,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method305-method-bronze-matte-black-lip","brand":"METHOD","name":"305 NV · Method Bronze® - Matte Black Lip","sku":"MR30578560925","image":"method-mr30578560925","unit":419,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":108,"capacity":2500,"mass":29.39,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-305-nv-17-8-5-25?variant=wh-method305-method-bronze-matte-black-lip","source":"https://www.methodracewheels.com/products/305-nv-bronze?variant=67746391687537","manufacturerUrl":"https://www.methodracewheels.com/products/305-nv-bronze?variant=67746391687537","specUrl":"https://www.methodracewheels.com/products/305-nv-bronze?variant=67746391687537","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":419,"url":"https://www.methodracewheels.com/products/305-nv-bronze?variant=67746391687537"}],"note":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Method Bronze® - Matte Black Lip / 17×8.5 / +25 mm","finish":"Method Bronze® - Matte Black Lip","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746391687537,"specs":"17×8.5 in; 6×139.7; +25 mm; 108.0 mm bore; 2500.0 lb rated load per wheel; 29.39 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":2095,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Method Bronze® - Matte Black Lip","choice":null,"priceAmount":419,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method305-machined-matte-black-lip","brand":"METHOD","name":"305 NV · Machined - Matte Black Lip","sku":"MR30578560325","image":"method-mr30578560325","unit":419,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":108,"capacity":2500,"mass":29.28,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-305-nv-17-8-5-25?variant=wh-method305-machined-matte-black-lip","source":"https://www.methodracewheels.com/products/305-nv-machined?variant=67746395881841","manufacturerUrl":"https://www.methodracewheels.com/products/305-nv-machined?variant=67746395881841","specUrl":"https://www.methodracewheels.com/products/305-nv-machined?variant=67746395881841","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":419,"url":"https://www.methodracewheels.com/products/305-nv-machined?variant=67746395881841"}],"note":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Machined - Matte Black Lip / 17×8.5 / +25 mm","finish":"Machined - Matte Black Lip","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":67746395881841,"specs":"17×8.5 in; 6×139.7; +25 mm; 108.0 mm bore; 2500.0 lb rated load per wheel; 29.28 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":2095,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Machined - Matte Black Lip","choice":null,"priceAmount":419,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 108.0 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method318","slug":"method-318-standard-non-beadlock-17-8-5-25","path":"/products/method-318-standard-non-beadlock-17-8-5-25","name":"318 Standard / non-beadlock · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method318","brand":"METHOD","name":"318 · Gloss Black","sku":"MR318785601325","image":"method-mr318785601325","unit":379,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":28.99,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-318-standard-non-beadlock-17-8-5-25?variant=wh-method318","source":"https://www.methodracewheels.com/products/318-gloss-black?variant=39962544504893","manufacturerUrl":"https://www.methodracewheels.com/products/318-gloss-black?variant=39962544504893","specUrl":"https://www.methodracewheels.com/products/318-gloss-black?variant=39962544504893","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":379,"url":"https://www.methodracewheels.com/products/318-gloss-black?variant=39962544504893"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Black / 17×8.5 / +25 mm","finish":"Gloss Black","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":39962544504893,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 28.99 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1895,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Black","choice":null,"priceAmount":379,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method318-machined-clear-coat","brand":"METHOD","name":"318 · Machined - Clear Coat","sku":"MR31878560325","image":"method-mr31878560325","unit":399,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":29.1,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-318-standard-non-beadlock-17-8-5-25?variant=wh-method318-machined-clear-coat","source":"https://www.methodracewheels.com/products/318-machined-clear-coat?variant=52181997551985","manufacturerUrl":"https://www.methodracewheels.com/products/318-machined-clear-coat?variant=52181997551985","specUrl":"https://www.methodracewheels.com/products/318-machined-clear-coat?variant=52181997551985","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":399,"url":"https://www.methodracewheels.com/products/318-machined-clear-coat?variant=52181997551985"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Machined - Clear Coat / 17×8.5 / +25 mm","finish":"Machined - Clear Coat","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52181997551985,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 29.1 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1995,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Machined - Clear Coat","choice":null,"priceAmount":399,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method318-method-bronze","brand":"METHOD","name":"318 · Method Bronze®","sku":"MR31878560925","image":"method-mr31878560925","unit":379,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":29.14,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-318-standard-non-beadlock-17-8-5-25?variant=wh-method318-method-bronze","source":"https://www.methodracewheels.com/products/318-method-bronze?variant=39962549583933","manufacturerUrl":"https://www.methodracewheels.com/products/318-method-bronze?variant=39962549583933","specUrl":"https://www.methodracewheels.com/products/318-method-bronze?variant=39962549583933","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":379,"url":"https://www.methodracewheels.com/products/318-method-bronze?variant=39962549583933"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Method Bronze® / 17×8.5 / +25 mm","finish":"Method Bronze®","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":39962549583933,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 29.14 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1895,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Method Bronze®","choice":null,"priceAmount":379,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method321","slug":"method-321-standard-non-beadlock-17-8-5-25","path":"/products/method-321-standard-non-beadlock-17-8-5-25","name":"321 Standard / non-beadlock · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method321","brand":"METHOD","name":"321 · Gloss Black","sku":"MR321785601325","image":"method-mr321785601325","unit":379,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":30.2,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-321-standard-non-beadlock-17-8-5-25?variant=wh-method321","source":"https://www.methodracewheels.com/products/321-gloss-black?variant=55174989382001","manufacturerUrl":"https://www.methodracewheels.com/products/321-gloss-black?variant=55174989382001","specUrl":"https://www.methodracewheels.com/products/321-gloss-black?variant=55174989382001","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":379,"url":"https://www.methodracewheels.com/products/321-gloss-black?variant=55174989382001"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Black / 17×8.5 / +25 mm","finish":"Gloss Black","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":55174989382001,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 30.2 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1895,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Black","choice":null,"priceAmount":379,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method321-machined-clear-coat","brand":"METHOD","name":"321 · Machined - Clear Coat","sku":"MR32178560325","image":"method-mr32178560325","unit":399,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":30.2,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-321-standard-non-beadlock-17-8-5-25?variant=wh-method321-machined-clear-coat","source":"https://www.methodracewheels.com/products/321-machined-clear-coat?variant=55174987546993","manufacturerUrl":"https://www.methodracewheels.com/products/321-machined-clear-coat?variant=55174987546993","specUrl":"https://www.methodracewheels.com/products/321-machined-clear-coat?variant=55174987546993","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":399,"url":"https://www.methodracewheels.com/products/321-machined-clear-coat?variant=55174987546993"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Machined - Clear Coat / 17×8.5 / +25 mm","finish":"Machined - Clear Coat","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":55174987546993,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 30.2 lb bare wheel. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1995,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Machined - Clear Coat","choice":null,"priceAmount":399,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method323","slug":"method-323-standard-non-beadlock-17-8-5-25","path":"/products/method-323-standard-non-beadlock-17-8-5-25","name":"323 Standard / non-beadlock · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method323","brand":"METHOD","name":"323 · Gloss Black","sku":"MR323785601325","image":"method-mr323785601325","unit":379,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":null,"backspacing":null,"boltPattern":"6 × 139.7","url":"/products/method-323-standard-non-beadlock-17-8-5-25?variant=wh-method323","source":"https://www.methodracewheels.com/products/323-gloss-black?variant=52076863586673","manufacturerUrl":"https://www.methodracewheels.com/products/323-gloss-black?variant=52076863586673","specUrl":"https://www.methodracewheels.com/products/323-gloss-black?variant=52076863586673","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":379,"url":"https://www.methodracewheels.com/products/323-gloss-black?variant=52076863586673"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Black / 17×8.5 / +25 mm","finish":"Gloss Black","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52076863586673,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; Bare-wheel mass unknown. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1895,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Black","choice":null,"priceAmount":379,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method323-gloss-method-bronze","brand":"METHOD","name":"323 · Gloss Method Bronze®","sku":"MR323785601525","image":"method-mr323785601525","unit":379,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":null,"backspacing":null,"boltPattern":"6 × 139.7","url":"/products/method-323-standard-non-beadlock-17-8-5-25?variant=wh-method323-gloss-method-bronze","source":"https://www.methodracewheels.com/products/323-gloss-bronze?variant=52076864668017","manufacturerUrl":"https://www.methodracewheels.com/products/323-gloss-bronze?variant=52076864668017","specUrl":"https://www.methodracewheels.com/products/323-gloss-bronze?variant=52076864668017","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":379,"url":"https://www.methodracewheels.com/products/323-gloss-bronze?variant=52076864668017"}],"note":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Method Bronze® / 17×8.5 / +25 mm","finish":"Gloss Method Bronze®","technology":"Standard / non-beadlock","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52076864668017,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; Bare-wheel mass unknown. Standard / non-beadlock.","cat":"wheels","realRolling":true,"price":1895,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Method Bronze®","choice":null,"priceAmount":379,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Standard / non-beadlock rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No manufacturer bare-wheel mass published for this selected SKU. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method705","slug":"method-705-bead-grip-17-8-5-35","path":"/products/method-705-bead-grip-17-8-5-35","name":"705 Bead Grip · 17×8.5 +35","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method705","brand":"METHOD","name":"705 · Matte Black","sku":"MR70578560535","image":"method-mr70578560535","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":25.24,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-705-bead-grip-17-8-5-35?variant=wh-method705","source":"https://www.methodracewheels.com/products/705-matte-black?variant=33043117801533","manufacturerUrl":"https://www.methodracewheels.com/products/705-matte-black?variant=33043117801533","specUrl":"https://www.methodracewheels.com/products/705-matte-black?variant=33043117801533","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/705-matte-black?variant=33043117801533"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Matte Black / 17×8.5 / +35 mm","finish":"Matte Black","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":33043117801533,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 25.24 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Matte Black","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method705-titanium","brand":"METHOD","name":"705 · Titanium","sku":"MR70578560835","image":"method-mr70578560835","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":35,"bore":106.25,"capacity":2650,"mass":25.24,"backspacing":6.2,"boltPattern":"6 × 139.7","url":"/products/method-705-bead-grip-17-8-5-35?variant=wh-method705-titanium","source":"https://www.methodracewheels.com/products/705-matte-titanium?variant=39338185293885","manufacturerUrl":"https://www.methodracewheels.com/products/705-matte-titanium?variant=39338185293885","specUrl":"https://www.methodracewheels.com/products/705-matte-titanium?variant=39338185293885","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/705-matte-titanium?variant=39338185293885"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Titanium / 17×8.5 / +35 mm","finish":"Titanium","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":39338185293885,"specs":"17×8.5 in; 6×139.7; +35 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 25.24 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +35 mm · 6 × 139.7","label":"Titanium","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method707","slug":"method-707-bead-grip-17-8-5-25","path":"/products/method-707-bead-grip-17-8-5-25","name":"707 Bead Grip · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method707","brand":"METHOD","name":"707 · Matte Black","sku":"MR70778560525","image":"method-mr70778560525","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":29.69,"backspacing":5.7,"boltPattern":"6 × 139.7","url":"/products/method-707-bead-grip-17-8-5-25?variant=wh-method707","source":"https://www.methodracewheels.com/products/707-matte-black?variant=39783909228605","manufacturerUrl":"https://www.methodracewheels.com/products/707-matte-black?variant=39783909228605","specUrl":"https://www.methodracewheels.com/products/707-matte-black?variant=39783909228605","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/707-matte-black?variant=39783909228605"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Matte Black / 17×8.5 / +25 mm","finish":"Matte Black","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":39783909228605,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 29.69 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Matte Black","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"wh-method708","slug":"method-708-bead-grip-17-8-5-25","path":"/products/method-708-bead-grip-17-8-5-25","name":"708 Bead Grip · 17×8.5 +25","brand":"METHOD","brandPath":"/brands/method","category":"wheels","categorySlug":"wheels-and-tires","addedOn":"2026-10-29","defaultIndex":0,"variants":[{"id":"wh-method708","brand":"METHOD","name":"708 · Gloss Black","sku":"MR708785601325","image":"method-mr708785601325","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":30.58,"backspacing":null,"boltPattern":"6 × 139.7","url":"/products/method-708-bead-grip-17-8-5-25?variant=wh-method708","source":"https://www.methodracewheels.com/products/708-gloss-black?variant=52076860277105","manufacturerUrl":"https://www.methodracewheels.com/products/708-gloss-black?variant=52076860277105","specUrl":"https://www.methodracewheels.com/products/708-gloss-black?variant=52076860277105","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/708-gloss-black?variant=52076860277105"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Black / 17×8.5 / +25 mm","finish":"Gloss Black","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52076860277105,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 30.58 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Black","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null},{"id":"wh-method708-gloss-titanium","brand":"METHOD","name":"708 · Gloss Titanium","sku":"MR70878560825","image":"method-mr70878560825","unit":409,"slot":"wheel","diameter":17,"width":8.5,"offset":25,"bore":106.25,"capacity":2650,"mass":30.58,"backspacing":null,"boltPattern":"6 × 139.7","url":"/products/method-708-bead-grip-17-8-5-25?variant=wh-method708-gloss-titanium","source":"https://www.methodracewheels.com/products/708-gloss-titanium?variant=52076860998001","manufacturerUrl":"https://www.methodracewheels.com/products/708-gloss-titanium?variant=52076860998001","specUrl":"https://www.methodracewheels.com/products/708-gloss-titanium?variant=52076860998001","seller":"Method Race Wheels","offers":[{"seller":"Method Race Wheels","price":409,"url":"https://www.methodracewheels.com/products/708-gloss-titanium?variant=52076860998001"}],"note":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","explain":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","fitment":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","fitmentPending":true,"variant":"Gloss Titanium / 17×8.5 / +25 mm","finish":"Gloss Titanium","technology":"Bead Grip","weightBasis":"Method storefront specification data matched by exact manufacturer SKU and Shopify variant ID. Wheel Weight (lbs) is bare-wheel product mass; Package weights / Shopify shipping grams are not used. Net installed addition requires removed factory wheel mass.","checked":"October 29, 2026 (America/New_York)","available":true,"methodVariantId":52076860998001,"specs":"17×8.5 in; 6×139.7; +25 mm; 106.25 mm bore; 2650.0 lb rated load per wheel; 30.58 lb bare wheel. Bead Grip.","cat":"wheels","realRolling":true,"price":2045,"weight":null,"hmin":0,"hmax":0,"icon":"◉","visual":"wheel","desc":"17 × 8.5 · +25 mm · 6 × 139.7","label":"Gloss Titanium","choice":null,"priceAmount":409,"priceBasis":"each wheel","sourceChecked":"October 29, 2026 (America/New_York)","fitmentText":"US 2024+ LC250 comparison candidate, including 1958 / Land Cruiser and 2024 First Edition; exact year/grade/VIN, hub, lugs, brake/spoke clearance and tire fit require supplier confirmation. The maker high-offset collection and bolt pattern do not by themselves certify this exact LC250 application.","installHours":[1.5,2.5],"installBasis":"Shared professional planning estimate for five wheel/tire assemblies: mounting, balancing, TPMS and refitting review. Count once for the combined job; four assemblies use a 1–2 hr allowance. This is not manufacturer-published time.","requirements":[{"label":"Compatible tires","status":"check","detail":"Confirm existing tires or choose 17″ tires with an approved width and sufficient capacity.","page":"wheels"},{"label":"Lug nuts, hub arrangement and TPMS","status":"check","detail":"Bead Grip rim design. 106.25 mm bore: confirm LC250 supplier-approved centering, lug seat/thread engagement, hub/cap and brake clearance. Compared with an equal-width +35 wheel, +25 moves the wheel outward by 10 mm; tire/fender clearance still requires measurement. No blanket no-rub claim, especially with 35-inch tires; check full lock/bump and spare mounting.","page":"wheels"},{"label":"Brake clearance and spare fit","status":"check","detail":"Check the exact wheel against the brake system and verify spare usability. Wheel diameter alone is insufficient.","page":"wheels"}],"documents":[{"id":"reference-method-offsets","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method truck and car offsets explained","url":"https://cdn.shopify.com/s/files/1/0116/6842/files/Method_Offsets_Explained_Web_9b349fba-7115-42bc-b5aa-df5cd4b23100.pdf?v=1635189654","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer wheel-geometry reference · not LC250 fitment or a mounting procedure","match":"general","purpose":"reference","note":"Explains offset and backspacing. Does not establish fender clearance, centering hardware, brake fit, tire mounting or vehicle lug torque.","checked":"2026-10-29"},{"id":"reference-method-wheel-support","productIds":["wh-method305","wh-method305-double-black","wh-method305-method-bronze-matte-black-lip","wh-method305-machined-matte-black-lip","wh-method318","wh-method318-machined-clear-coat","wh-method318-method-bronze","wh-method321","wh-method321-machined-clear-coat","wh-method323","wh-method323-gloss-method-bronze","wh-method703","wh-method703-gloss-titanium","wh-method703-machined-clear-coat","wh-method703-method-bronze","wh-method705","wh-method705-titanium","wh-method707","wh-method708","wh-method708-gloss-titanium"],"type":"reference","title":"Method official wheel FAQ and support","url":"https://www.methodracewheels.com/pages/faq","source":"https://www.methodracewheels.com/pages/faq","publisher":"Method Race Wheels","official":true,"scope":"Manufacturer support · exact non-beadlock wheel / LC250 mounting instructions still required","match":"family","purpose":"reference","note":"Request correct lug seat, hardware, torque and centering for the selected SKU/vehicle. The FAQ links beadlock ring instructions; those are not assigned as instructions for these Standard or Bead Grip wheels. Existing mounting video is a general independent shop example.","checked":"2026-10-29"}],"videos":[{"url":"https://www.youtube.com/watch?v=D3etW-RDe4M","title":"Tire Mount & Balance Tutorial — Full Process","creator":"Tires Wheels Sensors / TWS","scope":"General shop procedure","note":"Wheel removal, tire mounting, TPMS, balancing and refitting. Not an exact tire-SKU or LC250 fitment demonstration."}],"reviews":[],"clearance":null}]},{"id":"br-oem-calipers","slug":"toyota-oe-front-caliper-pair-front","path":"/products/toyota-oe-front-caliper-pair-front","name":"Toyota OE front caliper pair","brand":"Toyota Genuine","brandPath":"/brands/toyota-genuine","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-oem-calipers","name":"Toyota OE front caliper pair","brand":"TOYOTA GENUINE","axle":"Front","kind":"calipers","sku":"47750-60470 + 47730-60470","price":325.66,"image":null,"compound":"Factory pad shape retained","purpose":"Factory brake repair / replacement","desc":"Left and right Toyota front caliper assemblies, priced together. This restores factory configuration; it is not a big-brake upgrade.","source":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-caliper-4775060470","rotor":"Retain VIN-correct factory-size rotors","includes":"One 47750-60470 left and one 47730-60470 right front caliper assembly. Pads, rotors, fluid and any unlisted hardware are separate.","support":"Confirm both part numbers by VIN with Toyota. Inspect matching pads, rotors, hoses and hardware; quote approved fluid and professional bleeding. New calipers are not automatically needed for a pad/rotor upgrade.","components":[{"sku":"47750-60470","price":162.83,"url":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-caliper-4775060470"},{"sku":"47730-60470","price":162.83,"url":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-caliper-4773060470"}],"offers":[{"seller":"Sparks Toyota · left + right assemblies","price":325.66,"url":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-caliper-4775060470"}],"cat":"calipers","realBrake":true,"weight":null,"weightVerified":false,"hmin":2,"hmax":4,"slot":"brake-front-calipers","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Confirm both part numbers by VIN with Toyota. Inspect matching pads, rotors, hoses and hardware; quote approved fluid and professional bleeding. New calipers are not automatically needed for a pad/rotor upgrade.","label":"Left and right Toyota front caliper assemblies, priced together. This restores factory configuration; it is not a big-brake upgrade.","choice":null,"url":"/products/toyota-oe-front-caliper-pair-front","priceAmount":325.66,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[2,4],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Left + right factory caliper assemblies","status":"included","detail":"One 47750-60470 left and one 47730-60470 right front caliper assembly. Pads, rotors, fluid and any unlisted hardware are separate."},{"label":"Factory-shape pads","status":"check","detail":"Retain serviceable correct pads or choose compatible replacements.","page":"pads"},{"label":"Factory-size rotors","status":"check","detail":"Inspect existing rotors and replace only if condition/specifications require.","page":"rotors"},{"label":"Approved fluid, hardware and professional bleeding","status":"quote","detail":"Verify supplied seals/pins/mounting hardware. Quote unlisted hardware and fluid, and follow Toyota hybrid brake bleeding procedures."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"br-oem-front-rotors","slug":"toyota-oe-front-rotor-pair-front","path":"/products/toyota-oe-front-rotor-pair-front","name":"Toyota OE front rotor pair","brand":"Toyota Genuine","brandPath":"/brands/toyota-genuine","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-oem-front-rotors","name":"Toyota OE front rotor pair","brand":"TOYOTA GENUINE","axle":"Front","kind":"rotors","sku":"43512-60281 × 2","price":147.18,"unit":73.59,"image":null,"compound":"Factory replacement rotor","purpose":"Original-size rotor service","desc":"Two Toyota front rotors. Listed at $73.59 each; this catalog uses the two-rotor axle total.","source":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-rotor-4351260281","rotor":"Disc diameter / thickness pending VIN verification","includes":"Two 43512-60281 front rotors. Pads and calipers are not included.","support":"Confirm VIN, original rotor dimensions and factory-caliper compatibility. These are not replacements for Powerbrake kit rotors.","offers":[{"seller":"Sparks Toyota · two rotors","price":147.18,"url":"https://www.sparksparts.com/oem-parts/toyota-2024-toyota-land-cruiser-rotor-4351260281"}],"cat":"rotors","realBrake":true,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":2.5,"slot":"brake-front-rotors","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Confirm VIN, original rotor dimensions and factory-caliper compatibility. These are not replacements for Powerbrake kit rotors.","label":"Two Toyota front rotors. Listed at $73.59 each; this catalog uses the two-rotor axle total.","choice":null,"url":"/products/toyota-oe-front-rotor-pair-front","priceAmount":147.18,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1.5,2.5],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Two front rotors","status":"included","detail":"Two 43512-60281 front rotors. Pads and calipers are not included."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Compatible pads for the factory calipers","status":"check","detail":"No pads are included. Have the installer assess existing pads and specify compatible pads if replacement is required.","page":"pads"},{"label":"Rotor dimensions, hub condition and runout","status":"check","detail":"Confirm the exact disc specification and inspect the mounting surface. Packaging dimensions are not rotor dimensions."},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota hybrid brake procedures and the pad / rotor manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"br-oem-rear-rotors","slug":"toyota-oe-rear-rotor-pair-rear","path":"/products/toyota-oe-rear-rotor-pair-rear","name":"Toyota OE rear rotor pair","brand":"Toyota Genuine","brandPath":"/brands/toyota-genuine","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-oem-rear-rotors","name":"Toyota OE rear rotor pair","brand":"TOYOTA GENUINE","axle":"Rear","kind":"rotors","sku":"42431-60350 × 2","price":243.48,"unit":121.74,"image":null,"compound":"Factory replacement rotor","purpose":"Original-size rotor service","desc":"Two Toyota rear rotors. Listed at $121.74 each; the build uses $243.48 for the pair.","source":"https://parts.elmhursttoyota.com/oem-parts/toyota-disc-brake-rotor-4243160350","rotor":"Disc diameter / thickness pending VIN verification","includes":"Two 42431-60350 rear rotors. Pads and calipers are not included.","support":"Confirm exact VIN and factory rear brake arrangement. Use Toyota hybrid-brake and rear parking-brake service procedures.","offers":[{"seller":"Elmhurst Toyota · two rotors","price":243.48,"url":"https://parts.elmhursttoyota.com/oem-parts/toyota-disc-brake-rotor-4243160350"}],"cat":"rotors","realBrake":true,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":2.5,"slot":"brake-rear-rotors","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Confirm exact VIN and factory rear brake arrangement. Use Toyota hybrid-brake and rear parking-brake service procedures.","label":"Two Toyota rear rotors. Listed at $121.74 each; the build uses $243.48 for the pair.","choice":null,"url":"/products/toyota-oe-rear-rotor-pair-rear","priceAmount":243.48,"priceBasis":"rear axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1.5,2.5],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Two front rotors","status":"included","detail":"Two 42431-60350 rear rotors. Pads and calipers are not included."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Compatible pads for the factory calipers","status":"check","detail":"No pads are included. Have the installer assess existing pads and specify compatible pads if replacement is required.","page":"pads"},{"label":"Rotor dimensions, hub condition and runout","status":"check","detail":"Confirm the exact disc specification and inspect the mounting surface. Packaging dimensions are not rotor dimensions."},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota rear parking-brake and hybrid brake procedures, plus the pad manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[],"videos":[],"reviews":[],"clearance":null}]},{"id":"br-z17-rear","slug":"powerstop-z17-evolution-ceramic-rear-pads-rear","path":"/products/powerstop-z17-evolution-ceramic-rear-pads-rear","name":"Z17 Evolution Ceramic · rear pads","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-z17-rear","name":"Z17 Evolution Ceramic · rear pads","brand":"POWERSTOP","axle":"Rear","kind":"pads","sku":"17-2439","price":62.57,"image":"z17","compound":"Ceramic","purpose":"Stock replacement / daily use","desc":"Rear axle ceramic pad set for the factory brake configuration.","source":"https://yotaxpedition.com/products/z17-evolution-ceramic-brake-pads-3rd-gen-tundra","includes":"Rear pad set, shims and listed installation hardware.","support":"Current seller title lists LC250 from 2025. Confirm any other year with PowerStop and your VIN. Inspect retained calipers and rotors.","years":["2025"],"cat":"pads","realBrake":true,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"slot":"brake-rear","icon":"◉","visual":"brakes","explain":"Current seller title lists LC250 from 2025. Confirm any other year with PowerStop and your VIN. Inspect retained calipers and rotors.","offers":[{"seller":"Yota Xpedition","price":62.57,"url":"https://yotaxpedition.com/products/z17-evolution-ceramic-brake-pads-3rd-gen-tundra"}],"label":"Rear axle ceramic pad set for the factory brake configuration.","choice":null,"url":"/products/powerstop-z17-evolution-ceramic-rear-pads-rear","priceAmount":62.57,"priceBasis":"rear axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2025 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1,2],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Axle pad set and listed hardware","status":"included","detail":"Rear pad set, shims and listed installation hardware."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Correct-size, serviceable rotors","status":"check","detail":"Factory rotors may be retained if inspection confirms correct dimensions, thickness and condition. New rotors are not automatically required.","page":"rotors"},{"label":"Rotor replacement / machining","status":"conditional","detail":"Only if inspection calls for it. Extra parts and machining are outside the pad-only price.","page":"rotors"},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota rear parking-brake and hybrid brake procedures, plus the pad manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[],"clearance":null}]},{"id":"br-rotor-front","slug":"powerstop-evolution-coated-front-rotor-pair-front","path":"/products/powerstop-evolution-coated-front-rotor-pair-front","name":"Evolution Coated · front rotor pair","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-rotor-front","name":"Evolution Coated · front rotor pair","brand":"POWERSTOP","axle":"Front","kind":"rotors","sku":"JBR1940EVC × 2","price":121.92,"unit":60.96,"image":"rotor","compound":"GEOMET-coated OE replacement","purpose":"Factory-size rotor replacement","desc":"Two front rotors. Seller lists $60.96 each; this build prices the required axle pair at $121.92.","source":"https://www.autobarn.net/products/powerstop-powerstop-evolution-coated-rotor-pa-p8jbr1940evc","years":["2024","2025"],"rotor":"Disc diameter / thickness not verified","includes":"Two JBR1940EVC front rotors. Pads, calipers and additional hardware are not included.","support":"For the factory brake configuration. Confirm exact VIN, disc dimensions and original caliper compatibility. Not a rotor replacement for Powerbrake X-Line or M-Line. Pair with appropriate factory-caliper pads; pad condition and bedding need installer review.","cat":"rotors","realBrake":true,"weight":null,"weightVerified":false,"hmin":1.5,"hmax":2.5,"slot":"brake-front-rotors","icon":"◉","visual":"brakes","explain":"For the factory brake configuration. Confirm exact VIN, disc dimensions and original caliper compatibility. Not a rotor replacement for Powerbrake X-Line or M-Line. Pair with appropriate factory-caliper pads; pad condition and bedding need installer review.","offers":[{"seller":"Auto Barn","price":121.92,"url":"https://www.autobarn.net/products/powerstop-powerstop-evolution-coated-rotor-pa-p8jbr1940evc"}],"label":"Two front rotors. Seller lists $60.96 each; this build prices the required axle pair at $121.92.","choice":null,"url":"/products/powerstop-evolution-coated-front-rotor-pair-front","priceAmount":121.92,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1.5,2.5],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Two front rotors","status":"included","detail":"Two JBR1940EVC front rotors. Pads, calipers and additional hardware are not included."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Compatible pads for the factory calipers","status":"check","detail":"No pads are included. Have the installer assess existing pads and specify compatible pads if replacement is required.","page":"pads"},{"label":"Rotor dimensions, hub condition and runout","status":"check","detail":"Confirm the exact disc specification and inspect the mounting surface. Packaging dimensions are not rotor dimensions."},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota hybrid brake procedures and the pad / rotor manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[],"clearance":null}]},{"id":"br-z17-front","slug":"powerstop-z17-evolution-ceramic-front-pads-front","path":"/products/powerstop-z17-evolution-ceramic-front-pads-front","name":"Z17 Evolution Ceramic · front pads","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-z17-front","name":"Z17 Evolution Ceramic · front pads","brand":"POWERSTOP","axle":"Front","kind":"pads","sku":"17-2442","price":82.97,"image":"z17","compound":"Ceramic","purpose":"Stock replacement / daily use","desc":"A value-focused replacement pad set for serviceable factory front brakes.","source":"https://yotaxpedition.com/products/z17-evolution-ceramic-brake-pads-3rd-gen-tundra","includes":"Axle pad set, shims and installation hardware.","support":"Retain serviceable factory calipers and correct OE-size rotors. Inspect rotor thickness and condition; replacement or machining is extra if required.","cat":"pads","realBrake":true,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"slot":"brake-front","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Retain serviceable factory calipers and correct OE-size rotors. Inspect rotor thickness and condition; replacement or machining is extra if required.","offers":[{"seller":"Yota Xpedition","price":82.97,"url":"https://yotaxpedition.com/products/z17-evolution-ceramic-brake-pads-3rd-gen-tundra"}],"label":"A value-focused replacement pad set for serviceable factory front brakes.","choice":null,"url":"/products/powerstop-z17-evolution-ceramic-front-pads-front","priceAmount":82.97,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1,2],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Axle pad set and listed hardware","status":"included","detail":"Axle pad set, shims and installation hardware."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Correct-size, serviceable rotors","status":"check","detail":"Factory rotors may be retained if inspection confirms correct dimensions, thickness and condition. New rotors are not automatically required.","page":"rotors"},{"label":"Rotor replacement / machining","status":"conditional","detail":"Only if inspection calls for it. Extra parts and machining are outside the pad-only price.","page":"rotors"},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota hybrid brake procedures and the pad / rotor manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[],"clearance":null}]},{"id":"br-z23-front","slug":"powerstop-z23-evolution-sport-front-pads-front","path":"/products/powerstop-z23-evolution-sport-front-pads-front","name":"Z23 Evolution Sport · front pads","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-z23-front","name":"Z23 Evolution Sport · front pads","brand":"POWERSTOP","axle":"Front","kind":"pads","sku":"Z23-2442","price":100.71,"image":"z23","compound":"Carbon-fiber ceramic","purpose":"Daily driving","desc":"A daily-use pad option that keeps the factory caliper and rotor dimensions.","source":"https://yotaxpedition.com/products/z23-evolution-sport-carbon-fiber-front-brake-pads-3rd-gen-tundra","includes":"Axle pad set, shims, hardware and brake lubricant.","support":"Retain serviceable factory calipers and correct OE-size rotors. Inspect rotors and confirm VIN-specific fitment before ordering.","cat":"pads","realBrake":true,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"slot":"brake-front","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Retain serviceable factory calipers and correct OE-size rotors. Inspect rotors and confirm VIN-specific fitment before ordering.","offers":[{"seller":"Yota Xpedition","price":100.71,"url":"https://yotaxpedition.com/products/z23-evolution-sport-carbon-fiber-front-brake-pads-3rd-gen-tundra"}],"label":"A daily-use pad option that keeps the factory caliper and rotor dimensions.","choice":null,"url":"/products/powerstop-z23-evolution-sport-front-pads-front","priceAmount":100.71,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1,2],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Axle pad set and listed hardware","status":"included","detail":"Axle pad set, shims, hardware and brake lubricant."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Correct-size, serviceable rotors","status":"check","detail":"Factory rotors may be retained if inspection confirms correct dimensions, thickness and condition. New rotors are not automatically required.","page":"rotors"},{"label":"Rotor replacement / machining","status":"conditional","detail":"Only if inspection calls for it. Extra parts and machining are outside the pad-only price.","page":"rotors"},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota hybrid brake procedures and the pad / rotor manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[{"id":"z23-mustang","productIds":["br-z23-front"],"author":"SnowFox","date":"2024-06-28","source":"https://www.mustang6g.com/forums/threads/quick-review-of-power-stop-z23.203008/","sourceName":"Owner forum report","kind":"owner","scope":"Z23 compound family only; different vehicle/caliper/pad SKU","context":"Mustang; factory rotors retained","summary":"Reports much less dust, smoother stops, more pedal effort and brief morning squeaking.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"br-z36-front","slug":"powerstop-z36-truck-tow-front-pads-front","path":"/products/powerstop-z36-truck-tow-front-pads-front","name":"Z36 Truck & Tow · front pads","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-z36-front","name":"Z36 Truck & Tow · front pads","brand":"POWERSTOP","axle":"Front","kind":"pads","sku":"Z36-2442","price":123,"image":"z36","compound":"Carbon-fiber ceramic","purpose":"Towing / hauling / off-road use","desc":"PowerStop’s load-oriented pad compound, without changing the factory calipers.","source":"https://yotaxpedition.com/products/z36-truck-tow-carbon-fiber-ceramic-brake-pads-3rd-gen-tundra","includes":"Axle pad set, stainless shims, hardware and brake lubricant.","support":"Retain serviceable factory calipers and correct OE-size rotors. Rotor condition and heat management still matter; pads alone do not add rotor thermal capacity.","offers":[{"seller":"Yota Xpedition","price":123,"url":"https://yotaxpedition.com/products/z36-truck-tow-carbon-fiber-ceramic-brake-pads-3rd-gen-tundra"},{"seller":"LIMIT+1","price":123,"url":"https://limitplus1.com/products/powerstop-2024-land-cruiser-front-z36-truck-tow-brake-pads-w-hardware"}],"cat":"pads","realBrake":true,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"slot":"brake-front","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"Retain serviceable factory calipers and correct OE-size rotors. Rotor condition and heat management still matter; pads alone do not add rotor thermal capacity.","label":"PowerStop’s load-oriented pad compound, without changing the factory calipers.","choice":null,"url":"/products/powerstop-z36-truck-tow-front-pads-front","priceAmount":123,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1,2],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Axle pad set and listed hardware","status":"included","detail":"Axle pad set, stainless shims, hardware and brake lubricant."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Correct-size, serviceable rotors","status":"check","detail":"Factory rotors may be retained if inspection confirms correct dimensions, thickness and condition. New rotors are not automatically required.","page":"rotors"},{"label":"Rotor replacement / machining","status":"conditional","detail":"Only if inspection calls for it. Extra parts and machining are outside the pad-only price.","page":"rotors"},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota hybrid brake procedures and the pad / rotor manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[{"id":"z36-lc200","productIds":["br-z36-front","br-z36-rear"],"author":"RT Cruiser","date":"2024-03-07","source":"https://forum.ih8mud.com/threads/review-power-stop-z36-k4117-36-rotors-and-pads-after-68-580-miles.1334013/","sourceName":"Owner forum report","kind":"owner","scope":"Z36 family only; different vehicle and rotors bundled with pads","context":"2008 LC200; K4117-36; conservative driving and limited towing","summary":"Reports 68,580 miles on a Z36 pad/rotor kit and plans to replace it with the same kit.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"br-z36-rear","slug":"powerstop-z36-truck-tow-rear-pads-rear","path":"/products/powerstop-z36-truck-tow-rear-pads-rear","name":"Z36 Truck & Tow · rear pads","brand":"POWERSTOP","brandPath":"/brands/powerstop","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-z36-rear","name":"Z36 Truck & Tow · rear pads","brand":"POWERSTOP","axle":"Rear","kind":"pads","sku":"Z36-2439","price":94.22,"image":"z36","compound":"Carbon-fiber ceramic","purpose":"Towing / hauling / off-road use","desc":"Rear axle pad set; keeps the factory rear calipers and parking-brake system.","source":"https://yotaxpedition.com/products/z36-truck-tow-carbon-fiber-ceramic-brake-pads-3rd-gen-tundra","includes":"Rear axle pad set, shims, hardware and brake lubricant.","support":"Seller’s current LC250 listing starts at 2025. Confirm 2024 and 2026 fitment with PowerStop and your VIN. Have the installer follow the vehicle-specific rear brake service procedure.","years":["2025"],"cat":"pads","realBrake":true,"weight":null,"weightVerified":false,"hmin":1,"hmax":2,"slot":"brake-rear","icon":"◉","visual":"brakes","explain":"Seller’s current LC250 listing starts at 2025. Confirm 2024 and 2026 fitment with PowerStop and your VIN. Have the installer follow the vehicle-specific rear brake service procedure.","offers":[{"seller":"Yota Xpedition","price":94.22,"url":"https://yotaxpedition.com/products/z36-truck-tow-carbon-fiber-ceramic-brake-pads-3rd-gen-tundra"}],"label":"Rear axle pad set; keeps the factory rear calipers and parking-brake system.","choice":null,"url":"/products/powerstop-z36-truck-tow-rear-pads-rear","priceAmount":94.22,"priceBasis":"rear axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2025 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[1,2],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Axle pad set and listed hardware","status":"included","detail":"Rear axle pad set, shims, hardware and brake lubricant."},{"label":"Factory calipers","status":"check","detail":"Retain serviceable factory calipers. These components are not compatible with the listed Powerbrake replacement-caliper systems."},{"label":"Correct-size, serviceable rotors","status":"check","detail":"Factory rotors may be retained if inspection confirms correct dimensions, thickness and condition. New rotors are not automatically required.","page":"rotors"},{"label":"Rotor replacement / machining","status":"conditional","detail":"Only if inspection calls for it. Extra parts and machining are outside the pad-only price.","page":"rotors"},{"label":"Vehicle-specific service and bedding","status":"check","detail":"Follow Toyota rear parking-brake and hybrid brake procedures, plus the pad manufacturer’s bedding instructions."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerstop-guide","productIds":["br-z17-front","br-z17-rear","br-z23-front","br-z36-front","br-z36-rear","br-rotor-front"],"type":"guide","title":"How to install a PowerStop brake kit","url":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","publisher":"PowerStop","scope":"General pads and rotors · not an LC250 service procedure","note":"Manufacturer reference for pad/rotor work. Does not cover Toyota hybrid brake control, rear parking-brake service, vehicle torque values or caliper replacement.","match":"general","official":true,"source":"https://www.powerstop.com/resources/installationguide-frontbrakepad/","purpose":"installation","checked":"2026-10-25"}],"videos":[{"manufacturerLinked":true,"checked":"2026-10-25","url":"https://www.youtube.com/watch?v=a4gF4toD-CQ","title":"Z36 pad and rotor installation on a Jeep Wrangler JK","creator":"Jason Lewis / PowerStop support library","scope":"Product family reference · different vehicle","note":"Shows pad and rotor installation on a 2013 Jeep JK. This is not an LC250 hybrid or rear parking-brake procedure, and does not cover Powerbrake calipers. Use Toyota service information and your exact product instructions.","source":"https://www.powerstop.com/support-installs/"}],"reviews":[{"id":"z36-lc200","productIds":["br-z36-front","br-z36-rear"],"author":"RT Cruiser","date":"2024-03-07","source":"https://forum.ih8mud.com/threads/review-power-stop-z36-k4117-36-rotors-and-pads-after-68-580-miles.1334013/","sourceName":"Owner forum report","kind":"owner","scope":"Z36 family only; different vehicle and rotors bundled with pads","context":"2008 LC200; K4117-36; conservative driving and limited towing","summary":"Reports 68,580 miles on a Z36 pad/rotor kit and plans to replace it with the same kit.","sourceVerified":false,"verification":"Self-reported owner/use; purchase and configuration not independently verified","checked":"2026-10-25"}],"clearance":null}]},{"id":"br-x17","slug":"powerbrake-x-line-17-inch-wheel-option-front","path":"/products/powerbrake-x-line-17-inch-wheel-option-front","name":"X-Line · 17-inch wheel option","brand":"POWERBRAKE","brandPath":"/brands/powerbrake","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-x17","name":"X-Line · 17-inch wheel option","brand":"POWERBRAKE","axle":"Front","kind":"system","sku":"TOY428GREY-1","price":3350,"image":"xline","compound":"Matched high-performance pads","purpose":"Repeated heat / demanding loaded use","desc":"Grey calipers. A matched front brake system with pads, rotors, lines and mounting hardware.","source":"https://powerbrake.us/product/toyota-landcruiser-250-x-line-24-on/","minWheel":17,"rotor":"Exact LC250 rotor dimensions: confirmation pending","includes":"Pair of X-Line billet calipers, matched rotor pair, pads, brackets, braided brake lines and mounting hardware.","support":"17-inch minimum is a screening rule only. Obtain the exact kit template and check barrel, spoke and balance-weight clearance on the selected wheel. Fluid and shop supplies are additional.","cat":"systems","realBrake":true,"weight":null,"weightVerified":false,"hmin":3,"hmax":5,"slot":"brake-front","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"17-inch minimum is a screening rule only. Obtain the exact kit template and check barrel, spoke and balance-weight clearance on the selected wheel. Fluid and shop supplies are additional.","offers":[{"seller":"Powerbrake USA","price":3350,"url":"https://powerbrake.us/product/toyota-landcruiser-250-x-line-24-on/"}],"label":"Grey calipers. A matched front brake system with pads, rotors, lines and mounting hardware.","choice":null,"url":"/products/powerbrake-x-line-17-inch-wheel-option-front","priceAmount":3350,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[3,5],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Matched brake components","status":"included","detail":"Pair of X-Line billet calipers, matched rotor pair, pads, brackets, braided brake lines and mounting hardware."},{"label":"Wheel and spare clearance · 17″ minimum","status":"check","detail":"Obtain the exact kit template and verify barrel, spokes, balance weights and usable spare. Minimum diameter alone does not confirm fit.","page":"wheels"},{"label":"Brake fluid and shop supplies","status":"quote","detail":"Not included in the listed parts price. Installer must specify the approved fluid and quote the supply cost."},{"label":"Hydraulic compatibility, bleed and bedding","status":"check","detail":"Qualified installer must follow current Toyota hybrid brake procedures and the exact kit instructions, including hose travel and post-install checks."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerbrake-guide","productIds":["br-x17","br-x18"],"type":"manual","title":"X-Line big brake kit general installation manual","url":"https://www.powerbrake.co.za/downloads/A_General_X-Line_BBK_Installation_Instructions.pdf","publisher":"Powerbrake","scope":"X-Line system family · vehicle-specific supplement needed","note":"General matched-system installation and checks. Obtain the TOY427/428 mounting supplement and exact wheel template; this does not establish LC250 wheel clearance.","match":"family","official":true,"source":"https://www.powerbrake.co.za/downloads/A_General_X-Line_BBK_Installation_Instructions.pdf","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]},{"id":"br-x18","slug":"powerbrake-x-line-18-inch-wheel-option-front","path":"/products/powerbrake-x-line-18-inch-wheel-option-front","name":"X-Line · 18-inch wheel option","brand":"POWERBRAKE","brandPath":"/brands/powerbrake","category":"brakes","categorySlug":"brakes","addedOn":null,"defaultIndex":0,"variants":[{"id":"br-x18","name":"X-Line · 18-inch wheel option","brand":"POWERBRAKE","axle":"Front","kind":"system","sku":"TOY427GREY-2","price":3725,"image":"xline","compound":"Matched high-performance pads","purpose":"Repeated heat / demanding loaded use","desc":"Grey calipers. The separate 18-inch wheel variant; wheel template verification is essential.","source":"https://powerbrake.us/product/toyota-landcruiser-250-x-line-24-on/","minWheel":18,"rotor":"Exact LC250 rotor dimensions: confirmation pending","includes":"Pair of X-Line billet calipers, matched rotor pair, pads, brackets, braided brake lines and mounting hardware.","support":"18-inch minimum; a 17-inch wheel fails this screen. Diameter alone cannot establish fit. Obtain the exact template before buying wheels, including the spare. Fluid and shop supplies are additional.","cat":"systems","realBrake":true,"weight":null,"weightVerified":false,"hmin":3,"hmax":5,"slot":"brake-front","icon":"◉","visual":"brakes","years":["2024","2025","2026"],"explain":"18-inch minimum; a 17-inch wheel fails this screen. Diameter alone cannot establish fit. Obtain the exact template before buying wheels, including the spare. Fluid and shop supplies are additional.","offers":[{"seller":"Powerbrake USA","price":3725,"url":"https://powerbrake.us/product/toyota-landcruiser-250-x-line-24-on/"}],"label":"Grey calipers. The separate 18-inch wheel variant; wheel template verification is essential.","choice":null,"url":"/products/powerbrake-x-line-18-inch-wheel-option-front","priceAmount":3725,"priceBasis":"front axle package","sourceChecked":"October 25, 2026 · original catalog snapshot","fitmentText":"Catalog 2024 / 2025 / 2026 LC250 listing; confirm exact year, grade, VIN, axle and required components with the supplier.","installHours":[3,5],"installBasis":"Provisional task-based professional estimate for the stated axle work; bleeding, bedding, inspection and unpriced supporting work need a complete shop quote.","requirements":[{"label":"Matched brake components","status":"included","detail":"Pair of X-Line billet calipers, matched rotor pair, pads, brackets, braided brake lines and mounting hardware."},{"label":"Wheel and spare clearance · 18″ minimum","status":"check","detail":"Obtain the exact kit template and verify barrel, spokes, balance weights and usable spare. Minimum diameter alone does not confirm fit.","page":"wheels"},{"label":"Brake fluid and shop supplies","status":"quote","detail":"Not included in the listed parts price. Installer must specify the approved fluid and quote the supply cost."},{"label":"Hydraulic compatibility, bleed and bedding","status":"check","detail":"Qualified installer must follow current Toyota hybrid brake procedures and the exact kit instructions, including hose travel and post-install checks."},{"label":"Exact vehicle application","status":"check","detail":"The catalog listing is supporting evidence. Confirm the exact SKU, year, grade and VIN with the manufacturer before purchase."}],"documents":[{"id":"powerbrake-guide","productIds":["br-x17","br-x18"],"type":"manual","title":"X-Line big brake kit general installation manual","url":"https://www.powerbrake.co.za/downloads/A_General_X-Line_BBK_Installation_Instructions.pdf","publisher":"Powerbrake","scope":"X-Line system family · vehicle-specific supplement needed","note":"General matched-system installation and checks. Obtain the TOY427/428 mounting supplement and exact wheel template; this does not establish LC250 wheel clearance.","match":"family","official":true,"source":"https://www.powerbrake.co.za/downloads/A_General_X-Line_BBK_Installation_Instructions.pdf","purpose":"installation","checked":"2026-10-25"}],"videos":[],"reviews":[],"clearance":null}]}]}