# 23ZERO 23ZERO Kabari Z aluminum Z-lift rooftop tent

Canonical page: https://configmyrig.com/products/23zero-kabari-z-aluminum-z-lift-rooftop-tent

Two-person aluminum hard-shell tent with a second lifting section; a heavier alternative requiring a complete roof-load review.

## Selected configuration

- Part/component: 230HSKABZ
- Configuration: Kabari Z / 2 adults
- Listed parts: $4,495.00 USD / selected configuration
- Source checked: October 31, 2026 (America/Denver)
- Fitment: Universal rack-mounted tent sold by the US manufacturer. Not an LC250-specific approval. For US 2024+ LC250 1958 / Land Cruiser / 2024 First Edition, obtain vehicle/rack approval for combined driving and occupied parked loads before ordering.
- Product mass: 204 lb product mass
- Net vehicle addition: Net addition unverified
- Weight basis: 204 lb is the manufacturer’s stated mounting weight, not a shipping weight or a verified complete net vehicle addition. Inclusion of ladder/loose accessories in that figure is unconfirmed. Rack, added brackets and wiring remain separate; reconcile before final load planning.
- Professional install: 2–4 hr; researched planning estimate
- Basis: 2–4 hr researched professional planning estimate from the exact manual: unpack/assemble, organize the required lifting crew, position on a compatible existing rack, fasten/inspect, adjust ladder and test opening/closing. Person-hours versus elapsed multi-person time requires a shop quote. Rack installation, fabrication and a new protected 12 V circuit are additional; no manufacturer labor hours published.
- Contents: Tent with supplied mounting rails/plates and telescopic ladder; confirm full current packing list. Vehicle rack, LC250 brackets and protected 12 V circuit are separate.
- Critical specifications: Published mounting mass 204 lb; closed mounting footprint 55.25 W × 86.625 L × 9.5 H in including rails. Sleeping footprint 48 × 79.5 in; listed maximum internal height 58 in. Two adults; four-season design.
- Supporting work: Rack plus 204 lb published mounting mass and other roof equipment must fit the vehicle and rack limits. Check rail spacing, mounting access, hatch/sunroof/antenna clearance and final vehicle height. Manufacturer manual calls for at least four people when lifting into place; use a professional lifting arrangement. Sleeping capacity is not vehicle roof approval.

## Prerequisites

- Selected product / listed contents (included): Tent with supplied mounting rails/plates and telescopic ladder; confirm full current packing list. Vehicle rack, LC250 brackets and protected 12 V circuit are separate.
- Approved tent rack and mounting (check): A compatible rack and correctly spaced mounting arrangement are required; vehicle and rack capacity must support the full driving/parked load case.
- Vehicle roof capacity and rack approval (quote): Confirm combined rack/tent/awning mass against Toyota and rack driving limits, plus the occupied parked case. Do not infer approval from tent strength or sleeping capacity.
- Mount spacing, lifting and clearances (check): Use the exact mounting-channel drawing and supplied instructions. Confirm bolt access, lifting resources, hatch/antenna clearance and measured finished height.
- Optional tent power (conditional): If connecting the internal power system, quote correctly fused/protected 12 V wiring and a suitable vehicle supply; a tent is not a complete electrical installation.
- Installation / compatibility notes (check): Rack plus 204 lb published mounting mass and other roof equipment must fit the vehicle and rack limits. Check rail spacing, mounting access, hatch/sunroof/antenna clearance and final vehicle height. Manufacturer manual calls for at least four people when lifting into place; use a professional lifting arrangement. Sleeping capacity is not vehicle roof approval.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [23ZERO USA](https://23zero.com/product/kabari-z-aluminum-z-lift-clamshell-rooftop-tent/): $4,495.00
- [Overland Kitted](https://overlandkitted.com/products/kabari-z-hardshell-tent): $4,495.00

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [Kabari Z user and roof-rack installation manual](https://23zero.com/wp-content/uploads/2026/06/Kabari-Z-RTT_User-Manual.pdf): official; Exact Kabari Z tent; not LC250 rack approval. Mounting channels, supplied hardware, lifting, ladder and setup. Follow the current supplied revision and obtain vehicle/rack approval.

## All documented options

- [Kabari Z / 2 adults](https://configmyrig.com/products/23zero-kabari-z-aluminum-z-lift-rooftop-tent): 230HSKABZ; $4,495.00 USD / selected configuration; 204 lb product mass

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/roof-loads-and-camping)
- [23ZERO](https://configmyrig.com/brands/23zero)
- [Roof & camping](https://configmyrig.com/categories/roof-and-camping)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.

