# BamBeds BamBeds LC250 BamBed sleeping platform Canonical page: https://configmyrig.com/products/bambeds-lc250-bambed-sleeping-platform Removable raised sleeping platform with storage underneath, supported by its own legs and the folded second row. ## Selected configuration - Part/component: S950H - Configuration: Non-Slip Hex Baltic Birch / No headboard - Listed parts: $1,249.00 USD / selected configuration - Source checked: October 31, 2026 - Fitment: Manufacturer lists 2024+ Toyota Land Cruiser 250. Confirm exact US 1958 / Land Cruiser / 2024 First Edition cargo trim, factory floor and second-row layout with BamBeds; not an 80 Series or GX550 product. - Product mass: Product weight unverified - Net vehicle addition: Net addition unverified - Weight basis: Installed product mass and net vehicle addition are unverified. Shopify shipping-weight fields are not used as installed weight; confirm complete selected material/headboard mass with BamBeds. Do not assume zero load. - Professional install: 0.5–1 hr; researched planning estimate - Basis: 0.5–1 hr researched professional planning estimate for unpacking, arranging the no-tool panels/supports, checking factory cargo/seat clearances, setup and removal demonstration. Based on manufacturer setup scope and installation guide. Manufacturer says setup in minutes but publishes no numeric professional labor hours; this is an allowance, not a measured LC250 average. Mattress, tie-down design and any custom work are extra. - Contents: Vehicle-specific platform boards, support legs and stiffeners; headboard extension not included. - Critical specifications: Non-Slip Hex Baltic Birch; 3/4-inch Baltic birch platform; sleeping length 74 in without headboard; 11.2 in under-platform clearance from cargo floor; 41.2 in between rails (not overall width); maker lists 23 in platform-to-roof headroom and 1,000 lb platform rating. Confirm load distribution; rating does not raise vehicle payload. - Supporting work: No tools/drilling per manufacturer: stand legs upright, insert stiffeners, place boards. Retain the folded second row that supports the bed; do not combine with seat deletes or another cargo platform without explicit approval. Optional headboard is a different configuration. ## Prerequisites - Selected product / listed contents (included): Vehicle-specific platform boards, support legs and stiffeners; headboard extension not included. - Cargo layout and second-row access (check): Check factory floor, hybrid service access, seats, hatch and restraints in the final arrangement. Keep passengers out of folded/deleted seating positions and never occupy the bed while driving. - Mattress and cargo restraint (quote): Mattress and an approved restraint plan are separate. BamBeds recommends Luno AIR Pro TOY1-LNO-003-R3; verify exact shape and your sleeping length. Removable/no-drill setup does not itself establish crash restraint. - Installation / compatibility notes (check): No tools/drilling per manufacturer: stand legs upright, insert stiffeners, place boards. Retain the folded second row that supports the bed; do not combine with seat deletes or another cargo platform without explicit approval. Optional headboard is a different configuration. - Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load. ## Seller offers (selected configuration, low to high) - [BamBeds](https://bambeds.com/products/bambed-landcruiser-250-2024?variant=50358119563478): $1,249.00 Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred. ## Installation resources - [BamBeds LC250 BamBed sleeping platform setup and specification notes](https://bambeds.com/products/bambed-landcruiser-250-2024): official; Exact LC250 product setup notes; not a complete mounting/restraint manual. Manufacturer no-tool setup scope. Follow the current supplied instructions and exact product video; professional labor time and installed mass remain unconfirmed. - [BamBeds · LandCruiser 250 BamBed installation video](https://www.youtube.com/watch?v=bceMeBS8_b0): official; Manufacturer installation hub embeds this exact LC250 product video. Official vendor-linked installation video under the exact product heading. YouTube retrieval was throttled; uploader metadata and complete playback were not independently verified. It is not an LC250 restraint certification. ## All documented options - [Birch / No headboard](https://configmyrig.com/products/bambeds-lc250-bambed-sleeping-platform?variant=acc-bambeds-lc250-bed-birch): S950_1x222_1x223_1x224; $949.00 USD / selected configuration; Product weight unverified - [Birch / With headboard](https://configmyrig.com/products/bambeds-lc250-bambed-sleeping-platform?variant=acc-bambeds-lc250-bed-birch-headboard): S951_1x222_1x223_1x224_1x225_2x226; $1,149.00 USD / selected configuration; Product weight unverified - [Non-Slip Hex Baltic Birch / No headboard](https://configmyrig.com/products/bambeds-lc250-bambed-sleeping-platform?variant=acc-bambeds-lc250-bed-hex): S950H; $1,249.00 USD / selected configuration; Product weight unverified - [Non-Slip Hex Baltic Birch / With headboard](https://configmyrig.com/products/bambeds-lc250-bambed-sleeping-platform?variant=acc-bambeds-lc250-bed-hex-headboard): S951H; $1,449.00 USD / selected configuration; Product weight unverified ## Owner evidence No sufficiently matched report added. No review rating is inferred. ## Related guidance - [Planning guide](https://configmyrig.com/guides/interior-storage-and-power) - [BamBeds](https://configmyrig.com/brands/bambeds) - [Interior & cargo](https://configmyrig.com/categories/interior-and-cargo) AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.