# DuroBumps DuroBumps LC250 front bump stops

Canonical page: https://configmyrig.com/products/durobumps-lc250-front-bump-stops

Two front bump stops for the rear position above the lower control arms; retain forward OEM stops.

## Selected configuration

- Part/component: DBF17T
- Configuration: Front pair / DBF17T
- Listed parts: $205.99 USD / selected configuration
- Source checked: November 4, 2026
- Fitment: Manufacturer explicitly lists 2024+ Land Cruiser 250. Confirm exact US 1958 / Land Cruiser / 2024 First Edition and installed shock/tire/control-arm clearance; no payload or automatic 35-inch clearance approval.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Published 1.06 lb per set does not explicitly establish all-hardware gross assembly mass or net added mass after OEM removal. Commerce/shipping weight excluded.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Researched professional estimate: 0.5–1 hour for secure lift/support, front wheel removal, OEM rear-position stop removal, cleaning, fitting, wheel torque and clearance checks using the exact maker PDF. Corrosion, broken studs and extended articulation work extra. No exact manufacturer professional hours published.
- Contents: Two front bump stops, two supplied flange bolts and fitting instructions. Page lists 30mm bolts while PDF lists 35mm; verify current packing list/thread engagement with DuroBumps before fitting.
- Critical specifications: DBF17T; each 2.5-inch diameter × 1.75-inch tall. Dual-durometer rubber. Maker set weight 17 oz / 1.06 lb; 0.3-inch deflection at 1,500 lb is a compression figure, not a payload rating.
- Supporting work: Front bump stops cushion end-of-travel compression; they do not replace correct load-rated springs or increase payload capacity.

## Prerequisites

- Selected product / listed contents (included): Two front bump stops, two supplied flange bolts and fitting instructions. Page lists 30mm bolts while PDF lists 35mm; verify current packing list/thread engagement with DuroBumps before fitting.
- Correct front axle mounting position (check): Install at the rear bump-stop position on each front lower control arm; retain the forward OEM stop. Verify full compression/shock travel, coil/tire clearance and any existing extensions with installer. This is a front pair, not the rear axle DBRTOY family.
- Hardware and complete installed mass (quote): Page30mm vs PDF35mm bolt-length conflict needs maker confirmation. Weigh the complete supplied assembly and factory stops removed; no increase in axle/payload limits.
- Installation / compatibility notes (check): Front bump stops cushion end-of-travel compression; they do not replace correct load-rated springs or increase payload capacity.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [DuroBumps](https://durobumps.com/products/dbf17t?variant=42361113149482): $205.99

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [DBF17T manufacturer fitting and user guide](https://durobumps.com/cdn/shop/files/Front_Bump_Stops_DBF2T_DBF17T.pdf?v=16076436122754924031): official; Exact selected product or explicitly covered DBF17T shared front-stop guide. Exact PDF retrieved and visually checked. Page/PDF bolt-length conflict must be confirmed. No exact manufacturer professional hours verified.

## All documented options

- [Front pair / DBF17T](https://configmyrig.com/products/durobumps-lc250-front-bump-stops): DBF17T; $205.99 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load)
- [DuroBumps](https://configmyrig.com/brands/durobumps)
- [Suspension](https://configmyrig.com/categories/suspension)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.