# DuroBumps DuroBumps LC250 rear bump stops

Canonical page: https://configmyrig.com/products/durobumps-lc250-rear-bump-stops

2-inch extended / 4-inch tall rear pair. Extended stop: compression-travel verification required.

## Selected configuration

- Part/component: DBRTOY4
- Configuration: 2-inch extended / 4-inch tall
- Listed parts: $249.99 USD / selected configuration
- Source checked: November 4, 2026
- Fitment: Manufacturer explicitly lists 2024+ Land Cruiser 250. Confirm exact US 1958 / Land Cruiser / 2024 First Edition trim, rear axle, shocks and existing modifications. 2-inch extended relative to LC250 OEM-equivalent. Maker lists at least 2-inch lift for DBRTOY4. Lift height alone does not establish safe travel or fitment.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Manufacturer lists 3.13 lb per set (bump-stop product specification); inclusion of every plate/fastener is not explicit. Complete assembly gross mass and net installed change after removing OEM stops remain unverified. Commerce weight excluded.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Researched professional task estimate of 0.5–1 hour for rear pair: secure lift/support, remove rear wheels and OEM stops, clean contact surfaces, assemble plates/stops, fit hardware, refit/torque wheels and check clearance. Based on exact manufacturer PDF; corrosion, extra spacers and full articulation measurement may add labor. No exact professional manufacturer hours published.
- Contents: Two rear bump stops, two standard mounting plates, hardware pack, instructions and sticker; verify current exact-SKU packing list.
- Critical specifications: DBRTOY4; dual-durometer rubber; each 2 × 2.75 × 4 inches. Maker deflection specification 0.75 inch at 1,500 lb is a product compression figure, not vehicle payload capacity.
- Supporting work: A bump stop cushions the end of compression travel. An extended stop engages earlier; it is not a spring upgrade and does not add payload capacity.

## Prerequisites

- Selected product / listed contents (included): Two rear bump stops, two standard mounting plates, hardware pack, instructions and sticker; verify current exact-SKU packing list.
- Compression travel, shocks and clearance (check): Installer must cycle rear suspension and verify compressed shock length, spring binding/retention, tire-to-body clearance, brake hoses and bump-stop engagement. Longer stops reduce available up-travel; do not choose from tire diameter or lift alone. Existing stop extensions/track-bar brackets require separate clearance checks.
- Payload and spring selection (check): Bump stops do not increase GVWR, GAWR, roof limits or spring constant-load rating. Choose appropriate springs separately using actual finished vehicle loads.
- Complete installed weight (quote): Published set figure 3.13 lb does not confirm hardware inclusion or OEM mass removed. Obtain complete assembly weights before finalizing the build load budget.
- Installation / compatibility notes (check): A bump stop cushions the end of compression travel. An extended stop engages earlier; it is not a spring upgrade and does not add payload capacity.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [DuroBumps](https://durobumps.com/products/dbrtoy4?variant=42377347924010): $249.99

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [DuroBumps DBRTOY2 / DBRTOY3 / DBRTOY4 rear fitting instructions](https://durobumps.com/cdn/shop/files/Rear_Bump_Stops_DBRTOY2_DBRTOY3_DBRTOY4_DBRTOY5.pdf?v=17211493788781705252): official; Exact DBRTOY rear-series hardware procedure; LC250 stop length still requires vehicle travel checks. Exact manufacturer PDF retrieved. Remove rear wheels and OEM stops, assemble mounting plates, refit and torque wheels to vehicle specification. No official installation video or exact professional hours verified.

## All documented options

- [OEM-equivalent / 2-inch tall](https://configmyrig.com/products/durobumps-lc250-rear-bump-stops?variant=acc-duro-dbrtoy2): DBRTOY2; $229.99 USD / selected configuration; Product weight unverified
- [1-inch extended / 3-inch tall](https://configmyrig.com/products/durobumps-lc250-rear-bump-stops?variant=acc-duro-dbrtoy3): DBRTOY3; $239.99 USD / selected configuration; Product weight unverified
- [2-inch extended / 4-inch tall](https://configmyrig.com/products/durobumps-lc250-rear-bump-stops?variant=acc-duro-dbrtoy4): DBRTOY4; $249.99 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load)
- [DuroBumps](https://configmyrig.com/brands/durobumps)
- [Suspension](https://configmyrig.com/categories/suspension)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.