# FOX 2.5 Performance HD · shock package

Canonical page: https://configmyrig.com/products/fox-2-5-performance-hd-shock-package

Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs

## Selected configuration

- Part/component: 987-02-016 ×2 / 987-24-059 ×2
- Configuration: Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs
- Listed parts: $2,339.80 USD / selected configuration
- Source checked: October 25, 2026 · original catalog snapshot
- Fitment: 2024–2026 LC250 · confirm exact vehicle
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Installed net change requires all mounting hardware and factory parts removed; shipping mass is not installed mass.
- Professional install: 4–6 hr; researched planning estimate
- Basis: Researched 4–6 hour professional planning range for two loaded front coilovers and two rear shocks. Comparable ICON front-coilover instructions publish 3 hours; rear shock replacement and setup complete this estimate. No FOX whole-package time was verified. Rear spring changes, arms, alignment and calibration are additional.
- Contents: Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs
- Critical specifications: Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs
- Supporting work: Seller lists aftermarket UCAs as required for body clearance; obtain the compatible arm quote. Rear shocks fit 0–2 inches of rear lift, but rear lift springs are not supplied. Confirm all geometry at the chosen height.

## Prerequisites

- Listed suspension components (included): Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs
- Front / rear spring choice and final load (check): Confirm spring ratings for the finished build, expected ride height and actual constant load.
- Suitable rear springs (check): Rear springs are not included. Confirm that the retained factory springs suit the final load and height, or obtain a quote for matched replacement springs.
- Alignment (quote): Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance.
- Control arms / correction hardware (conditional): Seller lists aftermarket UCAs as required for body clearance; obtain the compatible arm quote. Rear shocks fit 0–2 inches of rear lift, but rear lift springs are not supplied. Confirm all geometry at the chosen height.

## Seller offers (selected configuration, low to high)

- [Shock Surplus](https://www.shocksurplus.com/products/fox-2-5-performance-series-coilovers-rear-shocks-set-for-2024-2026-toyota-land-cruiser-250-4wd-rwd-w-0-2-25-lift-hd-tune): $2,339.80 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [FOX direct-replacement shock installation guidance](https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/605_01_053_REV_C.pdf): official; General manufacturer reference · not an exact LC250 HD instruction set. FOX links this generic five-page document from the 987-02-016 HD page. It does not identify all listed HD package components; request exact installation sheets before work.

## All documented options

- [Two 987-02-016 loaded front coilovers and two 987-24-059 rear shocks; no rear springs or UCAs](https://configmyrig.com/products/fox-2-5-performance-hd-shock-package): 987-02-016 ×2 / 987-24-059 ×2; $2,339.80 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load)
- [FOX](https://configmyrig.com/brands/fox)
- [Suspension](https://configmyrig.com/categories/suspension)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.