# Overland Tourers Australia OTA Prado 250 A-pillar switch panel

Canonical page: https://configmyrig.com/products/overland-tourers-australia-ota-prado-250-a-pillar-switch-panel

US fitment unconfirmed · Australian RHD-side grab-handle panel with four Toyota-style short-switch positions.

## Selected configuration

- Part/component: ORHSP-250010
- Configuration: Australian right-hand-side grab-handle mount
- Listed parts: $186.56 USD / selected configuration · USD planning conversion; seller charges AUD
- Price basis: USD planning conversion only. Seller lists A$265.00 AUD; 1 AUD = US$0.7040, RBA 2026-10-30. Checkout FX, bank fees, international freight, import charges, tax/GST treatment and supporting parts require a quote.
- Source checked: October 31, 2026 (America/Los_Angeles)
- Fitment: Australian Prado 250 listing; US LC250 1958 / Land Cruiser / 2024 First Edition fitment and US delivery are unverified. Obtain supplier approval for the exact VIN, trim and mounting geometry before ordering.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Product mass and removed handle/trim mass are unpublished; gross and net installed weights remain unknown.
- Professional install: 0.5–1.5 hr; researched planning estimate
- Basis: Task-based professional planning estimate from the 11-step supplier guide: remove handle/trim, place brackets, provision the wiring exit, fit panel and perform checks. No published professional hours located. Accessory circuit wiring, SRS-specific procedures and commissioning require a separate quote.
- Contents: Panel, two brackets and two M5 bolts per the linked guide; reuses OEM grab-handle bolts. Four switches and accessory circuit wiring are separate.
- Critical specifications: Four STEDI/Toyota-style short square-switch openings; factory grab-handle bolt locations. Supplier lists ASA plastic but also describes SLA black resin; exact material requires confirmation.
- Supporting work: Australian driver-side means the right-hand A-pillar; no left-hand US driver-side version is documented. Confirm handle/trim geometry and Toyota SRS/curtain-airbag clearance. Mounting uses factory bolts, but the guide calls for drilling a trim wiring hole: do not describe the fully wired job as no-drill.

## Prerequisites

- Selected product / listed contents (included): Panel, two brackets and two M5 bolts per the linked guide; reuses OEM grab-handle bolts. Four switches and accessory circuit wiring are separate.
- US-market fitment and international delivery (quote): Australian Prado 250 listing; US LC250 1958 / Land Cruiser / 2024 First Edition fitment and US delivery are unverified. Obtain supplier approval for the exact VIN, trim and mounting geometry before ordering.
- AUD seller price / complete landed cost (quote): USD planning conversion only. Seller lists A$265.00 AUD; 1 AUD = US$0.7040, RBA 2026-10-30. Checkout FX, bank fees, international freight, import charges, tax/GST treatment and supporting parts require a quote.
- Switches, circuits and SRS clearance (quote): Order matching short Toyota/STEDI switches and a protected harness/controller. Have the installer approve airbag deployment clearance and the trim wiring hole before purchase.
- Installation / compatibility notes (check): Australian driver-side means the right-hand A-pillar; no left-hand US driver-side version is documented. Confirm handle/trim geometry and Toyota SRS/curtain-airbag clearance. Mounting uses factory bolts, but the guide calls for drilling a trim wiring hole: do not describe the fully wired job as no-drill.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [Mick Tighe 4x4 & Outdoor](https://www.micktighe4x4.com.au/products/250-prado-switch-panel?variant=51023444967670): A$265.00 AUD · approx US$186.56

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [OTA 300 Series / Prado 250 A-pillar panel instructions](https://knowby.show/164d331e-9f11-41c2-a38d-227c778acb21): official; Supplier-linked Australian Prado procedure; US application unconfirmed. Shared supplier guide; trim wiring hole required despite no-drill mounting copy. Exact US mounting side and SRS clearance unverified.

## All documented options

- [Australian right-hand-side grab-handle mount](https://configmyrig.com/products/overland-tourers-australia-ota-prado-250-a-pillar-switch-panel): ORHSP-250010; $186.56 USD / selected configuration · USD planning conversion; seller charges AUD; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/electrical-system-planning)
- [Overland Tourers Australia](https://configmyrig.com/brands/overland-tourers-australia)
- [Power & electrical](https://configmyrig.com/categories/power-and-electrical)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.