# Rago Fabrication Rago LC250 A-pillar light mounts

Canonical page: https://configmyrig.com/products/rago-lc250-a-pillar-light-mounts

Low-profile, adjustable-angle A-pillar light brackets sold as a pair. Cowl/plastic drilling, trimming and rivet nuts required.

## Selected configuration

- Part/component: AC7707701NA
- Configuration: Pair / hammer black
- Listed parts: $59.99 USD / selected configuration
- Source checked: November 2, 2026
- Fitment: Manufacturer lists 2024+ Toyota Land Cruiser. For US LC250 1958 / Land Cruiser / 2024 First Edition, confirm cowl/trim configuration, chosen pod and all vehicle clearances. No GX550 compatibility inferred.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Complete assembly gross mass and net installed vehicle addition are unverified. Commerce/shipping weights are not used as installed mass. Include fasteners, added equipment and any removed factory parts when calculating loads.
- Professional install: 1 hr; published
- Basis: Manufacturer installation expectation: approximately 1 hour. Exact guide visually reviewed, including cover and cowl drilling/rivet-nut steps; PDF has legacy hidden template text.
- Contents: Pair of light mounts with fitting-guide hardware, spacers and rivet nuts; confirm current packing list. Lights and wiring/harness/switches separate.
- Critical specifications: SKU AC7707701NA; each mount accepts up to one 6-inch pod. Adjustable forward/side angle, integrated wire management and two-stage hammer black powder coat. Full dimensions and assembly mass unverified.
- Supporting work: A ditch-light bracket holds a lamp near the windshield corner to illuminate the trail edge. These mounts require cowl alterations; they are not a no-drill hood-hinge bracket.

## Prerequisites

- Selected product / listed contents (included): Pair of light mounts with fitting-guide hardware, spacers and rivet nuts; confirm current packing list. Lights and wiring/harness/switches separate.
- Compatible pod lights and protected wiring (check): One pod up to 6 inches per mount; verify mounting-hole spacing and lamp envelope. Fused harness, switching and suitable electrical supply separate.
- Drilling, trimming and wiper clearance (check): Exact guide requires drilling/trimming cowl plastic, rivet nuts and test positioning. Cycle wipers and confirm light clearance before drilling; verify guide dimensions against the actual vehicle and ask Rago about unclear measurements. Retailer no-drill claims conflict with the manufacturer guide.
- Installed mass and combined light load (quote): Complete bracket mass is unpublished; add both pods, harness and hardware. Confirm allowable pod mass and mounting loads with Rago.
- Installation / compatibility notes (check): A ditch-light bracket holds a lamp near the windshield corner to illuminate the trail edge. These mounts require cowl alterations; they are not a no-drill hood-hinge bracket.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [Rago Fabrication](https://www.ragofabrication.com/products/land-cruiser-250-series-a-pillar-mounts?variant=50524455731507): $59.99

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [Rago Fabrication AC7707701NA A-pillar mounts installation guide](https://www.ragofabrication.com/cdn/shop/files/Rago_InstallGuide_AC7707701NA.pdf?v=362292763478652420): official; Exact listed SKUs; vehicle-specific custom mounting scope as noted. Exact AC7707701NA guide visually reviewed: approximately 1 hour, cowl drilling/trimming, rivet nuts and wiper clearance. Hidden PDF legacy template text is not the visible title. Verify actual measurements before drilling; no official installation video verified.

## All documented options

- [Pair / hammer black](https://configmyrig.com/products/rago-lc250-a-pillar-light-mounts): AC7707701NA; $59.99 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/planning-your-lc250-build)
- [Rago Fabrication](https://configmyrig.com/brands/rago-fabrication)
- [Lighting](https://configmyrig.com/categories/lighting)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.