# RIGd Supply RIGd HitchingPost Tire Mount

Canonical page: https://configmyrig.com/products/rigd-hitchingpost-tire-mount

Spare wheel mount for a separate compatible HitchingPost.

## Selected configuration

- Part/component: HTCH-PST-MF
- Configuration: Default Title
- Listed parts: $199.95 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: Tire mount only. Post, swing arm, wheel/tire and plate lighting extra.
- Critical specifications: Supports 4/5/6/8-lug mounting; centered-post optimized 35 in, offset-post optimized 37 in. Exact bolt circle / wheel profile and complete stack rating require confirmation.
- Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Already included in RambleSwing spare-carrier bundle; not an UltraSwing replacement wheel plate.

## Prerequisites

- Selected product / listed contents (included): Tire mount only. Post, swing arm, wheel/tire and plate lighting extra.
- Compatible HitchingPost on RambleSwing Pro (check): Requires a documented centered/offset HitchingPost and approved hardware.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Already included in RambleSwing spare-carrier bundle; not an UltraSwing replacement wheel plate.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/hitching-post-tire-mount?variant=46931164168412): $199.95 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [RambleSwing Pro Tire Carrier INSTALLATION GUIDE](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_Tire_Carrier_INSTALLATION_GUIDE.pdf?v=1792431462): official; Component / platform reference · not complete LC250 approval. Covers base arm, post and spare-mount steps; separate mount listing is only one component. Verify exact post geometry and rating.
- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.
- [UltraSwing®  and RambleSwing® Pro wheel plate setup](https://www.youtube.com/watch?v=fqg1wWW0its): official; Component / platform reference · not complete LC250 approval. Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance.

## All documented options

- [Default Title](https://configmyrig.com/products/rigd-hitchingpost-tire-mount): HTCH-PST-MF; $199.95 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/planning-your-lc250-build)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Exterior & protection](https://configmyrig.com/categories/exterior-and-protection)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.