# RIGd Supply RIGd JerryRig fuel / water mount

Canonical page: https://configmyrig.com/products/rigd-jerryrig-fuel-water-mount

Lockable jerry-can cradle with different upper straps for fuel and water cans.

## Selected configuration

- Part/component: JR-W
- Configuration: Water
- Listed parts: $174.95 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: 10 lb product mass
- Net vehicle addition: Net addition unverified
- Weight basis: Manufacturer lists 10 lb reference cradle product mass; selected strap/hardware scope and total installed addition unverified. Both Straps mass is not inferred.
- Professional install: 0.25–0.75 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra.
- Critical specifications: 10 lb published cradle reference; Both Straps exact mass unverified. Scepter/Wavian/LifeSaver/Midwest listed; Wavian nozzle removal required.
- Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself.

## Prerequisites

- Selected product / listed contents (included): Cradle + selected upper strap(s). Container, padlock (up to 3/8-inch shank), SideHack and swing arm extra.
- SideHack (check): Requires SideHack on UltraSwing.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. SideHack required. Fuel/water strap shapes differ; this is a mount, not added fuel capacity by itself.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/sidehack-jerry-can-mount?variant=43334249185500): $174.95 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.

## All documented options

- [Fuel](https://configmyrig.com/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-0): JR-F; $174.95 USD / selected configuration; 10 lb product mass
- [Water](https://configmyrig.com/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-1): JR-W; $174.95 USD / selected configuration; 10 lb product mass
- [Both fuel and water straps · one cradle](https://configmyrig.com/products/rigd-jerryrig-fuel-water-mount?variant=acc-rigd-jerryrig-2): JR-FW; $224.95 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Fuel & range](https://configmyrig.com/categories/fuel-and-range)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.