# RIGd Supply RIGd MegaTable

Canonical page: https://configmyrig.com/products/rigd-megatable

Larger drop-down work surface for camp cooking.

## Selected configuration

- Part/component: RPMT2145
- Configuration: RambleSwing Pro / HitchingPost bracket
- Listed parts: $399.95 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: 24.875 lb product mass
- Net vehicle addition: Net addition unverified
- Weight basis: Manufacturer product mass 24.875 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra.
- Critical specifications: Surface 34.25 × 16.25 in; closed 35 × 18 5/16 × 3.5 in; 125 lb static rating subject to support.
- Supporting work: RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.

## Prerequisites

- Selected product / listed contents (included): MegaTable + platform-specific NoNuts bracket. UtiliCaddy/stove and post extra.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- RambleSwing Pro platform (check): Requires RambleSwing Pro, not UltraSwing.
- HitchingPost foundation (check): RambleSwing table version needs a compatible HitchingPost; the spare-carrier bundle includes an offset post.
- Installation / compatibility notes (check): RambleSwing Pro / HitchingPost version only. All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/rambleswing-pro-megatable?variant=46479940387036): $399.95 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.

## All documented options

- [UltraSwing bracket](https://configmyrig.com/products/rigd-megatable?variant=acc-rigd-megatable-us): MT2145; $399.95 USD / selected configuration; 25.5 lb product mass
- [RambleSwing Pro / HitchingPost bracket](https://configmyrig.com/products/rigd-megatable?variant=acc-rigd-megatable-rp): RPMT2145; $399.95 USD / selected configuration; 24.875 lb product mass

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/roof-loads-and-camping)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Roof & camping](https://configmyrig.com/categories/roof-and-camping)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.