# RIGd Supply RIGd RambleRack Add-On

Canonical page: https://configmyrig.com/products/rigd-ramblerack-add-on

Additional bike tray for an existing compatible RambleRack.

## Selected configuration

- Part/component: RMBL-RCK-T-2
- Configuration: RambleRack Add-on
- Listed parts: $699.00 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: One add-on assembly; base rack, bikes and locks extra.
- Critical specifications: Add-on tray; complete installed mass unverified; exact rack revision and total loaded capacity require confirmation.
- Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not add this to a complete two-bike package unless RIGd approves the resulting configuration.

## Prerequisites

- Selected product / listed contents (included): One add-on assembly; base rack, bikes and locks extra.
- Existing compatible RambleRack (check): Requires a compatible base rack and approved add-on hardware; two-bike package already includes two trays.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not add this to a complete two-bike package unless RIGd approves the resulting configuration.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/ramblerack-t?variant=43342010941660): $699.00 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [RambleRack strap guide](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleRack_strap_guide.pdf?v=1658343777): official; Component / platform reference · not complete LC250 approval. Rear retention-strap subtask only; use full assembly video and supplied rack revision instructions.
- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.
- [Rig'd Supply RambleRack Install (2026)](https://www.youtube.com/watch?v=21aKhAnzAvA): official; Component / platform reference · not complete LC250 approval. Official 2026 rack assembly family reference. Specific add-on, stinger and channel hardware details may not all be covered.

## All documented options

- [RambleRack Add-on](https://configmyrig.com/products/rigd-ramblerack-add-on): RMBL-RCK-T-2; $699.00 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/planning-your-lc250-build)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Exterior & protection](https://configmyrig.com/categories/exterior-and-protection)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.