# RIGd Supply RIGd RambleSwing Pro 1/2-inch locking pin

Canonical page: https://configmyrig.com/products/rigd-rambleswing-pro-1-2-inch-locking-pin

Locking retention pin for the non-towing RambleSwing Pro.

## Selected configuration

- Part/component: 61068-D
- Configuration: USA Made Locking Standard Length 2" & 2.5"
- Listed parts: $42.45 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.
- Professional install: 0.1–0.25 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: Selected lock/pin and keys. Carrier extra.
- Critical specifications: 1/2-inch diameter; standard / long 3-7/8-inch listed span; confirm LC250 receiver width.
- Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated.

## Prerequisites

- Selected product / listed contents (included): Selected lock/pin and keys. Carrier extra.
- RambleSwing Pro (check): For RambleSwing Pro; confirm span.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Not the 5/8-inch UltraSwing / RambleRack retention pin; RambleSwing Pro is not tow-rated.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/rambleswing-locking-hitch-pin-1-2?variant=46803690782940): $42.45 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.

## All documented options

- [USA Made Locking Standard Length 2" & 2.5"](https://configmyrig.com/products/rigd-rambleswing-pro-1-2-inch-locking-pin?variant=acc-rigd-pin12-0): 61068-D; $42.45 USD / selected configuration; Product weight unverified
- [USA Made Locking Long Length 3 7/8" (2024+ Toyota Tacoma & F350)](https://configmyrig.com/products/rigd-rambleswing-pro-1-2-inch-locking-pin?variant=acc-rigd-pin12-1): 61090-D; $45.95 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/planning-your-lc250-build)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Exterior & protection](https://configmyrig.com/categories/exterior-and-protection)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.