# RIGd Supply RIGd RambleSwing Pro HitchingPost

Canonical page: https://configmyrig.com/products/rigd-rambleswing-pro-hitchingpost

Vertical accessory post for RambleSwing Pro.

## Selected configuration

- Part/component: HTCH-PST
- Configuration: Centered post · base accessory foundation
- Listed parts: $199.95 USD / selected configuration
- Source checked: October 29, 2026 (America/New_York)
- Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval.
- Product mass: Product weight unverified
- Net vehicle addition: Net addition unverified
- Weight basis: Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass.
- Professional install: 0.5–1 hr; researched planning estimate
- Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra.
- Contents: HitchingPost only as currently described. Wings, table, spare mount and lighting separate unless explicitly confirmed.
- Critical specifications: RambleSwing Pro only; exact current post capacity / mass require RIGd confirmation.
- Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Legacy URL mentions a light kit, but current contents do not confirm one. Base and offset/bundle post load ratings conflict across pages: do not assume 120 lb applies to every post.

## Prerequisites

- Selected product / listed contents (included): HitchingPost only as currently described. Wings, table, spare mount and lighting separate unless explicitly confirmed.
- RambleSwing Pro platform (check): Requires RambleSwing Pro, not UltraSwing. Spare-carrier bundle already includes offset post.
- Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open.
- Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Legacy URL mentions a light kit, but current contents do not confirm one. Base and offset/bundle post load ratings conflict across pages: do not assume 120 lb applies to every post.
- Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

## Seller offers (selected configuration, low to high)

- [RIGd Supply](https://www.rigdsupply.com/products/hitching-post-includes-license-plate-light-kit?variant=46459137327324): $199.95 USD

Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred.

## Installation resources

- [Hitching Post Install Assy 7-30-25](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345): official; Component / platform reference · not complete LC250 approval. Centered-post drawing / hardware reference; offset post and revised hardware need confirmation.
- [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd.
- [Hitching Post Install Video](https://www.youtube.com/watch?v=QLlCJWtmEyo): official; Component / platform reference · not complete LC250 approval. Official post installation; confirm centered / offset geometry and hardware revision.

## All documented options

- [Centered post · base accessory foundation](https://configmyrig.com/products/rigd-rambleswing-pro-hitchingpost?variant=acc-rigd-hitchingpost): HTCH-PST; $199.95 USD / selected configuration; Product weight unverified
- [Off-Set post · confirm stack capacity / contents](https://configmyrig.com/products/rigd-rambleswing-pro-hitchingpost?variant=acc-rigd-hitchingpost-offset): HTCH-PST-ST; $149.95 USD / selected configuration; Product weight unverified

## Owner evidence

No sufficiently matched report added. No review rating is inferred.

## Related guidance

- [Planning guide](https://configmyrig.com/guides/planning-your-lc250-build)
- [RIGd Supply](https://configmyrig.com/brands/rigd-supply)
- [Exterior & protection](https://configmyrig.com/categories/exterior-and-protection)

AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.