# RIGd Supply RIGd RambleSwing Pro Canonical page: https://configmyrig.com/products/rigd-rambleswing-pro Reversible swing-out platform for a separately purchased rack or cargo accessory. ## Selected configuration - Part/component: RMBL-SWNGPRO-SHRT - Configuration: 2-inch Short-Fit · base platform - Listed parts: $949.00 USD / selected configuration - Source checked: October 29, 2026 (America/New_York) - Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval. - Product mass: 74 lb product mass - Net vehicle addition: Net addition unverified - Weight basis: Manufacturer product mass 74 lb; shipping mass is not used. Mounting hardware scope and total installed net addition are unconfirmed. - Professional install: 1–2 hr; researched planning estimate - Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra. - Contents: Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate. - Critical specifications: 2-inch Short-Fit or adjustable Mid-Fit; 350 lb swing-arm limit; no towing; manufacturer 74 lb base unit. Vertical bike limit 150 lb bikes plus separate rack mass within total limit. - Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute. ## Prerequisites - Selected product / listed contents (included): Base swing arm only; HitchingPost, spare mount, racks, table and recommended 1/2-inch hitch pin separate. - Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. - Correct 1/2-inch retention pin (check): Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated. - Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Short-Fit is the newer-Toyota starting choice; Mid-Fit is a conditional alternative after measurements, not an automatic substitute. - Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load. ## Seller offers (selected configuration, low to high) - [RIGd Supply](https://www.rigdsupply.com/products/rambleswing-pro-1?variant=46459058421980): $949.00 USD Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred. ## Installation resources - [RambleSwing Pro INSTALLATION GUIDE](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461): official; Component / platform reference · not complete LC250 approval. Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate. - [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd. - [How to install the RambleSwing®Pro](https://www.youtube.com/watch?v=kWPUsC6OKa8): official; Component / platform reference · not complete LC250 approval. Official base platform installation; complete spare bundle still needs post and wheel-plate steps. ## All documented options - [2-inch Short-Fit · base platform](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-3): RMBL-SWNGPRO-SHRT; $949.00 USD / selected configuration; 74 lb product mass - [2-inch Mid-Fit · base, verify dimensions](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-0): RMBL-SWNGPRO; $949.00 USD / selected configuration; 74 lb product mass - [2-inch Short-Fit · with post + spare mount](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-3): 39-018L; $1,299.00 USD / selected configuration; Product weight unverified - [2-inch Mid-Fit · with post + spare mount, verify dimensions](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-0): 39-028L; $1,299.00 USD / selected configuration; Product weight unverified ## Owner evidence No sufficiently matched report added. No review rating is inferred. ## Related guidance - [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load) - [RIGd Supply](https://configmyrig.com/brands/rigd-supply) - [Bumpers & recovery](https://configmyrig.com/categories/bumpers-and-recovery) AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.