# RIGd Supply RIGd RambleSwing Pro Canonical page: https://configmyrig.com/products/rigd-rambleswing-pro Complete manufacturer bundle adds an offset post and spare mount to RambleSwing Pro. ## Selected configuration - Part/component: 39-028L - Configuration: 2-inch Mid-Fit · with post + spare mount, verify dimensions - Listed parts: $1,299.00 USD / selected configuration - Source checked: October 29, 2026 (America/New_York) - Fitment: Universal hitch ecosystem, conditionally applicable to US 2024+ LC250 / 1958 / Land Cruiser / 2024 First Edition. No unconditional year/grade approval: confirm factory 2-inch receiver dimensions, insertion, pin span, bumper, hatch, sensors and chosen wheel with RIGd. Aftermarket integrated/high-clearance bumpers need explicit approval. - Product mass: Product weight unverified - Net vehicle addition: Net addition unverified - Weight basis: Exact selected product mass / installed net addition unverified. Shopify shipping-weight fields are not treated as component mass. - Professional install: 1.5–3 hr; researched planning estimate - Basis: Research-based professional planning allowance for the documented bolt-on assembly, mounting/alignment, clearance and retention checks. No published numeric LC250 manufacturer time located; this is a task-based estimate, not a measured average. Supporting fabrication, camera work, wiring and vehicle repairs extra. - Contents: RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra. - Critical specifications: 350 lb arm total; tire mount up to 150 lb; 74 lb figure is base arm only, NOT complete bundle mass. - Supporting work: All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing. ## Prerequisites - Selected product / listed contents (included): RambleSwing Pro + Off-Set HitchingPost + HitchingPost Tire Mount. Table, license-plate lighting, spare and hitch pin extra. - Completed installation and loaded clearance (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. - Correct 1/2-inch retention pin (check): Confirm an existing suitable pin or add the correct diameter/span; this platform is not tow-rated. - Installation / compatibility notes (check): All carrier/accessory/bike/fuel mass consumes vehicle payload and usable hitch capacity. Accessory ratings never raise Toyota limits. Rear leverage and relocating the existing spare change axle loads; do not count the existing spare as new mass. Verify cameras, plate/light visibility, exhaust, hatch and departure clearance loaded and swung open. Do not buy included post/mount again. Confirm actual wheel/35-inch tire dimensions, post capacity and selected mounting stack; no towing. - Installed net weight (check): Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load. ## Seller offers (selected configuration, low to high) - [RIGd Supply](https://www.rigdsupply.com/products/rambleswing%C2%AE-pro-tire-mount?variant=47373572702428): $1,299.00 USD Prices are dated snapshots; tax, shipping, installation and unlisted supporting equipment are extra. Availability is not inferred. ## Installation resources - [RambleSwing Pro INSTALLATION GUIDE](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_INSTALLATION_GUIDE.pdf?v=1792431461): official; Component / platform reference · not complete LC250 approval. Base arm assembly / retention instructions; no towing; exact vehicle geometry and accessories separate. - [RambleSwing Pro Tire Carrier INSTALLATION GUIDE](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/RambleSwing_Pro_Tire_Carrier_INSTALLATION_GUIDE.pdf?v=1792431462): official; Component / platform reference · not complete LC250 approval. Covers base arm, post and spare-mount steps; separate mount listing is only one component. Verify exact post geometry and rating. - [Hitching Post Install Assy 7-30-25](https://cdn.shopify.com/s/files/1/0030/8245/3065/files/Hitching_Post_Install_Assy_7-30-25.pdf?v=1755016345): official; Component / platform reference · not complete LC250 approval. Centered-post drawing / hardware reference; offset post and revised hardware need confirmation. - [RIGd installation library / remaining resource gaps](https://www.rigdsupply.com/pages/installguides): official; Component / platform reference · not complete LC250 approval. Official discovery/support library. A library link does not mean this specific component has a complete manual or video. Request missing instructions from RIGd. - [How to install the RambleSwing®Pro](https://www.youtube.com/watch?v=kWPUsC6OKa8): official; Component / platform reference · not complete LC250 approval. Official base platform installation; complete spare bundle still needs post and wheel-plate steps. - [Hitching Post Install Video](https://www.youtube.com/watch?v=QLlCJWtmEyo): official; Component / platform reference · not complete LC250 approval. Official post installation; confirm centered / offset geometry and hardware revision. - [UltraSwing® and RambleSwing® Pro wheel plate setup](https://www.youtube.com/watch?v=fqg1wWW0its): official; Component / platform reference · not complete LC250 approval. Official wheel-plate subtask for UltraSwing / RambleSwing; no-plate option needs additional hardware. Verify actual wheel pattern/clearance. ## All documented options - [2-inch Short-Fit · base platform](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-3): RMBL-SWNGPRO-SHRT; $949.00 USD / selected configuration; 74 lb product mass - [2-inch Mid-Fit · base, verify dimensions](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-0): RMBL-SWNGPRO; $949.00 USD / selected configuration; 74 lb product mass - [2-inch Short-Fit · with post + spare mount](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-3): 39-018L; $1,299.00 USD / selected configuration; Product weight unverified - [2-inch Mid-Fit · with post + spare mount, verify dimensions](https://configmyrig.com/products/rigd-rambleswing-pro?variant=acc-rigd-rambleswing-bundle-0): 39-028L; $1,299.00 USD / selected configuration; Product weight unverified ## Owner evidence No sufficiently matched report added. No review rating is inferred. ## Related guidance - [Planning guide](https://configmyrig.com/guides/suspension-and-constant-load) - [RIGd Supply](https://configmyrig.com/brands/rigd-supply) - [Bumpers & recovery](https://configmyrig.com/categories/bumpers-and-recovery) AI-assisted planning; exact vehicle/application and current supplier documentation require confirmation.