BP-51 · matched load system

Name: Old Man Emu BP-51 · matched load system — Front 0–330 lb added / Rear Stock load · 0 lb added
Brand: Old Man Emu
SKU: 2220K

Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits

PART / COMPONENT ID 2220K

LISTED PARTS / SELECTED CONFIGURATION$4,280.55

Source checked October 25, 2026 · original catalog snapshot. Tax, shipping, supporting parts and installation are additional.

Configure in my build ↗

PROFESSIONAL INSTALL6–8 hrPlanning estimate

WEIGHTProduct weight unverifiedNet addition unverified

THE SELECTED CONFIGURATION

Specifications & fitment

Manufacturer / component part: 2220K
Selected configuration: Front 0–330 lb added / Rear Stock load · 0 lb added
Vehicle fitment evidence: US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering.
Package contents: Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits
Critical specifications: Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits
Product mass: Product weight unverified
Net added vehicle weight: Net addition unverified
Weight basis: Factory components removed, mounts and hardware must be reconciled. Shipping mass is not substituted for installed mass.
Professional installation: 6–8 hr · researched planning estimate
Installation scope: Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.
Fitment / supporting work: Designed around constant accessory load. Confirm spring suitability before adding this to a lightly equipped rig.

Required equipment & checks

Planning requirements for this product. Your exact vehicle and complete build still need confirmation.

included

Listed suspension components

Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits

check

Front / rear spring choice and final load

Confirm spring ratings for the finished build, expected ride height and actual constant load.

Explore supporting equipment →

quote

Alignment

Obtain a professional alignment quote after installation. It is additional to the listed kit parts and installation allowance.

included

Upper control arms

Listed as included in this kit. Confirm the selected variant and packing list.

Where to buy

Same selected configuration, ordered by listed price. These are dated source snapshots, not live inventory or delivered quotes.

LOWEST LISTED OFFER

ARB USA

2220K

$4,280.55View supplier ↗

Installation instructions & videos

6–8 hr · researched professional planning estimate. Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.

Instructions & manuals

OFFICIAL MANUFACTURER / SUPPLIER · guide

Old Man Emu installation tips ↗

General OME suspension installation · not a complete LC250 kit manual

Manufacturer pre-install measurements, part identification, post-install checks and follow-up guidance. The article spans coil and leaf-spring vehicles; use only the applicable sections. Exact LC250 MT64/BP-51 component fitting sheets and setup values must be obtained separately.

ARB / Old Man Emu · checked 2026-10-25

Installation / assembly videos

No sufficiently matched installation video has been verified for this entry.

Component, family and different-vehicle references retain their scope; they do not certify the exact LC250 installation. Full video playback is not independently confirmed.

All documented configurations

Options stay within this product family. Compare the actual part number, contents and load selection.

Configuration	Part / component	Listed parts	Product mass
Front 0–330 lb added / Rear Stock load · 0 lb added	2220K	$4,280.55	Product weight unverified
Front 0–330 lb added / Rear 440 lb nominal constant load	2221K	$4,280.55	Product weight unverified
Front 0–330 lb added / Rear 880 lb nominal constant load	2222K	$4,280.55	Product weight unverified

Web-sourced user evidence

Selected source-linked paraphrases, not verified purchases or a representative failure-rate survey. Family and different-vehicle matches do not certify this SKU. No blended rating is inferred.

owner / LC250 BP-51 family; catalog load configuration differs

Owner forum report

Describes a more fluid, softer ride at the initial settings; notes damping can be adjusted.

LC250 with 3-inch BP-51 setup, Method 703 and 35-inch Toyos Self-reported owner/use; purchase and configuration not independently verified

Noveria_Corp · Source date unverified · checked 2026-10-25Read the original report ↗

owner / LC250 BP-51 family; unresolved individual report

Owner forum report

Reports rear shocks leaking about a month after installation and arranging a shop inspection.

LC250; exact spring/damper revision unconfirmed Self-reported owner/use; purchase and configuration not independently verified

TEQJ250 · Source date 2026-07-18 · checked 2026-10-25Read the original report ↗

Open build tools and community feedback →

Questions before buying

Is BP-51 · matched load system verified for every LC250?

US LC250 catalog listing; confirm the exact year, grade, powertrain and selected SKU before ordering. A catalog listing is not approval of your entire modified vehicle.

What does the price include?

Front coilovers, rear shocks, rear springs, UCAs and reservoir fitting kits The listed $4,280.55 covers selected configuration. Unpriced mounts, wiring, services, tax and shipping remain additional.

Is the installation time manufacturer-published?

This entry uses a researched professional planning estimate. Planning inference includes arms, reservoir mounting and damper setup beyond basic spring/shock work. No manufacturer whole-kit hours verified.

HELPFUL GUIDANCE