CONFIGMYRIGBUILD WITH A PLAN.BETA
AccountOpen build →
Rago Fabrication Rago LC250 exterior MOLLE panels for factory roof rails · supplier family reference

Official product-family photo. Exterior panel photo shows the pair; selected single-side option includes only that side. Accessories, lights, rack/rails and cargo pictured are separate unless listed.

NEW TO CATALOG Rago Fabrication

Rago LC250 exterior MOLLE panels for factory roof rails

Factory-rail mounted exterior rear-window MOLLE storage; choose pair or one side. Roof-rail drilling and riv-nuts required.

PART / COMPONENT ID AC7709201NA
LISTED PARTS / SELECTED CONFIGURATION$479.99

Source checked November 1, 2026. Tax, shipping, supporting parts and installation are additional.

Configure in my build →
PROFESSIONAL INSTALL1 hrPublished range
WEIGHTProduct weight unverifiedNet addition unverified
THE SELECTED CONFIGURATION

Specifications & fitment

Manufacturer / component part
AC7709201NA
Selected configuration
Pair
Vehicle fitment evidence
Manufacturer lists 2024+ Toyota Land Cruiser 250 and Lexus GX550 for this exact product. For US LC250 1958 / Land Cruiser / 2024 First Edition, confirm exact retained trim/rails and mounting configuration before ordering; a GX550 listing is not approval of every LC250 build.
Package contents
Two exterior panels (driver + passenger) and selected mounting parts from AC7709201NA/9301NA/9401NA guide. Containers, attachment pucks/accessories and factory rails separate; confirm packing list.
Critical specifications
Steel, hammer black panels with satin black mounts; RotopaX mounting provisions and MOLLE attachment slots. No verified complete mass, overall envelope or per-panel cargo rating.
Availability note
Vendor exact variant is listed orderable at source check; dispatch/lead-time and delivered price must be confirmed.
Product mass
Product weight unverified
Net added vehicle weight
Net addition unverified
Weight basis
Complete product assembly mass and net installed vehicle addition are unverified. Shopify commerce-weight fields are not used as installed mass; include hardware, added cargo and any factory parts removed when finalizing loads.
Professional installation
1 hr · Rago Fabrication published
Installation scope
Manufacturer fitting guide states approximately 1 hour for this product. Use the current exact-SKU guide; this is the manufacturer installation expectation, not a measured professional average or a complete combined build quote.
Fitment / supporting work
Factory roof rails are drilled and fitted with rivet nuts using the exact guide. Confirm panel clearance, lower window mounting, fastener torque and safe attachment loads. Pair and single-side configurations are different contents. Plan full fuel/water and container mass separately; integrated provisions do not include mounting pucks or capacity approval.

Why consider this?

Confirm the exact supporting mounting system and loaded clearances, then plan the related installation together with the rest of the cargo/roof build.

Required equipment & checks

Planning requirements for this product. Your exact vehicle and complete build still need confirmation.

included

Selected product / listed contents

Two exterior panels (driver + passenger) and selected mounting parts from AC7709201NA/9301NA/9401NA guide. Containers, attachment pucks/accessories and factory rails separate; confirm packing list.

check

Retained compatible factory roof rails

This version mounts to OEM rails, not the separate Rago full-roof-rack exterior-panel system. Crossbars are not stated as a required purchase.

Explore supporting equipment →
check

Mounting alterations and clearances

Factory roof rails are drilled and fitted with rivet nuts using the exact guide. Confirm panel clearance, lower window mounting, fastener torque and safe attachment loads. Pair and single-side configurations are different contents. Plan full fuel/water and container mass separately; integrated provisions do not include mounting pucks or capacity approval.

Explore supporting equipment →
quote

Unpublished mass and payload limits

Obtain complete selected assembly mass and actual load ratings from Rago. Include restraints, accessories and carried cargo; do not use shipping weight or assume zero additional load.

Explore supporting equipment →
check

Installation / compatibility notes

Factory roof rails are drilled and fitted with rivet nuts using the exact guide. Confirm panel clearance, lower window mounting, fastener torque and safe attachment loads. Pair and single-side configurations are different contents. Plan full fuel/water and container mass separately; integrated provisions do not include mounting pucks or capacity approval.

check

Installed net weight

Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

Where to buy

Same selected configuration, ordered by listed price. These are dated source snapshots, not live inventory or delivered quotes.

LOWEST LISTED OFFER

Rago Fabrication

AC7709201NA
$479.99Offer checked 2026-11-01View supplier →

Buy used or sell yours

Community listings are separate from verified supplier offers. Confirm condition, hardware and fitment with the seller.

Find this used Sell one like this

Installation instructions & videos

1 hr · published professional range. Manufacturer fitting guide states approximately 1 hour for this product. Use the current exact-SKU guide; this is the manufacturer installation expectation, not a measured professional average or a complete combined build quote.

Installation-time source →

Instructions & manuals

OFFICIAL MANUFACTURER / SUPPLIER · manual

Rago AC7709201NA fitting guide →

Exact LC250/GX550 product; shared pair/side SKUs where shown on cover

Exact maker PDF retrieved and reviewed. Approximately one hour published; drilling, supplied fasteners and supporting-product scope follow this guide. Confirm current revision and vehicle trim.

Rago Fabrication · checked 2026-11-01

Installation / assembly videos

OFFICIAL MANUFACTURER / SUPPLIER · VIDEO

Rago factory-roof-rail exterior MOLLE panel installation →

Manufacturer embeds this video in the exact product Install tab

Official product-linked fitting video. YouTube retrieval was throttled; full playback/uploader metadata not independently confirmed. Use current PDF for exact parts and torque.

Rago Fabrication · checked 2026-11-01

Component, family and different-vehicle references retain their scope; they do not certify the exact LC250 installation. Full video playback is not independently confirmed.

All documented configurations

Options stay within this product family. Compare the actual part number, contents and load selection.

ConfigurationPart / componentListed partsProduct mass
PairAC7709201NA$479.99Product weight unverified
DriverAC7709301NA$249.99Product weight unverified
PassengerAC7709401NA$249.99Product weight unverified

Web-sourced user evidence

Selected source-linked paraphrases, not verified purchases or a representative failure-rate survey. Family and different-vehicle matches do not certify this SKU. No blended rating is inferred.

No sufficiently matched first-person report has been added for this product. A listing or brand reputation is not counted as an owner review.

Open build tools and community feedback →

Questions before buying

Is Rago LC250 exterior MOLLE panels for factory roof rails verified for every LC250?

Manufacturer lists 2024+ Toyota Land Cruiser 250 and Lexus GX550 for this exact product. For US LC250 1958 / Land Cruiser / 2024 First Edition, confirm exact retained trim/rails and mounting configuration before ordering; a GX550 listing is not approval of every LC250 build. A catalog listing is not approval of your entire modified vehicle.

What does the price include?

Two exterior panels (driver + passenger) and selected mounting parts from AC7709201NA/9301NA/9401NA guide. Containers, attachment pucks/accessories and factory rails separate; confirm packing list. The listed $479.99 covers selected configuration. Unpriced mounts, wiring, services, tax and shipping remain additional.

Is the installation time manufacturer-published?

This entry carries a published range. Manufacturer fitting guide states approximately 1 hour for this product. Use the current exact-SKU guide; this is the manufacturer installation expectation, not a measured professional average or a complete combined build quote.

HELPFUL GUIDANCE

Understand the system before the part.

Compare related products