CONFIGMYRIGBUILD WITH A PLAN.BETA
AccountOpen build →
23ZERO 23ZERO Kabari Z aluminum Z-lift rooftop tent · supplier family reference

Official Kabari Z product detail photo. Rack, vehicle and other equipment are not included.

NEW TO CATALOG 23ZERO

23ZERO Kabari Z aluminum Z-lift rooftop tent

Two-person aluminum hard-shell tent with a second lifting section; a heavier alternative requiring a complete roof-load review.

PART / COMPONENT ID 230HSKABZ
LISTED PARTS / SELECTED CONFIGURATION$4,495.00

Source checked October 31, 2026 (America/Denver). Tax, shipping, supporting parts and installation are additional.

Configure in my build →
PROFESSIONAL INSTALL2–4 hrPlanning estimate
WEIGHT204 lb product massNet addition unverified
THE SELECTED CONFIGURATION

Specifications & fitment

Manufacturer / component part
230HSKABZ
Selected configuration
Kabari Z / 2 adults
Vehicle fitment evidence
Universal rack-mounted tent sold by the US manufacturer. Not an LC250-specific approval. For US 2024+ LC250 1958 / Land Cruiser / 2024 First Edition, obtain vehicle/rack approval for combined driving and occupied parked loads before ordering.
Package contents
Tent with supplied mounting rails/plates and telescopic ladder; confirm full current packing list. Vehicle rack, LC250 brackets and protected 12 V circuit are separate.
Critical specifications
Published mounting mass 204 lb; closed mounting footprint 55.25 W × 86.625 L × 9.5 H in including rails. Sleeping footprint 48 × 79.5 in; listed maximum internal height 58 in. Two adults; four-season design.
Availability note
Stock and dispatch timing are not independently confirmed; verify with the seller.
Product mass
204 lb product mass
Net added vehicle weight
Net addition unverified
Weight basis
204 lb is the manufacturer’s stated mounting weight, not a shipping weight or a verified complete net vehicle addition. Inclusion of ladder/loose accessories in that figure is unconfirmed. Rack, added brackets and wiring remain separate; reconcile before final load planning.
Professional installation
2–4 hr · researched planning estimate
Installation scope
2–4 hr researched professional planning estimate from the exact manual: unpack/assemble, organize the required lifting crew, position on a compatible existing rack, fasten/inspect, adjust ladder and test opening/closing. Person-hours versus elapsed multi-person time requires a shop quote. Rack installation, fabrication and a new protected 12 V circuit are additional; no manufacturer labor hours published.
Fitment / supporting work
Rack plus 204 lb published mounting mass and other roof equipment must fit the vehicle and rack limits. Check rail spacing, mounting access, hatch/sunroof/antenna clearance and final vehicle height. Manufacturer manual calls for at least four people when lifting into place; use a professional lifting arrangement. Sleeping capacity is not vehicle roof approval.

Why consider this?

Compare footprint and roof mass with lighter tent options before choosing the extra interior height.

Required equipment & checks

Planning requirements for this product. Your exact vehicle and complete build still need confirmation.

included

Selected product / listed contents

Tent with supplied mounting rails/plates and telescopic ladder; confirm full current packing list. Vehicle rack, LC250 brackets and protected 12 V circuit are separate.

check

Approved tent rack and mounting

A compatible rack and correctly spaced mounting arrangement are required; vehicle and rack capacity must support the full driving/parked load case.

Explore supporting equipment →
quote

Vehicle roof capacity and rack approval

Confirm combined rack/tent/awning mass against Toyota and rack driving limits, plus the occupied parked case. Do not infer approval from tent strength or sleeping capacity.

Explore supporting equipment →
check

Mount spacing, lifting and clearances

Use the exact mounting-channel drawing and supplied instructions. Confirm bolt access, lifting resources, hatch/antenna clearance and measured finished height.

Explore supporting equipment →
conditional

Optional tent power

If connecting the internal power system, quote correctly fused/protected 12 V wiring and a suitable vehicle supply; a tent is not a complete electrical installation.

Explore supporting equipment →
check

Installation / compatibility notes

Rack plus 204 lb published mounting mass and other roof equipment must fit the vehicle and rack limits. Check rail spacing, mounting access, hatch/sunroof/antenna clearance and final vehicle height. Manufacturer manual calls for at least four people when lifting into place; use a professional lifting arrangement. Sleeping capacity is not vehicle roof approval.

check

Installed net weight

Product weight or factory equipment removed is not fully verified. Do not use shipping weight or assume zero additional load.

Where to buy

Same selected configuration, ordered by listed price. These are dated source snapshots, not live inventory or delivered quotes.

LOWEST LISTED OFFER

23ZERO USA

230HSKABZ
$4,495.00Offer checked 2026-10-31View supplier →
SAME CONFIGURATION

Overland Kitted

230HSKABZ
$4,495.00Offer checked 2026-10-31View supplier →

Buy used or sell yours

Community listings are separate from verified supplier offers. Confirm condition, hardware and fitment with the seller.

Find this used Sell one like this

Installation instructions & videos

2–4 hr · researched professional planning estimate. 2–4 hr researched professional planning estimate from the exact manual: unpack/assemble, organize the required lifting crew, position on a compatible existing rack, fasten/inspect, adjust ladder and test opening/closing. Person-hours versus elapsed multi-person time requires a shop quote. Rack installation, fabrication and a new protected 12 V circuit are additional; no manufacturer labor hours published.

Installation-time source →

Instructions & manuals

OFFICIAL MANUFACTURER / SUPPLIER · guide

Kabari Z user and roof-rack installation manual →

Exact Kabari Z tent; not LC250 rack approval

Mounting channels, supplied hardware, lifting, ladder and setup. Follow the current supplied revision and obtain vehicle/rack approval.

23ZERO · checked 2026-10-31

Installation / assembly videos

No sufficiently matched installation video has been verified for this entry.

Component, family and different-vehicle references retain their scope; they do not certify the exact LC250 installation. Full video playback is not independently confirmed.

Exact catalog configuration

The catalog currently documents this selected configuration.

ConfigurationPart / componentListed partsProduct mass
Kabari Z / 2 adults230HSKABZ$4,495.00204 lb product mass

Web-sourced user evidence

Selected source-linked paraphrases, not verified purchases or a representative failure-rate survey. Family and different-vehicle matches do not certify this SKU. No blended rating is inferred.

No sufficiently matched first-person report has been added for this product. A listing or brand reputation is not counted as an owner review.

Open build tools and community feedback →

Questions before buying

Is 23ZERO Kabari Z aluminum Z-lift rooftop tent verified for every LC250?

Universal rack-mounted tent sold by the US manufacturer. Not an LC250-specific approval. For US 2024+ LC250 1958 / Land Cruiser / 2024 First Edition, obtain vehicle/rack approval for combined driving and occupied parked loads before ordering. A catalog listing is not approval of your entire modified vehicle.

What does the price include?

Tent with supplied mounting rails/plates and telescopic ladder; confirm full current packing list. Vehicle rack, LC250 brackets and protected 12 V circuit are separate. The listed $4,495.00 covers selected configuration. Unpriced mounts, wiring, services, tax and shipping remain additional.

Is the installation time manufacturer-published?

This entry uses a researched professional planning estimate. 2–4 hr researched professional planning estimate from the exact manual: unpack/assemble, organize the required lifting crew, position on a compatible existing rack, fasten/inspect, adjust ladder and test opening/closing. Person-hours versus elapsed multi-person time requires a shop quote. Rack installation, fabrication and a new protected 12 V circuit are additional; no manufacturer labor hours published.

HELPFUL GUIDANCE

Understand the system before the part.

Compare related products