Thule WingBar Edge LC250 raised-rail rack

Specifications & fitment

Manufacturer / component part

720401 + 2×721320

Selected configuration

Black

Vehicle fitment evidence

Retailer lists US 2024+ Land Cruiser 250; etrailer confirms exact black component combination on 2024–2026 raised-rail vehicles and demonstrates a 2026 LC250 install. Applies to 1958/Land Cruiser/2024 First Edition ONLY when compatible raised rails are actually present. Bare roof and flush rails excluded. Thule direct vehicle-specific fit output was not obtained; reconfirm exact year/rail arrangement.

Package contents

Four Thule Edge Raised Rail feet 720401 and two 86 cm/34 in WingBar Edge bars 721320. Retailer-assembled component kit; no separate manufacturer bundle SKU asserted. One-Key lock cores and cargo carriers separate.

Critical specifications

Two 86 cm/34 in bars; manufacturer bar dimensions 34×3.1×1.2 in and loading width 29–33 in. Maker foot rating up to 165 lb, subject to lower vehicle/rail/accessory limits; not an LC250 roof capacity or rooftop-tent approval.

Product mass

Product weight unverified

Net added vehicle weight

Net addition unverified

Weight basis

Maker lists 2.54 lb per 86 cm bar (5.08 lb for two bars only). Four feet, all hardware and any removed OEM crossbars are not fully weighed; complete gross/net installed mass remains unknown. Do not use the 165 lb load rating as product mass.

Professional installation

0.75–1.5 hr · researched planning estimate

Installation scope

Researched professional estimate:0.75–1.5 hours to inspect existing raised rails, remove conflicting crossbars if present, assemble bars/feet, measure/position both bars, tighten with the supplied torque tool and check clearances/recheck attachment. Based on exact 720401 maker instructions and etrailer 2026 LC250 fitting video. No published manufacturer shop hours; rail installation, lock fitting, carriers and fabrication additional.

Fitment / supporting work

These are fit-selected rack components for raised rails, not an LC250-only design. The rack price includes both bars and all four feet; accessories/locks and any needed roof rails are additional.

Required equipment & checks

Planning requirements for this product. Your exact vehicle and complete build still need confirmation.

Where to buy

Same selected configuration, ordered by listed price. These are dated source snapshots, not live inventory or delivered quotes.

Buy used or sell yours

Community listings are separate from verified supplier offers. Confirm condition, hardware and fitment with the seller.

Installation instructions & videos

0.75–1.5 hr · researched professional planning estimate. Researched professional estimate:0.75–1.5 hours to inspect existing raised rails, remove conflicting crossbars if present, assemble bars/feet, measure/position both bars, tighten with the supplied torque tool and check clearances/recheck attachment. Based on exact 720401 maker instructions and etrailer 2026 LC250 fitting video. No published manufacturer shop hours; rail installation, lock fitting, carriers and fabrication additional.

Instructions & manuals

Installation / assembly videos

Component, family and different-vehicle references retain their scope; they do not certify the exact LC250 installation. Full video playback is not independently confirmed.

All documented configurations

Options stay within this product family. Compare the actual part number, contents and load selection.

Web-sourced user evidence

Selected source-linked paraphrases, not verified purchases or a representative failure-rate survey. Family and different-vehicle matches do not certify this SKU. No blended rating is inferred.

No sufficiently matched first-person report has been added for this product. A listing or brand reputation is not counted as an owner review.

Open build tools and community feedback →